ແນະນຳ
The Maximum IRB-100 IR Bender, Model 1262, is an infrared (IR) remote control extender designed to allow you to control up to three IR-controlled devices that are out of sight or located in a cabinet. It receives IR signals from your remote control and re-transmits them via three included IR emitting probes to your target devices. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
ຕັ້ງຄ່າ
ເນື້ອໃນຊຸດ
- 1 x Maximum IRB-100 IR Bender Main Unit
- 3 x IR Emitting Probes
- 1 x AC Adapter (230V)
- 1 x Mounting Set
ການເຊື່ອມຕໍ່ພະລັງງານ
The IRB-100 can be powered using either the included 230V AC adapter or a 5V USB power source. Connect the appropriate power cable to the power input port on the main unit. Ensure the power source is stable and provides the correct voltage.
Connecting IR Emitting Probes
Connect each of the three IR emitting probes to the designated output ports on the IRB-100 main unit. These probes will transmit the IR signals to your devices. Each probe has a 2-meter cable length for flexible placement.
ການຈັດວາງແລະການຕິດຕັ້ງ
Position the IRB-100 main unit in a location where it can easily receive IR signals from your remote control. The unit features LED indicators to confirm signal reception. Place the IR emitting probes directly over the IR receiver window of each device you wish to control. The included mounting set can be used to secure the main unit or probes if desired, ensuring optimal signal transmission and reception.
This image shows the Maximum IRB-100 IR Bender main unit, demonstrating the connection points for the power supply and the three IR emitting probes. The compact design allows for discreet placement near your entertainment system.
ຄໍາແນະນໍາການດໍາເນີນງານ
ການດໍາເນີນງານພື້ນຖານ
Once the IRB-100 is powered on and the IR emitting probes are correctly positioned, simply point your remote control at the main unit. The IRB-100 will receive the IR signal and instantly re-transmit it through the connected probes to control your hidden devices. The system supports controlling up to three devices simultaneously.
ຕົວຊີ້ວັດ LED
The IRB-100 unit is equipped with LED indicators. These LEDs illuminate to confirm that the unit is powered on and actively receiving IR signals from your remote control. If the LEDs do not light up when a remote signal is sent, refer to the Troubleshooting section.
ຂອບເຂດ ແລະປະສິດທິພາບ
The IRB-100 offers a maximum reception range of 5 meters (approximately 16 feet) for your remote control. It operates within a working frequency of 433.92MHz and an IR frequency range of 30-60kHz, ensuring compatibility with a wide array of standard IR remote controls.
ບໍາລຸງຮັກສາ
To ensure the longevity and optimal performance of your Maximum IRB-100 IR Bender, follow these simple maintenance guidelines:
- ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the main unit and probes. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the device.
- ການເກັບຮັກສາ: ເມື່ອບໍ່ໄດ້ໃຊ້ເປັນເວລາດົນ, ໃຫ້ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງແລ້ງຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມທີ່ຮຸນແຮງ.
- ການຈັດການ: Handle the unit and probes with care. Avoid dropping or subjecting them to strong impacts.
ການແກ້ໄຂບັນຫາ
If you encounter issues with your IRB-100 IR Bender, please consult the following troubleshooting steps:
ບໍ່ມີພະລັງງານ
- ກວດເບິ່ງການເຊື່ອມຕໍ່ພະລັງງານ: Ensure the AC adapter or USB power cable is securely connected to the IRB-100 and the power outlet/USB port.
- ຢືນຢັນແຫຼ່ງພະລັງງານ: Confirm that the power outlet or USB port is functional. Try plugging in another device to test it.
- ກວດສອບສາຍ: ກວດເບິ່ງສາຍໄຟສໍາລັບຄວາມເສຍຫາຍທີ່ເຫັນໄດ້.
ອຸປະກອນບໍ່ຕອບສະໜອງ
- ການຈັດວາງ Probe: Ensure each IR emitting probe is positioned directly over the IR receiver window of the target device. Slight adjustments may be necessary.
- IR Bender Reception: Confirm that the IRB-100 main unit is receiving signals from your remote control (check LED indicators). Ensure there are no obstructions between your remote and the main unit.
- ການທໍາງານຂອງການຄວບຄຸມໄລຍະໄກ: Test your remote control with the device directly to ensure it is working correctly.
- ຈໍານວນອຸປະກອນ: The unit supports up to 3 devices. Ensure you are not attempting to control more than this.
ຂອບເຂດຈໍາກັດ
- ອຸປະສັກ: Ensure there is a clear line of sight between your remote control and the IRB-100 main unit.
- ແຊກແຊງ: Minimize potential sources of IR interference, such as direct sunlight or strong fluorescent lighting, near the main unit.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 1262 |
| ຍີ່ຫໍ້ | ສູງສຸດ |
| ຂະໜາດສິນຄ້າ (L x W x H) | 0.79 x 3.94 x 1.77 ນິ້ວ (20 x 100 x 45 ມມ) |
| ນ້ໍາຫນັກລາຍການ | 6.4 ອອນສ໌ (180g) |
| ການສະຫນອງພະລັງງານ | AC 230V, DC 5V (USB) |
| ຮວມອະແດບເຕີ AC | ແມ່ນແລ້ວ |
| Maximum IR Reception Range | 5 ແມັດ |
| ຈຳນວນຂອງ USB 2.0 Ports | 1 (for power) |
| ສີຜະລິດຕະພັນ | ດຳ |
| ຄວາມຖີ່ຂອງການເຮັດວຽກ | 433.92MHz |
| ຕົວຊີ້ວັດ LED | ແມ່ນແລ້ວ |
| ການໂຕ້ຕອບ | Wireless IR |
| Mounting Set Included | ແມ່ນແລ້ວ |
| Cable Length (Probes) | 2 ແມັດ |
| ຈຳນວນອຸປະກອນທີ່ຮອງຮັບ | 3 |
| ໜ້າຈໍໃນຕົວ | ບໍ່ |
| Frequency Range (IR) | 30-60kHz |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | IR-controlled devices |
ຂໍ້ມູນການຮັບປະກັນ
For detailed warranty terms and conditions, please refer to the official website of Maximum or the product packaging. It is recommended to retain your proof of purchase for any potential warranty claims.
ການຊ່ວຍເຫຼືອລູກຄ້າ
Should you require technical assistance, have questions regarding setup or operation, or need further support, please contact Maximum customer support. Contact details, including phone numbers and email addresses, can typically be found on the manufacturer's official webສະຖານທີ່ ຫຼື ພາຍໃນເອກະສານຜະລິດຕະພັນ.
