Greenworks 40V 24-Inch Cordless Hedge Trimmer (Model 22262)

1. ບົດແນະນຳ

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Greenworks 40V 24-inch Cordless Hedge Trimmer, Model 22262. Please read all instructions carefully before use and retain this manual for future reference.

2. ຂໍ້ມູນຄວາມປອດໄພ

ສະເຫມີຈັດລໍາດັບຄວາມສໍາຄັນຄວາມປອດໄພໃນເວລາທີ່ປະຕິບັດການເຄື່ອງມືພະລັງງານ. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ເກີດການບາດເຈັບທີ່ຮ້າຍແຮງຫຼືຄວາມເສຍຫາຍຕໍ່ຊັບສິນ.

• ອ່ານຄູ່ມືທັງໝົດ: Understand all warnings and operating procedures.
• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນ (PPE): Always wear safety glasses or goggles, hearing protection, gloves, and sturdy footwear. Long pants and sleeves are also recommended.
• ຮັກສາພື້ນທີ່ເຮັດວຽກໃຫ້ຊັດເຈນ: Ensure no bystanders, children, or pets are in the work area. Remove any debris or obstacles that could interfere with operation.
• ກວດ​ສອບ​ກ່ອນ​ການ​ນໍາ​ໃຊ້​: Before each use, check the hedge trimmer for any damaged parts, loose fasteners, or dull blades. Ensure the blade guard is securely in place.
• ການ​ຈັບ​ທີ່​ເຫມາະ​ສົມ​: Always hold the hedge trimmer firmly with both hands during operation.
• ຄວາມປອດໄພຫມໍ້ໄຟ: Use only Greenworks G-MAX 40V Li-Ion Battery Models 29462, 29472, and Charger 29482. Remove the battery when not in use, before cleaning, or when performing maintenance.
• ຫຼີກເວັ້ນການອັນຕະລາຍໄຟຟ້າ: Do not operate near electrical wires or cables.
• ຕີນທີ່ໝັ້ນຄົງ: ຮັກສາຄວາມດຸ່ນດ່ຽງແລະຕີນທີ່ຖືກຕ້ອງຕະຫຼອດເວລາ. ບໍ່ເກີນ.

3. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

• ແຫຼ່ງພະລັງງານ: 40V Lithium-Ion Battery System (battery and charger included).
• ຄວາມຍາວຂອງແຜ່ນໃບ: 24-inch dual-action steel blade for efficient cutting and reduced vibration.
• ຄວາມສາມາດໃນການຕັດ: 3/4-inch cutting capacity, suitable for various bushes and hedges.
• ໝຸນຈັບຫຼັງ: Innovative 180-degree rotating rear handle allows for easy trimming at multiple angles, enhancing user comfort and control.
• ການອອກແບບນ້ຳໜັກເບົາ: Weighs approximately 8.26 pounds for reduced fatigue during extended use.
• ວັດສະດຸ: ການກໍ່ສ້າງເຫຼັກໂລຫະປະສົມທົນທານ.

4. ຕັ້ງຄ່າ

4.1. ການຕິດຕັ້ງຫມໍ້ໄຟ

1. ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ປິດເຄື່ອງຕັດຮົ້ວໄວ້ ແລະ ບໍ່ຕິດພັນ.
2. ຈັດວາງຊຸດແບັດເຕີຣີກັບພອດແບັດເຕີຣີໃນເຄື່ອງມື.
3. ເລື່ອນແບດເຕີລີ່ເຂົ້າໄປໃນເຄື່ອງມືຈົນກ່ວາມັນກົດໃສ່ຢ່າງປອດໄພ.
4. ເພື່ອເອົາອອກ, ກົດປຸ່ມປ່ອຍແບດເຕີລີ່ແລະເລື່ອນຫມໍ້ໄຟອອກ.

4.2. ກອງ Blade

The hedge trimmer comes with a blade guard for safe storage and transport. Ensure the blade guard is removed before operation and re-installed immediately after use. The guard should fit snugly over the blade.

Figure 1: Greenworks 40V 24-inch Cordless Hedge Trimmer with the blade guard in place.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1. ການເລີ່ມຕົ້ນເຄື່ອງຕັດຫຍ້າ

1. ໃຫ້ແນ່ໃຈວ່າໄດ້ສາກໄຟເຕັມ ແລະຕິດຕັ້ງຢ່າງຖືກຕ້ອງ.
2. ຖືເຄື່ອງຕັດຮົ້ວກັນຢ່າງແໜ້ນໜາດ້ວຍມືທັງສອງ.
3. Press and hold the safety lock-off button (usually located near the main handle).
4. Squeeze the trigger switch to start the blades. Release the safety lock-off button once the blades are running.

Figure 2: Close-up of the main handle and safety lock-off button.

5.2. Using the Rotating Rear Handle

The 180-degree rotating rear handle allows for comfortable operation when trimming at different angles (e.g., vertical sides of hedges). To adjust the handle:

1. Ensure the trimmer is off and the blades have stopped moving.
2. Locate the handle rotation button (typically a white button near the rear handle).
3. ກົດປຸ່ມຄ້າງໄວ້.
4. Rotate the rear handle to the desired position (0, 90, or 180 degrees).
5. Release the button to lock the handle in place. Ensure it is securely locked before resuming operation.

Figure 3: The rotating rear handle allows for versatile trimming positions.

5.3. ເຕັກນິກການຕັດ

• Side Trimming: Hold the trimmer with the blade parallel to the hedge side. Move the trimmer in a sweeping motion, cutting from bottom to top.
• Top Trimming: Hold the trimmer with the blade flat over the top of the hedge. Move steadily across the top, ensuring an even cut.
• ຫຼີກເວັ້ນການໂຫຼດເກີນ: Do not force the trimmer through thick branches. If the blades bog down, reduce the cutting speed or use a different tool for larger branches.

Figure 4: Proper technique for trimming hedges.

6. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດແລະຍືດອາຍຸຂອງ trimmer hedge ຂອງທ່ານ.

• ແຜ່ນໃບຄ້າຍຄືສະອາດ: After each use, remove the battery and clean the blades with a stiff brush to remove sap and debris. Apply a light coat of machine oil to prevent rust.
• ກວດ​ສອບ​ແຜ່ນ​ໃບ​ຄ້າຍ​ຄື​: Periodically check the blades for sharpness and damage. Dull or damaged blades should be sharpened or replaced by a qualified service technician.
• ກວດເບິ່ງ fasteners: ໃຫ້ແນ່ໃຈວ່າແກ່ນ, bolts, ແລະ screws ທັງຫມົດແມ່ນແຫນ້ນ.
• ເກັບຮັກສາຢ່າງຖືກຕ້ອງ: Store the hedge trimmer in a dry, secure location, out of reach of children. Always use the blade guard when storing.
• ການດູແລຫມໍ້ໄຟ: ເກັບຮັກສາຫມໍ້ໄຟໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ. ຢ່າເກັບແບັດເຕີລີຢູ່ໃນສະພາບທີ່ປ່ອຍປະໄວ້ເປັນເວລາດົນ.

Figure 5: Clean and lubricate blades after each use.

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

• ຍີ່ຫໍ້: Greenworks
• ໝາຍເລກຕົວແບບ: 22262
• ແຫຼ່ງພະລັງງານ: ພະລັງງານຫມໍ້ໄຟ
• ສະບັບtage: 40 ໂວນ
• ຄວາມຍາວຂອງແຜ່ນໃບ: 24 ນິ້ວ
• ຄວາມກວ້າງການຕັດ: 24 ນິ້ວ
• ຄວາມສາມາດໃນການຕັດ: 3/4 ນິ້ວ
• ນ້ໍາຫນັກລາຍການ: 8.26 ປອນ
• ຂະໜາດຜະລິດຕະພັນ: 39.5"L x 7.5"W x 9.5"H
• ວັດສະດຸ: ເຫຼັກໂລຫະປະສົມ
• ສີ: Black and green
• UPC: 841821009304

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, product registration, or technical support, please refer to the official Greenworks webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.

Greenworks Webເວັບໄຊ: www.greenworkstools.com