ຄູ່ມື+

ALDES 11014085

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit

Model: 11014085 | Brand: ALDES

1. ບົດແນະນຳ

This manual provides comprehensive instructions for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, model 11014085. This kit is designed to regulate airflow and reduce noise, ensuring optimal indoor air quality. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, white

Figure 1: Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit. This image shows the compact, rectangular design of the white air inlet unit.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of injury or damage.

3. ເນື້ອໃນຊຸດ

ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ ແລະບໍ່ມີຄວາມເສຍຫາຍກ່ອນທີ່ຈະດໍາເນີນການຕິດຕັ້ງ.

4. ການຕິດຕັ້ງ & ການຕິດຕັ້ງ

This section outlines the general steps for installing the Aldes EHL air inlet. Specific installation details may vary based on the type of wall or window and local building codes. Consult a professional if unsure.

  1. ເລືອກສະຖານທີ່: Select an appropriate location for the air inlet, typically on an exterior wall or window frame, ensuring it is not obstructed.
  2. ກະກຽມເປີດ: Create an opening in the wall or window frame according to the dimensions specified in the product's technical data sheet (not provided in this manual, refer to manufacturer's webເວັບໄຊ).
  3. Install Outer Grille (if applicable): Secure the exterior grille to the outside of the opening.
  4. Insert Air Inlet Unit: Carefully insert the Aldes EHL air inlet unit into the prepared opening from the interior side.
  5. ໜ່ວຍຄວາມໝັ້ນຄົງ: Use the provided mounting screws to firmly secure the air inlet unit to the wall or window frame. Ensure it is level and sealed properly to prevent air leaks.
  6. Apply Seals: Apply any necessary seals or gaskets to ensure airtightness and acoustic performance.
  7. ການ​ທໍາ​ງານ​ຂອງ​ການ​ທົດ​ສອບ​: After installation, verify that the air inlet's hygro-adjustable mechanism moves freely and that airflow is established.

Note: For detailed diagrams and specific mounting instructions, please refer to the technical documentation provided by ALDES or consult their official webເວັບໄຊ.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The Aldes EHL air inlet is a hygro-adjustable device, meaning its airflow capacity automatically adapts based on the humidity level in the room. This ensures optimal ventilation without manual intervention.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures the efficient and long-lasting operation of your Aldes EHL air inlet.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Aldes EHL air inlet, refer to the following common problems and solutions.

ບັນຫາ ສາເຫດທີ່ເປັນໄປໄດ້ ການແກ້ໄຂ
ກະແສລົມບໍ່ພຽງພໍ
  • Air inlet or outer grille is obstructed.
  • Dust accumulation on internal components.
  • Humidity sensor is blocked or faulty.
  • Incorrect installation or sealing.
  • ກວດເບິ່ງແລະເອົາສິ່ງກີດຂວາງອອກ.
  • Clean the air inlet as described in the Maintenance section.
  • Ensure the humidity sensor is clear. If still faulty, contact support.
  • Verify proper installation and sealing.
ສິ່ງລົບກວນຫຼາຍເກີນໄປ
  • Loose components or improper sealing.
  • External noise sources.
  • Air inlet operating at maximum flow due to high humidity.
  • Check mounting screws and seals.
  • Identify and address external noise sources.
  • This is normal operation. Ensure the unit is clean.
Unit Not Adjusting
  • Humidity sensor is dirty or damaged.
  • Mechanical obstruction of the adjustment mechanism.
  • Clean the humidity sensor. If still unresponsive, the sensor may be faulty.
  • ກວດກາເບິ່ງສິ່ງກີດຂວາງທາງຮ່າງກາຍເພື່ອປ້ອງກັນການເຄື່ອນໄຫວ.

If the problem persists after attempting these solutions, please contact Aldes customer support or a qualified technician.

8. ຂໍ້ມູນຈໍາເພາະ

Key technical specifications for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit.

9. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

For warranty information, technical support, or to inquire about spare parts, please contact ALDES directly.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - 11014085

ກ່ອນview Aldes EHL L 6-44 m³/h - 39 dB - ສີຂາວ: ຊຸດທໍ່ລະບາຍອາກາດສຽງ ແລະ ຄວາມຊຸ່ມຊື່ນ
Detailed information on the Aldes EHL L hygrometric air inlet kit, including its technical specifications, acoustic performance, dimensions, and installation guidelines. This kit provides adjustable airflow for residential buildings, ensuring optimal air quality and acoustic comfort.
ກ່ອນview Aldes EHL S 6-44 m³/h - 37 dB - White: Hygro-Regulated Air Inlet
Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow, and ceiling-directed air flow. Includes technical specifications, dimensions, and installation guidelines.
ກ່ອນview Aldes EHL S 6-44 m³/h - 37 dB Aluminium Air Inlet - Technical Specifications
Detailed technical specifications for the Aldes EHL S 6-44 m³/h - 37 dB Aluminium hygro-regulated air inlet, including features, dimensions, acoustic data, and installation guidelines.
ກ່ອນview Aldes EHL L 6-44 m³/h - 39 dB Anthracite Hygro-Regulated Air Inlet
ຂໍ້ມູນສະເພາະທາງດ້ານວິຊາການ ແລະຄູ່ມືການຕິດຕັ້ງສໍາລັບລະບົບທໍ່ລະບາຍອາກາດ Aldes EHL L hygro-regulated, ແບບ 11014138, in anthracite. ຄຸນສົມບັດການຫຼຸດສຽງສຽງສູງເຖິງ 42 dB ແລະສາມາດປັບກະແສລົມໄດ້ຈາກ 6-44 m³/h.
ກ່ອນview Aldes EHL S 6-44 m³/h - 37 dB - Brown Hygro-regulated Air Inlet
Technical specifications and installation guide for the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a discreet design. Includes dimensions, accessories, and acoustic data.
ກ່ອນview Aldes EHL S 6-44 m³/h - 37 dB - Anthracite: Hygro-regulated Air Inlet
Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a sleek design. Includes technical specifications, dimensions, and available accessories.