1. ບົດແນະນຳ
This manual provides essential information for the safe and efficient operation of your TROTEC IDE 20 D diesel heater. Please read these instructions carefully before initial use and keep them for future reference. The TROTEC IDE 20 D is a direct-fired diesel heater designed for heating well-ventilated areas, offering a nominal heat output of 20 kW and an air flow of 595 m³/h.
ຮູບພາບ 1: ຫຼັກ view of the TROTEC IDE 20 D Diesel Heater, showing its robust design with wheels and handle for portability.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ສະເໝີເພື່ອປ້ອງກັນການບາດເຈັບ ຫຼືຄວາມເສຍຫາຍຕໍ່ອຸປະກອນ:
- Ensure adequate ventilation when operating the heater, as it is a direct-fired unit and consumes oxygen.
- Do not use the heater in enclosed spaces or residential areas without proper ventilation.
- Maintain a safe distance from combustible materials. Refer to local regulations for minimum clearances.
- Only use approved diesel fuel. Never use gasoline or other volatile fuels.
- Do not refuel the heater while it is running or hot. Allow it to cool down completely.
- Keep children and unauthorized persons away from the operating heater.
- Regularly inspect the power cord and plug for damage. Do not operate with a damaged cord.
- The heater is equipped with overheat protection. Do not bypass or modify safety features.
- Always place the heater on a stable, level, and non-combustible surface.
3. ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບທັງຫມົດແມ່ນມີຢູ່ໃນການຍົກເລີກການຫຸ້ມຫໍ່:
- TROTEC IDE 20 D Diesel Heater unit
- Wheel assembly (wheels, axle, fasteners)
- ຈັດການປະກອບ
- ຄູ່ມືການສອນ
4. ຕັ້ງຄ່າ
4.1 ສະພາ
The heater requires minimal assembly before first use. Attach the wheels and handle to the main unit using the provided hardware. Ensure all connections are secure.
ຮູບພາບ 2: ຂ້າງ view of the heater, illustrating the wheel and handle attachment points for mobility.
4.2 ການເຕີມນໍ້າມັນເຊື້ອໄຟໃສ່ເຄື່ອງເຮັດຄວາມຮ້ອນ
- Ensure the heater is turned off and unplugged.
- Locate the fuel cap on top of the fuel tank.
- Carefully pour clean diesel fuel into the tank. The tank capacity is 19 liters.
- Monitor the fuel level indicator to avoid overfilling.
- ປ່ຽນຝາອັດນ້ຳມັນຢ່າງປອດໄພ.
Image 3: Detail of the fuel cap and integrated fuel level indicator for easy monitoring.
4.3 ການຈັດວາງ
Position the heater in a well-ventilated area, ensuring sufficient clearance from walls, ceilings, and any combustible materials. The heater should be placed on a firm, level surface.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1 ການເລີ່ມຕົ້ນເຄື່ອງເຮັດຄວາມຮ້ອນ
- Ensure the heater is properly fueled and positioned.
- ສຽບສາຍໄຟເຂົ້າໄປໃນບ່ອນສຽບໄຟຟ້າທີ່ເຫມາະສົມ.
- Turn the power switch to the "ON" position. The fan will start, and the ignition sequence will begin.
- The heater will automatically ignite the diesel fuel and begin producing heat.
Image 4: The control panel featuring the power switch and thermostat dial.
5.2 ການປັບອຸນຫະພູມ (ເຄື່ອງຄວບຄຸມອຸນຫະພູມ)
The TROTEC IDE 20 D features an integrated thermostat. Use the thermostat dial on the control panel to set the desired temperature. The heater will cycle on and off automatically to maintain the set temperature.
ຮູບພາບ 5: ດ້ານຫນ້າ view displaying the fan guard and pressure gauge, indicating operational status.
5.3 ການປິດເຄື່ອງເຮັດຄວາມຮ້ອນ
To turn off the heater, switch the power button to the "OFF" position. The fuel supply will be cut off, but the fan will continue to run for approximately 90 seconds to cool down the unit before completely shutting off. This cool-down period is crucial for the longevity of the heater components.
6. ບໍາລຸງຮັກສາ
6.1 ການທໍາຄວາມສະອາດ
Ensure the heater is unplugged and completely cool before performing any cleaning. Wipe the exterior surfaces with a damp cloth. Do not use abrasive cleaners or solvents. Periodically check the air intake and fan for dust or debris accumulation and clean as necessary to maintain optimal airflow.
6.2 ການກັ່ນຕອງນໍ້າມັນ
Regularly inspect and clean or replace the fuel filter to ensure a consistent fuel supply and efficient operation. Refer to the service manual for specific instructions on accessing and maintaining the fuel filter.
6.3 ການເກັບຮັກສາ
When storing the heater for extended periods, ensure the fuel tank is empty or filled with fresh, stabilized diesel fuel. Store the unit in a dry, clean environment, protected from dust and moisture. It is recommended to cover the heater to prevent dust buildup.
Image 6: The heater with its power cord neatly coiled, ready for storage or transport.
7. ການແກ້ໄຂບັນຫາ
ກ່ອນທີ່ຈະຕິດຕໍ່ສະຫນັບສະຫນູນລູກຄ້າ, review ບັນຫາທົ່ວໄປ ແລະວິທີແກ້ໄຂບັນຫາຕໍ່ໄປນີ້:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງເຮັດຄວາມຮ້ອນບໍ່ເລີ່ມຕົ້ນ. | No power supply, empty fuel tank, power switch off. | Check power connection, ensure fuel tank is filled, turn power switch ON. |
| Heater starts but no heat. | Clogged fuel filter, incorrect thermostat setting, low fuel pressure. | Clean/replace fuel filter, adjust thermostat, check fuel lines for blockages. |
| ເຄື່ອງເຮັດຄວາມຮ້ອນຖືກປິດໂດຍບໍ່ຄາດຄິດ. | Overheat protection activated, low fuel level, power interruption. | Allow unit to cool, refill fuel, check power supply. Ensure proper ventilation. |
| ຄວັນ ຫຼື ກິ່ນຫຼາຍເກີນໄປ. | Poor ventilation, incorrect fuel type, dirty burner components. | Increase ventilation, use only diesel fuel, clean burner and nozzle (professional service recommended). |
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ມູນຄ່າ |
|---|---|
| ຍີ່ຫໍ້ | TROTEC |
| ໝາຍເລກຕົວແບບ | 1430000050 |
| ຜົນຜະລິດຄວາມຮ້ອນນາມ | 20 kW |
| ກະແສລົມ | 595 m³/ຊມ |
| ໂໝດທຳຄວາມຮ້ອນ | ໂດຍກົງ |
| ເຄື່ອງຄວບຄຸມອຸນຫະພູມ | ປະສົມປະສານ |
| ການປົກປ້ອງຄວາມຮ້ອນເກີນ | ແມ່ນແລ້ວ |
| ຄວາມອາດສາມາດຂອງຖັງນໍ້າມັນ | 19 ລິດ |
| ຂະໜາດ (L x W x H) | 70 x 42 x 33 cm |
| ນ້ຳໜັກ | 11.5 ກິໂລ |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or spare parts, please contact TROTEC customer service. Details can typically be found on the manufacturer's official website or on your purchase documentation. Always provide the model number (IDE 20 D) and serial number (if applicable) when seeking support.
Note: Availability of spare parts information is not provided in the product data.
