1. ບົດແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your ICY BOX IB-254U3 External USB 3.0 Enclosure. This device is designed to house a 2.5-inch SATA I/II/III Hard Disk Drive (HDD) or Solid State Drive (SSD), transforming it into a portable external storage solution with high-speed USB 3.0 connectivity and UASP support.
ກະລຸນາອ່ານຄູ່ມືນີ້ຢ່າງລະອຽດກ່ອນທີ່ຈະນໍາໃຊ້ຜະລິດຕະພັນເພື່ອຮັບປະກັນການເຮັດວຽກທີ່ເຫມາະສົມແລະປ້ອງກັນຄວາມເສຍຫາຍ.
2. ເນື້ອໃນຊຸດ
- ICY BOX IB-254U3 Enclosure
- ແຂນປ້ອງກັນຊິລິໂຄນ
- USB 3.0 Cable
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
3. ຜະລິດຕະພັນເກີນview
The ICY BOX IB-254U3 features a durable aluminum housing for efficient heat dissipation and a removable silicone sleeve for added protection. It supports 2.5-inch SATA drives up to 9.5mm in height and offers tool-free installation for convenience.
ຮູບພາບ 1: ດ້ານຫນ້າ view of the ICY BOX IB-254U3 external enclosure, encased in its protective silicone sleeve.
ຮູບພາບທີ 2: ໄລຍະໃກ້ view of the USB 3.0 port and the green LED indicator on the side of the enclosure.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps to install your 2.5-inch SATA HDD or SSD into the ICY BOX IB-254U3 enclosure.
- Remove Silicone Sleeve: Gently slide the silicone protective sleeve off the aluminum enclosure.
- Open Enclosure: Slide the internal tray out from the aluminum housing. This is a tool-free process.
- Install HDD/SSD: Connect your 2.5-inch SATA HDD or SSD to the SATA connector on the internal tray. Ensure the drive is securely seated. The enclosure supports drives up to 9.5mm in height.
- Secure Drive: If a protective film is provided, apply it to the underside of the drive's PCB to prevent short circuits.
- ປິດ Enclosure: Carefully slide the internal tray, with the installed drive, back into the aluminum housing until it clicks into place.
- Re-attach Silicone Sleeve: Slide the silicone protective sleeve back onto the enclosure for enhanced protection.
Image 3: The ICY BOX IB-254U3 enclosure with the silicone sleeve removed, revealing the aluminum casing and the internal drive tray partially visible.
ຮູບພາບ 4: ເທິງລົງລຸ່ມ view of the ICY BOX IB-254U3 enclosure with the internal drive tray fully inserted into the aluminum housing.
ຮູບພາບ 5: ມຸມ view of the ICY BOX IB-254U3 enclosure with the silicone protective sleeve fully re-attached, ready for use.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1 ເຊື່ອມຕໍ່ກັບຄອມພິວເຕີ້
Use the provided USB 3.0 cable to connect the enclosure to an available USB port on your computer (PC, Mac, or Linux system). For optimal performance, connect to a USB 3.0 port.
- Connect the micro-B end of the USB 3.0 cable to the enclosure's port.
- Connect the standard USB-A end of the cable to your computer's USB port.
5.2 ຕົວຊີ້ວັດ LED
The enclosure features an LED indicator:
- ສີຂຽວແຂງ: Indicates the enclosure is powered on and connected.
- ກະພິບສີຂຽວ: Indicates data activity (read/write operations) on the installed drive.
5.3 Drive Recognition and Formatting
Upon connecting, your operating system should automatically detect the new storage device. If the drive is new, it may need to be initialized, partitioned, and formatted before use. Refer to your operating system's documentation for instructions on disk management.
5.4 UASP Support
The IB-254U3 supports UASP (USB Attached SCSI Protocol), which can significantly increase data transfer speeds, especially with SSDs, when connected to a UASP-enabled USB 3.0 port on a compatible operating system (e.g., Windows 8/10/11, macOS, Linux).
6. ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the enclosure. Avoid liquid cleaners or abrasive materials.
- ການເກັບຮັກສາ: ເກັບຮັກສາຕູ້ໄວ້ໃນບ່ອນເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງແລະອຸນຫະພູມທີ່ຮຸນແຮງ.
- ການຈັດການ: While the silicone sleeve provides protection, avoid dropping or subjecting the enclosure to strong impacts.
- ການກຳຈັດທີ່ປອດໄພ: Always safely eject or unmount the drive from your operating system before disconnecting the USB cable to prevent data corruption.
7. ການແກ້ໄຂບັນຫາ
- ບໍ່ກວດພົບ Drive:
- ໃຫ້ແນ່ໃຈວ່າສາຍ USB ໄດ້ເຊື່ອມຕໍ່ກັບທັງຕູ້ ແລະ ຄອມພິວເຕີຢ່າງແໜ້ນໜາແລ້ວ.
- ລອງເຊື່ອມຕໍ່ກັບຜອດ USB ອັນອື່ນຢູ່ໃນຄອມພິວເຕີຂອງທ່ານ.
- Verify that the HDD/SSD is correctly installed and seated within the enclosure's SATA connector.
- ກວດສອບ Disk Management (Windows) ຫຼື Disk Utility (macOS) ຂອງຄອມພິວເຕີຂອງທ່ານເພື່ອເບິ່ງວ່າໄດຣຟ໌ຖືກຮັບຮູ້ແຕ່ບໍ່ໄດ້ເລີ່ມຕົ້ນ ຫຼື ບໍ່ໄດ້ຟໍແມັດ.
- Test the HDD/SSD in another enclosure or directly connect it to a computer (if possible) to rule out drive failure.
- ຄວາມໄວການໂອນຂໍ້ມູນຊ້າ:
- ໃຫ້ແນ່ໃຈວ່າທ່ານໄດ້ເຊື່ອມຕໍ່ກັບພອດ USB 3.0 ໃນຄອມພິວເຕີຂອງທ່ານ. ພອດ USB 2.0 ຈະເຮັດວຽກດ້ວຍຄວາມໄວທີ່ຕ່ຳກວ່າຫຼາຍ.
- Verify that your operating system and drivers support UASP for optimal performance.
- Check the health and fragmentation status of your installed HDD/SSD.
- ຕົວຊີ້ວັດ LED ບໍ່ສະຫວ່າງ:
- Confirm the USB cable is properly connected and providing power.
- ລອງໃຊ້ພອດ USB ຫຼືສາຍອື່ນ.
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຕົວແບບ | IB-254U3 |
| ຍີ່ຫໍ້ | ຕູ້ເຢັນ |
| ຄວາມເຂົ້າກັນໄດ້ຂອງ Drive | ຮາດດິດ/SSD SATA I/II/III ຂະໜາດ 2.5 ນິ້ວ |
| Max Drive ຄວາມສູງ | 9.5 ມມ |
| ການໂຕ້ຕອບພາຍໃນ | SATA III (up to 6 Gbit/s) |
| ການໂຕ້ຕອບພາຍນອກ | USB 3.0 (up to 5 Gbit/s) with UASP |
| ວັດສະດຸ | Aluminum, Plastic, Silicone |
| ຂະໜາດ (L x W x H) | 12.7 x 8.2 x 1.7 cm |
| ນ້ຳໜັກ | 170 g |
| ສະຫນັບສະຫນູນລະບົບປະຕິບັດງານ | Windows, macOS, Linux |
| ການສະຫນອງພະລັງງານ | USB powered |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ICY BOX products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official ICY BOX website. For technical support or further assistance, please contact your retailer or the ICY BOX customer support team.
ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
