SEIKO SQ767W Digital Alarm Clock User Manual

1. ບົດແນະນຳ

ຂອບໃຈສໍາລັບການຊື້asing the SEIKO SQ767W Digital Alarm Clock. This compact and versatile clock features a digital display, dual alarms, a calendar, and displays both temperature and humidity. It is designed for convenience on your bedside table or desktop. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance.

ຮູບ 1: ດ້ານຫນ້າ view of the SEIKO SQ767W Digital Alarm Clock.

2. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

• ໂມງປຸກຄູ່: ຕັ້ງເວລາປຸກສອງຄັ້ງທີ່ເປັນອິດສະຫຼະ.
• Radio Wave Correction: Automatically corrects time by receiving standard radio waves (40 kHz/60 kHz automatic selection). Includes a radio wave off function.
• ຈໍດິຈິຕອນ: Clear display of time, date, temperature, and humidity.
• ຟັງຊັນ Snooze: Temporarily pauses the alarm.
• ຟັງຊັນແສງ: ສ່ອງໜ້າຈໍເພື່ອໃຫ້ເຫັນພາບໄດ້ຊັດເຈນໃນສະພາບແສງໜ້ອຍ.
• Alarm Monitor: Allows checking the alarm sound.
• Alarm Auto Stop: Alarm automatically stops after 5 minutes.
• ປະຕິທິນອັດຕະໂນມັດເຕັມຮູບແບບ: Displays the correct date automatically.
• ສະແດງອຸນຫະພູມ/ຄວາມຊຸ່ມຊື່ນ: Provides current room temperature and humidity readings.

3. ຕັ້ງຄ່າ

3.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

1. ເປີດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟທີ່ຕັ້ງຢູ່ດ້ານຫຼັງຂອງໂມງ.
2. Insert two (2) AA manganese batteries, ensuring correct polarity (+/-).
3. ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.

The clock requires 2 AA batteries, which are included with the product.

3.2 Initial Power On and Radio Wave Reception

Upon battery installation, the clock will attempt to receive radio waves to set the time automatically. For best reception:

• ວາງໂມງໄວ້ໃກ້ປ່ອງຢ້ຽມ.
• Avoid locations with potential radio interference, such as:
  • Inside buildings, basements, or areas with thick walls.
  • ໃກ້ກັບ high-voltage lines, TV towers, or train rails.
  • Close to electronic appliances (TVs, refrigerators, air conditioners, computers, etc.).
  • In vehicles (automotive, train, airplane).
  • Near metal furniture like steel desks.

If radio waves are not received, the clock will operate with quartz accuracy. Reception may vary depending on environmental conditions.

Figure 2: Radio wave coverage map for time synchronization.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

The control buttons are located on the back of the clock. Refer to Figure 3 for button identification.

ຮູບ 3: ກັບຄືນໄປບ່ອນ view with control buttons.

4.1 ການກຳນົດເວລາ ແລະ ວັນທີ

• Automatic Setting (Radio Wave): The clock attempts to set the time and date automatically via radio wave reception. Ensure the clock is placed in an optimal reception area.
• ການ​ຕັ້ງ​ຄ່າ​ຄູ່​ມື​: If radio wave reception is not possible or desired, you can manually set the time and date using the '時刻/日付合わせ' (Time/Date Adjustment) button and other relevant controls on the back. Consult the detailed instructions for specific button sequences.

4.2 ການຕັ້ງຄ່າໂມງປຸກ (ປຸກ 1 ແລະປຸກ 2)

ໂມງມີສອງໂມງປຸກເອກະລາດ.

1. Use the 'アラーム時刻合わせ' (Alarm Time Adjustment) button to select Alarm 1 or Alarm 2.
2. Adjust the desired alarm time using the appropriate adjustment buttons.
3. Toggle the 'アラーム1 ON/OFF' or 'アラーム2 ON/OFF' switch to activate or deactivate each alarm.

4.3 Snooze and Light Function

Press the large button on top of the clock to activate the snooze function when an alarm sounds. This button also illuminates the display temporarily when pressed outside of an alarm event.

4.4 ການສະແດງອຸນຫະພູມ ແລະ ຄວາມຊຸ່ມຊື່ນ

The clock continuously displays the current room temperature and humidity on its screen. No special action is required to view these readings.

Figure 4: Close-up of the digital display.

5. ບໍາລຸງຮັກສາ

5.1 ການທໍາຄວາມສະອາດ

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing ຫຼືສະແດງ.

5.2 ການທົດແທນຫມໍ້ໄຟ

Replace batteries when the display dims or the clock's functions become unreliable. Always replace both batteries at the same time with new AA manganese batteries. Dispose of used batteries according to local regulations.

6. ການແກ້ໄຂບັນຫາ

• Clock not displaying time/functions: ກວດເບິ່ງການຕິດຕັ້ງແບດເຕີລີ່ແລະໃຫ້ແນ່ໃຈວ່າແບດເຕີຣີບໍ່ຫມົດໄປ.
• ເວລາບໍ່ຖືກຕ້ອງ: Ensure the clock is in an optimal location for radio wave reception. If automatic correction fails, manually set the time.
• ໂມງປຸກບໍ່ດັງ: Verify that the alarm is set to 'ON' and the alarm time is correctly configured.
• ຈໍສະແດງຜົນແມ່ນມືດມົວ: ປ່ຽນແບັດເຕີລີ.
• Radio wave reception issues: Relocate the clock away from electronic devices, metal objects, or large structures that may interfere with signals.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the documentation included with your purchase or contact SEIKO customer service. Keep your purchase receipt as proof of purchase.