1. ບົດແນະນຳ
The Kanlux JVT3-16D is a versatile programmable digital timer designed for various electrical control applications. This device allows for precise scheduling of electrical circuits, offering convenience and energy efficiency. It supports up to 18 distinct programs for daily or weekly operation.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- Programmable digital timer.
- Minimum time setting: 1 minute.
- Display precision: 1 second.
- Accuracy: +/- 2 seconds per 24 hours.
- Up to 18 programmable events (ON/OFF cycles).
- Daily or weekly programming options.
- Designed for distributor installation (DIN rail compatible).
- Occupies 2 division units on a DIN rail.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the device.
- ການຕິດຕັ້ງຕ້ອງໄດ້ຮັບການປະຕິບັດໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິຕາມລະຫັດໄຟຟ້າທ້ອງຖິ່ນແລະແຫ່ງຊາດທັງຫມົດ.
- Ensure the main power supply is disconnected before installing, wiring, or servicing the timer.
- Do not exceed the maximum load rating of the timer.
- ຢ່າໃຫ້ອຸປະກອນຖືກຄວາມຊຸ່ມຊື່ນ, ນ້ຳ ຫຼື ອຸນຫະພູມສູງເກີນໄປ.
- ອຸປະກອນນີ້ມີຈຸດປະສົງເພື່ອໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
3. ຜະລິດຕະພັນເກີນview
The Kanlux JVT3-16D digital timer features a compact design suitable for DIN rail mounting. It includes a digital display for time and program settings, along with control buttons for programming and manual override.
ຮູບທີ 1: ດ້ານໜ້າ view of the Kanlux JVT3-16D Digital Timer. This image shows the compact white housing, the digital display panel, and the Kanlux JVT3-16D branding. Terminal connections are visible at the top and bottom for electrical wiring.
ອົງປະກອບ:
- ຈໍດິຈິຕອນ: Shows current time, day, and programming parameters.
- ປຸ່ມຄວບຄຸມ: Used for setting time, programming events, and manual control.
- ສະຖານີ: Input and output connections for electrical wiring.
- ຄລິບລົດໄຟ DIN: ສໍາລັບການຕິດຕັ້ງທີ່ປອດໄພໃນລົດໄຟມາດຕະຖານ DIN.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
The JVT3-16D timer is designed for installation within an electrical distribution board, typically mounted on a DIN rail.
ຂັ້ນຕອນການຕິດຕັ້ງ:
- ການຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ: Ensure the main power supply to the distribution board is completely switched off before commencing installation. Verify with a voltage ເຄື່ອງທົດສອບ.
- ການຕິດຕັ້ງ: Clip the timer onto a standard 35mm DIN rail. The device occupies two standard division units.
- ສາຍໄຟ: Connect the input power supply and the load to be controlled to the appropriate terminals as indicated on the device. Refer to the wiring diagram printed on the timer or in the full product documentation. Ensure all connections are secure.
- ການຟື້ນຟູພະລັງງານ: Once installation and wiring are complete and verified, restore power to the distribution board.
- ການເພີ່ມພະລັງງານເບື້ອງຕົ້ນ: Upon first power-up, the display may be blank or show default settings. The internal battery will maintain settings during power outages once charged.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
This section outlines how to set the current time and program ON/OFF events for the Kanlux JVT3-16D timer. Specific button names are generalized as they are not provided in the product data.
5.1. ການກຳນົດເວລາ ແລະ ມື້ປັດຈຸບັນ
- ກົດ "CLOCK" button (or equivalent time-setting button). The hour display will start flashing.
- ໃຊ້ "HOUR" ແລະ "MINUTE" buttons to adjust the current hour and minute.
- ກົດ "DAY" button to select the current day of the week.
- ກົດ "CLOCK" ອີກເທື່ອໜຶ່ງເພື່ອຢືນຢັນ ແລະອອກຈາກໂໝດການຕັ້ງຄ່າເວລາ.
5.2. ກິດຈະກຳເປີດ/ປິດການຂຽນໂປຣແກຣມ
ໂມງຈັບເວລາຮອງຮັບໂປຣແກຣມເປີດ/ປິດໄດ້ສູງສຸດ 18 ໂປຣແກຣມ. ແຕ່ລະໂປຣແກຣມປະກອບດ້ວຍເວລາເປີດ ແລະ ເວລາປິດ.
- ກົດ "PROG" button (or equivalent program button). The display will show "1 ON" (for program 1 ON time).
- ໃຊ້ "HOUR" ແລະ "MINUTE" ປຸ່ມເພື່ອຕັ້ງເວລາເປີດທີ່ຕ້ອງການສຳລັບໂປຣແກຣມ 1.
- ກົດ "DAY" button to select the days of the week for this program. Options typically include: every day, weekdays, weekends, specific days (e.g., Mon-Wed-Fri), or individual days.
- ກົດ "PROG" again. The display will show "1 OFF" (for program 1 OFF time).
- Set the desired OFF time and days using the "HOUR", "MINUTE", ແລະ "DAY" ປຸ່ມ.
- Repeat steps 1-5 for additional programs (2 ON/OFF, 3 ON/OFF, up to 18 ON/OFF).
- ຫຼັງຈາກການຕັ້ງຄ່າໂຄງການທີ່ຕ້ອງການທັງຫມົດ, ໃຫ້ກົດປຸ່ມ "CLOCK" button to exit programming mode and return to normal operation.
5.3. ການຍົກເລີກດ້ວຍຕົນເອງ
The timer usually includes a manual override function to temporarily switch the output ON or OFF, independent of the programmed schedule.
- ກົດ "MANUAL" or "ON/AUTO/OFF" button (or equivalent) to cycle through modes: ON, AUTO, OFF.
- ເປີດ: Output is continuously ON.
- ປິດ: Output is continuously OFF.
- ອັດຕະໂນມັດ: ໂມງຈັບເວລາເຮັດວຽກຕາມຕາຕະລາງທີ່ກໍານົດໄວ້.
5.4. Resetting the Timer
To clear all settings and return the timer to its factory default state, locate the small reset button (often recessed) and press it using a pointed object (e.g., a pen tip). This will erase all programmed events and reset the current time.
6. ບໍາລຸງຮັກສາ
The Kanlux JVT3-16D digital timer requires minimal maintenance.
- ທໍາຄວາມສະອາດ: Wipe the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners, solvents, or allow moisture to enter the device.
- ແບັດເຕີຣີ: The timer contains an internal rechargeable battery to maintain settings during power outages. This battery is typically maintenance-free and has a long lifespan. If the display is consistently blank after a power outage, the battery may need replacement by a qualified technician.
7. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຈໍສະແດງໂມງຈັບເວລາວ່າງເປົ່າ. | No power supply. Internal battery discharged. | Check power connections. Allow time for internal battery to charge (typically 24 hours after initial power-up). If problem persists, consult a technician. |
| ໂຄງການບໍ່ດໍາເນີນການ. | Timer is in manual ON/OFF mode. Incorrect time/day setting. Programs not correctly set. | Ensure the timer is in "AUTO" mode. Verify current time and day settings. Re-check programmed ON/OFF times and days. |
| Load does not switch ON/OFF. | Incorrect wiring. Faulty load. Timer malfunction. | Verify wiring connections (ensure power is off). Test the load directly. If wiring and load are correct, the timer may be faulty; seek professional assistance. |
| Time drifts significantly. | Normal accuracy variation. | The timer has an accuracy of +/- 2 seconds per 24 hours. Minor adjustments may be needed periodically. |
8. ຂໍ້ມູນຈໍາເພາະ
| ຍີ່ຫໍ້: | Kanlux |
| ໝາຍເລກຕົວແບບ: | JVT3-16D (Manufacturer Reference: 18720) |
| ຈໍານວນໂຄງການ: | 18 |
| Minimum Time Setting: | 1 ນາທີ |
| Display Precision: | 1 ວິນາທີ |
| ຄວາມຖືກຕ້ອງ: | +/- 2 seconds / 24 hours |
| ປະເພດການຕິດຕັ້ງ: | DIN Rail (2 division units) |
| ASIN: | B00HN9ALDW |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Warranty information for the Kanlux JVT3-16D Digital Timer is typically provided with the product at the time of purchase. Please refer to the documentation included in the product packaging for specific warranty terms and conditions.
For technical support, service, or inquiries regarding spare parts, please contact your retailer or visit the official Kanlux website. Information regarding spare parts availability is currently unavailable through general product data.
