Molex 50-57-9402 Housing Receptacle Connector User Manual

1. ບົດແນະນຳ

This manual provides essential information for the proper installation, usage, and maintenance of the Molex 50-57-9402 Housing Receptacle Connector. Please read this manual thoroughly before attempting to use the product to ensure safe and effective operation.

2. ຂໍ້ມູນຄວາມປອດໄພ

ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ສະເໝີ:

• Ensure power is disconnected from any circuit before installing or removing connectors.
• Handle small components with care to prevent damage or loss.
• Do not force connections; ensure proper alignment before insertion.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.

3. ຜະລິດຕະພັນເກີນview

The Molex 50-57-9402 is a 2-position housing receptacle connector designed for various electrical applications. It features a 2.54 mm pitch and is constructed from durable plastic with a black finish. This connector is typically used in free-hanging configurations.

Figure 3.1: Molex 50-57-9402 Housing Receptacle Connector. This image displays the black plastic housing with its two internal pin receptacles visible at one end, and the locking mechanism on the top surface.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• ສີທີ່ຢູ່ອາໄສ: ສີດໍາ
• ຈໍານວນຕໍາແໜ່ງ: 2
• ພວງມະໄລ: 2.54 ມມ
• Dimensions: 5.05 mm (L) x 6.58 mm (H) x 15.24 mm (D)
• Mounting Type: Free hanging

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The Molex 50-57-9402 connector is designed for straightforward assembly. Please note that this housing typically requires separate crimp terminals (pins) to be inserted into the housing for a complete connection. These pins are generally not included with the housing and must be acquired separately.

ຂັ້ນ​ຕອນ​ການ​ຕິດ​ຕັ້ງ​:

1. ກະກຽມສາຍໄຟ: Strip the insulation from the ends of the wires that will be connected to the terminals.
2. Crimp Terminals: Crimp the appropriate Molex terminals (pins) onto the stripped wire ends using a suitable crimping tool. Ensure a secure and proper crimp for reliable electrical contact.
3. Insert Terminals into Housing: Carefully insert the crimped terminals into the designated cavities of the 50-57-9402 housing. Ensure the terminals are oriented correctly and click into place, indicating they are fully seated and locked.
4. ເຊື່ອມຕໍ່: Once both terminals are securely in the housing, the receptacle connector is ready to be mated with a compatible male header or plug connector. Align the connectors and push them together until they fully engage.

Note: Refer to the specific datasheet for the terminals you are using for detailed crimping instructions.

5. ການນຳໃຊ້

Once installed and connected, the Molex 50-57-9402 connector provides a reliable electrical connection for two circuits. Its design ensures a secure fit, preventing accidental disconnections under normal operating conditions. This connector is suitable for low-power signal and power applications within its specified voltage ແລະການຈັດອັນດັບໃນປະຈຸບັນ.

6. ບໍາລຸງຮັກສາ

The Molex 50-57-9402 connector is designed for long-term reliability and requires minimal maintenance.

• ທໍາຄວາມສະອາດ: If necessary, gently clean the exterior of the connector with a dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
• ການກວດກາ: Periodically inspect connections for any signs of wear, corrosion, or damage. Ensure the connector remains securely mated.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Molex 50-57-9402 connector, consider the following:

• ບໍ່ມີການເຊື່ອມຕໍ່ໄຟຟ້າ:
  • Verify that the correct terminals (pins) have been crimped onto the wires and are fully inserted into the housing. This housing does not come with pins, which are essential for electrical contact.
  • Ensure the connector is fully mated with its counterpart.
  • Check for any bent or damaged terminals within the housing or on the mating connector.
• ການເຊື່ອມຕໍ່ວ່າງ:
  • Confirm that the terminals are properly locked into the housing. A slight tug on the wire should not pull the terminal out.
  • Ensure the mating connectors are fully engaged and the locking mechanism (if present on the mating part) is secure.
• Difficulty Mating:
  • Check for proper alignment of the connector with its mating part.
  • Inspect for any debris or foreign objects obstructing the connection.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For specific warranty information regarding the Molex 50-57-9402 Housing Receptacle Connector, please refer to the official Molex website or contact Molex customer support directly. General return policies may apply as per the retailer's terms of sale.

ສຳລັບການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ ຫຼື ສອບຖາມເພີ່ມເຕີມ, ກະລຸນາເຂົ້າໄປທີ່ Molex official webເວັບໄຊ or consult their product documentation.