1. ບົດແນະນຳ
This manual provides comprehensive instructions for the safe and effective use of the Freestyle Lite Blood Glucose Monitoring System. Please read this manual thoroughly before using the device for the first time and keep it for future reference. This system is designed for self-testing of blood glucose levels by people with diabetes at home.

Image 1.1: Packaging of the Freestyle Lite Blood Glucose Monitoring System, showing the meter and test strips.
2. ຂໍ້ມູນຄວາມປອດໄພ
Always follow basic safety precautions when using electrical products, especially when children are present. This device is for ໃນ vitro diagnostic use only. Do not use for the diagnosis of diabetes. Consult your healthcare professional for interpretation of results.
- Keep the device and all accessories out of reach of young children.
- Do not use the system if it appears damaged.
- Dispose of used lancets and test strips properly in a sharps container.
- Do not share lancets or lancing devices.
3. ເນື້ອໃນຊຸດ
Verify that all items are present in your Freestyle Lite Blood Glucose Monitoring System package:
- Freestyle Lite Blood Glucose Meter
- Freestyle Lite Test Strips (quantity as per package)
- ອຸປະກອນຕິດຕໍ່
- Lancets (quantity as per package)
- Control Solution (optional, may be sold separately)
- ກະເປົາຖື
- ຄູ່ມືເຈົ້າຂອງ (ເອກະສານສະບັບນີ້)
- ຄູ່ມືອ້າງອີງດ່ວນ
4. ຕັ້ງຄ່າ
4.1. ການຕິດຕັ້ງຫມໍ້ໄຟ
The Freestyle Lite meter uses two 3-volt lithium button cell batteries (CR2032). To install or replace batteries:
- ຊອກຫາຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງເຄື່ອງວັດແທກ.
- Use a small coin to open the battery cover by turning it counter-clockwise.
- Insert the batteries with the positive (+) side facing up.
- Replace the battery cover and turn clockwise to secure.
4.2. ກໍານົດວັນທີແລະເວລາ
It is important to set the correct date and time for accurate record-keeping. Refer to the Quick Reference Guide or the meter's on-screen prompts for detailed instructions on setting these parameters.
4.3. ການກະກຽມອຸປະກອນເຈາະຮູ
- ຖອດຝາອັດປາກຂຸມອຸປະກອນ.
- ສຽບດ້າມໃບໃໝ່ໃສ່ບ່ອນຖືໃບບ່າຢ່າງແໜ້ນໜາ.
- ບິດຝາປິດປ້ອງກັນຂອງຫອກແທງອອກ.
- ປ່ຽນຝາປິດອຸປະກອນເຈາະຮູ.
- Adjust the penetration depth setting on the lancing device (start with a lower setting and adjust as needed).
- Pull back the cocking mechanism until it clicks. The device is now ready to use.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1. ການກວດນ້ຳຕານໃນເລືອດ
ເພື່ອປະຕິບັດການກວດນໍ້າຕານໃນເລືອດ, ໃຫ້ປະຕິບັດຕາມຂັ້ນຕອນຕໍ່ໄປນີ້:
- Wash your hands with soap and warm water, then dry them thoroughly.
- Remove a Freestyle Lite Test Strip from its vial and immediately close the vial cap tightly.
- Insert the test strip into the meter's test strip port. The meter will turn on automatically.
- When the blood drop symbol appears on the display, use the prepared lancing device to prick the side of your fingertip.
- Gently squeeze your finger to form a small drop of blood.
- Touch the tip of the test strip to the blood drop. The blood will be drawn into the strip.
- Hold the strip to the blood drop until the meter beeps and the countdown begins.
- Your blood glucose result will appear on the display in approximately 5 seconds.
- Remove the used test strip from the meter and dispose of it properly.
- Dispose of the used lancet in a sharps container.
5.2. ການຄວບຄຸມການທົດສອບການແກ້ໄຂ
Control solution testing verifies that the meter and test strips are working correctly. Perform a control solution test when:
- ທ່ານເປີດຂວດໃຫມ່ຂອງແຖບທົດສອບ.
- You suspect the meter or test strips are not working correctly.
- You have dropped the meter.
- Your test results do not match how you feel.
Refer to the control solution instructions for specific procedures and acceptable ranges.
6. ບໍາລຸງຮັກສາ
6.1. ການເຮັດຄວາມສະອາດມິເຕີ
Clean the exterior of the meter regularly with a soft, damp ຜ້າ. ຢ່າຈຸ່ມມິເຕີລົງໃນນໍ້າ ຫຼື ໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ຮຸນແຮງ. ໃຫ້ແນ່ໃຈວ່າບໍ່ມີນໍ້າເຂົ້າໄປໃນຊ່ອງແຖບທົດສອບ.
6.2. ການເກັບຮັກສາ
Store the Freestyle Lite meter and test strips in a cool, dry place, away from direct sunlight and extreme temperatures. Keep test strips in their original vial with the cap tightly closed. Do not refrigerate.
7. ການແກ້ໄຂບັນຫາ
If you encounter issues with your Freestyle Lite Blood Glucose Monitoring System, refer to the table below for common problems and solutions.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ແມັດບໍ່ເປີດ. | Dead batteries or incorrect battery insertion. | ປ່ຽນແບັດເຕີລີ, ຮັບປະກັນການຂົ້ວທີ່ຖືກຕ້ອງ. |
| ຂໍ້ຄວາມຜິດພາດສະແດງອອກ. | Improper test strip insertion, insufficient blood sample, or damaged strip. | Refer to the meter's manual for specific error codes. Re-insert strip correctly, apply sufficient blood, or use a new strip. |
| ຜົນໄດ້ຮັບເບິ່ງຄືວ່າບໍ່ຖືກຕ້ອງ. | Expired test strips, improper storage, or control solution needed. | Check strip expiry date. Ensure proper storage. Perform a control solution test. Consult healthcare professional. |
ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.
8. ຂໍ້ມູນຈໍາເພາະ
- ໄລຍະການວັດແທກ: 20-500 mg/dL (1.1-27.8 mmol/L)
- Sampຂະຫນາດ: 0.3 ໄມໂຄລິດ
- ເວລາທົດສອບ: ປະມານ 5 ວິນາທີ
- ໜ່ວຍຄວາມຈຳ: Stores up to 400 results with date and time
- ປະເພດຫມໍ້ໄຟ: Two 3-volt lithium button cell batteries (CR2032)
- ຊີວິດຫມໍ້ໄຟ: ປະມານ 1000 ການທົດສອບ
- ອຸນຫະພູມປະຕິບັດການ: 50°F ຫາ 104°F (10°C ຫາ 40°C)
- ຄວາມຊຸ່ມຊື້ນ: 10% ຫາ 90% (ບໍ່ condensing)
- ຂະໜາດ: (Refer to product packaging for exact dimensions, typically compact)
- ນ້ຳໜັກ: (Refer to product packaging for exact weight, typically light)
ໝາຍ ເຫດ: ຂໍ້ມູນສະເພາະແມ່ນມີການປ່ຽນແປງໂດຍບໍ່ຕ້ອງແຈ້ງ.
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
The Freestyle Lite Blood Glucose Monitoring System typically comes with a limited warranty. Please refer to the warranty card included in your product package for specific terms and conditions, including the warranty period and coverage details. Keep your proof of purchase.
ການຊ່ວຍເຫຼືອລູກຄ້າ:
For technical assistance, product inquiries, or to report any issues, please contact Freestyle customer support:
- Webເວັບໄຊ: www.freestyle.com (ນີ້ແມ່ນຕົວຍຶດສະຖານທີ່, ຕົວຈິງ URL ອາດຈະແຕກຕ່າງກັນ)
- ໂທລະສັບ: 1-800-XXX-XXXX (This is a placeholder, actual number may vary)
Please have your meter's serial number ready when contacting support.





