1. ບົດແນະນຳ
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo Dm10 1Hp Electric Pump. Please read this manual thoroughly before using the pump and retain it for future reference.
The Pedrollo Dm10 electric pump is designed for draining clear or slightly dirty water. It is suitable for domestic, civil, and professional applications, including dewatering flooded areas such as basements, garages, and for emptying swimming pools or bathtubs. This pump is also effective for the disposal of non-corrosive wastewater. Its reliability is a key feature, especially in fixed installations with automatic operation.
Key features include a flow rate of up to 300 liters/minute (18 m³/h), a head of up to 16 meters, and a 0.75 kW (1 HP) motor. It comes with a 5-meter cable and a Schuko plug.
2. ຂໍ້ມູນຄວາມປອດໄພ
ໃຫ້ປະຕິບັດຕາມຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ສະເໝີເພື່ອປ້ອງກັນການບາດເຈັບສ່ວນຕົວ ແລະ ຄວາມເສຍຫາຍຕໍ່ປໍ້າ:
- ຄວາມປອດໄພທາງໄຟຟ້າ: ໃຫ້ແນ່ໃຈວ່າການສະຫນອງພະລັງງານກົງກັບ vol ຂອງປັ໊ມtage (220-240V AC). Always connect the pump to a properly grounded outlet. Do not operate the pump with damaged cables or plugs. Never touch the pump or its electrical connections with wet hands.
- ຄຸນະພາບນ້ໍາ: This pump is designed for clear or slightly dirty water. Do not use it for flammable, corrosive, explosive, or chemically aggressive liquids.
- ການໃຕ້ນ້ຳ: The pump must be fully submerged during operation to ensure proper cooling. Operating the pump dry will cause severe damage.
- ເດັກນ້ອຍແລະສັດລ້ຽງ: Keep children and pets away from the pump and the area of operation.
- ບໍາລຸງຮັກສາ: Always disconnect the pump from the power supply before performing any maintenance, cleaning, or inspection.
- ການຕິດຕັ້ງ: Ensure the pump is placed on a stable, level surface. Do not suspend the pump by its power cable.
3. ຜະລິດຕະພັນເກີນview
The Pedrollo Dm10 is a robust electric submersible pump designed for efficient water transfer and drainage. It features a durable construction and an integrated float switch for automatic operation.
ຮູບທີ 1: Pedrollo Dm10 1Hp Electric Pump. This image shows the pump's silver body, blue base, orange handle, and power cable with a float switch, indicating its compact and functional design.
ອົງປະກອບທີ່ສໍາຄັນ:
- Pump Body: Houses the motor and impeller.
- Base/Inlet Grille: Allows water entry and filters out larger debris.
- Discharge Outlet: Connects to the discharge hose.
- ສະຫຼັບ Float: Automatically turns the pump on/off based on water level.
- ສາຍໄຟ: Connects the pump to the electrical supply.
- ມືຈັບ: For easy transport and positioning.
4. ຕັ້ງຄ່າ
- ການຫຸ້ມຫໍ່: Carefully remove the pump from its packaging. Inspect for any signs of damage during transit.
- ການຈັດວາງ: Position the pump on a stable, flat surface in the area to be drained. Ensure the pump is fully submerged in water during operation. The float switch must have sufficient space to move freely to activate and deactivate the pump.
- ການເຊື່ອມຕໍ່ທໍ່ລະບາຍ: Connect a suitable discharge hose to the pump's outlet. Ensure the connection is secure to prevent leaks. The hose should be routed to a safe drainage point, away from the area being dewatered.
- ການເຊື່ອມຕໍ່ໄຟຟ້າ: Connect the pump's 5-meter power cable with the Schuko plug to a grounded 220-240V AC electrical outlet. Ensure the outlet is protected by a Residual Current Device (RCD) for added safety.
- ການປັບສະວິດລອຍ: Adjust the position of the float switch cable to set the desired ON/OFF water levels. The pump will start when the float rises to a horizontal position and stop when it drops below a certain level.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
ການດໍາເນີນງານອັດຕະໂນມັດ:
The Pedrollo Dm10 pump is equipped with an integrated float switch for automatic operation. Once connected to power and submerged, the pump will automatically start when the water level rises and lifts the float switch. It will then pump water until the level drops sufficiently for the float switch to fall, turning the pump off.
- Ensure the float switch is free to move and not obstructed by walls or debris.
- Verify that the discharge hose is clear and properly routed.
- Plug the pump into a suitable electrical outlet. The pump will activate when the water level reaches the set 'ON' point of the float switch.
- The pump will stop automatically when the water level drops to the set 'OFF' point.
ການປະຕິບັດດ້ວຍຄູ່ມື (ຖ້າມີ):
While primarily designed for automatic use, some models may allow for manual override by securing the float switch in an 'ON' position. However, this requires constant supervision to prevent dry running and pump damage. Always refer to specific model instructions for manual operation.
6. ບໍາລຸງຮັກສາ
ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງປໍ້າຂອງທ່ານ. ໃຫ້ຖອດປໍ້າອອກຈາກແຫຼ່ງຈ່າຍໄຟສະເໝີກ່ອນການບຳລຸງຮັກສາໃດໆ.
- Cleaning the Inlet Grille: Periodically inspect and clean the inlet grille at the base of the pump to remove any debris (leaves, small stones, etc.) that may obstruct water flow.
- ການກວດສອບ Impeller: If the pump's performance decreases, the impeller might be clogged. Disconnect power, remove the base plate (if accessible), and carefully clear any obstructions from the impeller.
- ການກວດກາສາຍ ແລະປລັກ: Regularly check the power cable and plug for any signs of damage, cuts, or fraying. Replace immediately if damage is found.
- ການເກັບຮັກສາ: If the pump will not be used for an extended period, clean it thoroughly, drain all water, and store it in a dry, frost-free location.
7. ການແກ້ໄຂບັນຫາ
ກ່ອນທີ່ຈະຕິດຕໍ່ສະຫນັບສະຫນູນດ້ານວິຊາການ, review ບັນຫາທົ່ວໄປ ແລະວິທີແກ້ໄຂບັນຫາຕໍ່ໄປນີ້:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ປັ໊ມບໍ່ເລີ່ມຕົ້ນ. |
|
|
| ປ້ຳເຮັດວຽກແຕ່ບໍ່ມີນ້ຳໄຫຼອອກ ຫຼື ນ້ຳໄຫຼຕໍ່າ. |
|
|
| ປັ໊ມຢຸດໂດຍບໍ່ຄາດຄິດ. |
|
|
If problems persist after following these steps, please contact qualified service personnel.
8. ຂໍ້ມູນຈໍາເພາະ
| ຜູ້ຜະລິດ | ເປໂດຣໂລ |
| ຕົວແບບອ້າງອີງ | Dm 10 5MT |
| ພະລັງງານ | 0.75 kW (1 HP) |
| ສະບັບtage | 220-240 Volts (AC) |
| ອັດຕາການໄຫຼສູງສຸດ | 300 Liters per minute (18 m³/h) |
| ຫົວສູງສຸດ | 16 ແມັດ |
| ຄວາມຍາວສາຍ | 5 ແມັດ |
| ແຫຼ່ງພະລັງງານ | ສາຍໄຟຟ້າ |
| ນ້ໍາຫນັກລາຍການ | 10 ກິໂລກຣາມ |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Specific warranty details are typically provided at the point of purchase or within separate documentation accompanying the product. Please refer to your purchase receipt or contact the retailer for warranty information.
For technical support, spare parts, or service inquiries, please contact your authorized Pedrollo dealer or the customer service department of your retailer. When contacting support, please have your pump's model number (Dm 10 5MT) and purchase date available.
