ສິນຄ້າເກີນview
The Fluidmaster PRO747 Adjustable Ballcock is a direct replacement fill valve specifically designed for Kohler 1-piece toilets. It features a high refill port and a water-saving roller clamp to ensure efficient and consistent performance. This product is code-approved and replaces the fill valve in various Kohler toilet models, including K-3466, K-3467, K-3386, K-3524, K-3492, K-3607, and K-3393.
ຮູບພາບ 1: Fluidmaster PRO747 Adjustable Ballcock. This image displays the complete fill valve assembly, including the main body, float, and refill tube connection.
ຂໍ້ມູນຄວາມປອດໄພ
Always turn off the water supply to the toilet before beginning any installation or maintenance. Wear appropriate personal protective equipment, such as gloves and eye protection. If you are unsure about any step, consult a qualified plumber.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
- ປິດການສະຫນອງນ້ໍາ: Locate the water supply valve at the base of the toilet and turn it clockwise until the water flow stops completely. Flush the toilet to empty the tank.
- ເອົາວາວເຕີມນໍ້າເກົ່າອອກ: Disconnect the water supply line from the bottom of the old fill valve. Unscrew the mounting nut from underneath the toilet tank. Carefully remove the old fill valve from the tank.
- ກະກຽມວາວຕື່ມໃໝ່: Ensure the new Fluidmaster PRO747 fill valve has the necessary washer in place at its base.
- ຕິດຕັ້ງວາວເຕີມໃໝ່: Insert the new fill valve into the hole at the bottom of the toilet tank. From underneath the tank, hand-tighten the mounting nut onto the valve shank. Do not overtighten.
- ເຊື່ອມຕໍ່ການສະຫນອງນ້ໍາ: Reconnect the water supply line to the new fill valve. Hand-tighten the connection, then use a wrench to tighten an additional quarter turn. Do not overtighten.
- Attach Refill Tube: Connect the refill tube from the fill valve to the overflow pipe in the toilet tank. Ensure the tube is securely attached and positioned to direct water into the overflow pipe.
- ປັບຄວາມສູງ (ຖ້າມີ): The PRO747 is designed for specific Kohler models. If height adjustment is needed, follow the instructions provided with the physical product for your specific toilet model.
ຄໍາແນະນໍາການດໍາເນີນງານ
After installation, slowly turn the water supply valve counter-clockwise to restore water flow to the toilet. The tank will begin to fill. Observe the water level. The fill valve is designed to shut off automatically when the water reaches the appropriate level, typically about 1 inch below the top of the overflow pipe.
- ການປັບລະດັບນໍ້າ: The PRO747 features a high refill port and water-saving roller clamp. Adjust the roller clamp on the refill tube to control the amount of water directed into the overflow pipe, which affects the bowl refill.
- ລ້າງ: The toilet operates normally after the fill valve is installed and adjusted. Press the flush handle to initiate a flush cycle. The fill valve will then refill the tank and bowl.
ບໍາລຸງຮັກສາ
- ການກວດກາປົກກະຕິ: Periodically inspect the fill valve for any signs of wear, leaks, or mineral buildup.
- ທໍາຄວາມສະອາດ: If the fill valve becomes sluggish or noisy, mineral deposits may be affecting its operation. Turn off the water supply, remove the fill valve, and gently clean any visible mineral buildup with a soft brush and white vinegar solution. Rinse thoroughly before reinstallation.
- ການທົດແທນສ່ວນ: If the fill valve is damaged or no longer functions correctly after cleaning, it may need to be replaced. Use genuine Fluidmaster replacement parts for optimal performance.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຫ້ອງນໍ້າແລ່ນຢ່າງຕໍ່ເນື່ອງ ຫຼືຮອບວຽນເປີດ ແລະປິດ. | Water level too high, fill valve not shutting off completely, or flapper/flush valve leak. | Adjust water level. Inspect fill valve for obstructions. Check flapper for proper seal and replace if necessary. |
| ຫ້ອງນ້ຳຄ່ອຍໆເຕັມ. | Low water pressure, clogged fill valve, or kinked supply line. | Check water supply valve is fully open. Clean fill valve for mineral deposits. Ensure supply line is not kinked. |
| No water entering tank. | Water supply valve closed, clogged fill valve, or faulty fill valve. | Open water supply valve. Clean fill valve. Replace fill valve if necessary. |
| ລະດັບນ້ໍາໃນຖ້ວຍແມ່ນຕໍ່າເກີນໄປ. | Refill tube not properly connected or adjusted. | Ensure refill tube is securely connected to the overflow pipe and adjust the roller clamp for proper bowl refill. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | PRO747 |
| ຍີ່ຫໍ້ | Fluidmaster |
| ຜູ້ຜະລິດ | American Standard (Note: Product description indicates Fluidmaster, but specifications list American Standard as manufacturer. Please verify with product packaging.) |
| ນ້ໍາຫນັກລາຍການ | 10.4 ອອນ |
| ຂະໜາດສິນຄ້າ | 9 x 3.5 x 2.6 ນິ້ວ |
| ຄວາມເຂົ້າກັນໄດ້ | Direct replacement for Kohler 1-piece toilets (K-3466, K-3467, K-3386, K-3524, K-3492, K-3607, K-3393) |
| ອົງປະກອບລວມ | No Other Components Included (Fill valve only) |
| ຕ້ອງໃຊ້ແບັດເຕີຣີ | ບໍ່ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Specific warranty information for the Fluidmaster PRO747 Adjustable Ballcock is not provided in the available product data. Please refer to the product packaging or the official Fluidmaster webເວັບໄຊສໍາລັບເງື່ອນໄຂການຮັບປະກັນລາຍລະອຽດ.
For technical support or further assistance, please contact Fluidmaster customer service directly. Contact information can typically be found on the product packaging or their official webເວັບໄຊ.
