Linear 212LS-C26DCR-RT

Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset User Manual

Model: 212LS-C26DCR-RT

1. ບົດແນະນຳ

This manual provides instructions for the installation, operation, and maintenance of the Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset. This lockset is designed for secure access control in both commercial and residential environments.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

  • ການກໍ່ສ້າງທົນທານຕໍ່ອາຍຸຍືນ.
  • Clutch lever design for enhanced security.
  • Long battery life (up to 15,000 keypad activations) with low-battery alert.
  • Password retention during battery removal.
  • Easy installation into standard cylindrical door preps (ANSI 151.8).
  • Master password control system for managing up to 120 user passwords.
  • Mechanical key override for emergency situations.

2. ຂໍ້ມູນຄວາມປອດໄພ

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the product, property, or personal injury.

  • Ensure proper battery polarity when installing batteries.
  • Do not expose the lockset to extreme temperatures or moisture beyond its intended operating conditions.
  • Keep mechanical keys in a secure location, separate from the lockset.
  • Do not attempt to disassemble or repair the lockset yourself. Refer to qualified personnel for service.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ມີ​ລາຍ​ການ​ທັງ​ຫມົດ​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

  • Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset
  • ຮາດແວຕິດຕັ້ງ
  • ກະແຈກົນຈັກ 2 ອັນ
  • ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

Note: Four AA 1.5 volt batteries are required and are not included in the package.

4. ການຕິດຕັ້ງ

The lockset is designed for easy installation into a standard cylindrical door preparation (ANSI 151.8).

4.1. ກະກຽມປະຕູ

Ensure your door has a standard cylindrical door prep. If not, consult a professional for proper door preparation.

4.2. Install the Lockset

  1. Follow the detailed instructions provided with the mounting hardware to secure the lockset components to the door.
  2. Ensure all cables are properly connected and routed to avoid pinching.

4.3. ຕິດຕັ້ງແບັດເຕີລີ

  1. Locate the battery compartment, typically on the interior side of the lockset.
  2. Insert four (4) AA 1.5 volt batteries, ensuring correct polarity.
  3. ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.

Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset, Right Hand OpeningFigure 1: Linear 212LS-C26DCR-RT Lockset showing keypad and lever handle.

5. ການດໍາເນີນງານ

The lockset operates using a keypad for electronic access or mechanical keys for override.

5.1. Initial Setup and Master Password

Upon initial power-up, you will need to set a master password. Refer to the specific programming instructions included with your lockset for this procedure. The master password allows for the management of up to 120 individual user passwords.

5.2. Adding User Passwords

Using the master password, you can add or delete up to 120 unique user passwords. Each user password grants access through the keypad.

5.3. ການປ້ອນຂໍ້ມູນດ້ວຍແປ້ນພິມ

  1. Enter a valid user password on the keypad.
  2. The lock will disengage, allowing the handle to operate.
  3. If an incorrect code is entered, the handle will not mechanically engage the cylinder, preventing unauthorized entry.

5.4. Mechanical Key Override

In emergency situations or if batteries are depleted, the provided mechanical keys can be used to unlock the door. Insert the key into the keyway and turn to unlock.

6. ບໍາລຸງຮັກສາ

6.1. ການທົດແທນຫມໍ້ໄຟ

The lockset is designed for approximately 15,000 keypad activations, which translates to about 5 years of usage based on 10 activations per day. A low-battery alert will indicate when batteries need replacement. Replace all four AA batteries simultaneously with new, high-quality alkaline batteries.

6.2. ທໍາຄວາມສະອາດ

Clean the lockset exterior with a soft, damp ຜ້າ. ຫຼີກລ່ຽງນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍທີ່ອາດຈະທໍາລາຍຊັ້ນເຄືອບ ຫຼື ອົງປະກອບເອເລັກໂຕຣນິກ.

7. ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
Handle does not engage after entering correct code.Low batteries or mechanical issue.Replace batteries. If problem persists, use mechanical key and contact support.
ປຸ່ມກົດບໍ່ຕອບສະໜອງ.Dead batteries or internal electronic fault.Replace batteries. If still unresponsive, use mechanical key and contact support.
Cannot add or delete user passwords.Incorrect master password or programming error.Verify master password. Refer to programming instructions for correct procedure.

8. ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດລາຍລະອຽດ
ໝາຍເລກຕົວແບບ212LS-C26DCR-RT
ຂະໜາດ (L x W x H)10.1 x 8.5 x 7.4 ນິ້ວ
ນ້ຳໜັກ5.5 ປອນ
ແຫຼ່ງພະລັງງານ4 AA 1.5V batteries (not included)
ຊີວິດຫມໍ້ໄຟApprox. 15,000 activations
ປະເພດລັອກປຸ່ມກົດ
ຄຸນນະສົມບັດພິເສດທົນທານຕໍ່ນ້ໍາ
ວັດສະດຸໂລຫະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This product typically comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Linear customer service. Contact information can usually be found on the manufacturer's webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.

Note: The warranty period for this product is generally 24 months, primarily for wholesale purchasers. Please confirm your specific warranty coverage.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - 212LS-C26DCR-RT

ກ່ອນview ຄູ່ມືການຕິດຕັ້ງ ແລະ ການຂຽນໂປຣແກຣມລະບົບເຂົ້າລະບົບດິຈິຕອລແບບບໍ່ຕ້ອງໃຊ້ກະແຈ Linear AK-11
ລະບົບ Linear AK-11 ເປັນລະບົບເຂົ້າປະຕູດິຈິຕອນທີ່ທົນທານ ແລະ ບໍ່ຕ້ອງໃຊ້ກະແຈ ເຊິ່ງຖືກອອກແບບມາສຳລັບການນຳໃຊ້ໃນການຄວບຄຸມການເຂົ້າເຖິງ. ມັນມີຕູ້ອາລູມີນຽມທີ່ທົນທານ, ຮອງຮັບລະຫັດເຂົ້າທີ່ສາມາດຕັ້ງໂປຣແກຣມໄດ້ເຖິງ 480 ລະຫັດ (1-6 ຕົວເລກ), ແລະ ມີຕົວເລືອກຜົນຜະລິດຫຼາຍຢ່າງ ລວມທັງສອງ relay ແລະ ສອງ output ແບບ solid-state. ລະບົບນີ້ເໝາະສຳລັບການຄວບຄຸມການເຂົ້າເຖິງປະຕູ ແລະ ປະຕູຮົ້ວ, ໂດຍມີຄຸນສົມບັດຕ່າງໆເຊັ່ນ: ຕ້ານການກົດກັບຄືນ, ການລັອກແປ້ນພິມ, ແລະ ໜ້າທີ່ການປ້ອນຂໍ້ມູນຕ່າງໆ ເພື່ອຄວາມປອດໄພ ແລະ ຄວາມສະດວກສະບາຍທີ່ດີຂຶ້ນ.
ກ່ອນview ຄຳແນະນຳໃນການຕິດຕັ້ງ ແລະ ການຂຽນໂປຣແກຣມລະບົບເຂົ້າລະບົບດິຈິຕອນແບບບໍ່ຕ້ອງໃຊ້ກະແຈ Linear AK-11
ຄູ່ມືທີ່ຄົບຖ້ວນສົມບູນສຳລັບການຕິດຕັ້ງ ແລະ ການຂຽນໂປຣແກຣມລະບົບເຂົ້າລົດແບບບໍ່ຕ້ອງໃຊ້ກະແຈ Linear AK-11 Digital Keyless Entry System, ເຊິ່ງກວມເອົາຄຸນສົມບັດ, ສະເປັກ, ສາຍໄຟ, ການຕັ້ງຄ່າ, ການດຳເນີນງານ ແລະ ການແກ້ໄຂບັນຫາ.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງ Linear Entry Pro Series: ການຕັ້ງຄ່າຮາດແວ ແລະ ລະບົບ
ຄູ່ມືນີ້ໃຫ້ຄຳແນະນຳກ່ຽວກັບການຕິດຕັ້ງ, ການເຊື່ອມຕໍ່ສາຍໄຟ ແລະ ການຕັ້ງຄ່າທີ່ຄົບຖ້ວນສຳລັບລະບົບຄວບຄຸມການເຂົ້າ-ອອກໂທລະສັບ Linear Entry Pro Series (EP-4xx, EP-7xx). ມັນລະບຸລາຍລະອຽດກ່ຽວກັບຄຸນສົມບັດຮາດແວ, ສະຖານທີ່ປະກອບ, ການວິນິດໄສລະບົບ, ການແກ້ໄຂບັນຫາ ແລະ ລາຍລະອຽດສະເພາະສຳລັບການຄຸ້ມຄອງການເຂົ້າເຖິງທີ່ປອດໄພ.
ກ່ອນview Linear AccessKey AK-1 Digital Keypad Entry System - ຂໍ້ມູນຈໍາເພາະ ແລະຄຸນສົມບັດ
ຂໍ້​ມູນ​ລະ​ອຽດ​ກ່ຽວ​ກັບ Linear AccessKey AK-1​, ລະ​ບົບ​ການ​ເຂົ້າ​ປຸ່ມ​ດິ​ຈິ​ຕອນ​ສໍາ​ລັບ​ການ​ຄວບ​ຄຸມ​ການ​ເຂົ້າ​ເຖິງ​ທາງ​ການ​ຄ້າ​, ມີ​ການ​ອອກ​ແບບ rugged​, ຜົນ​ໄດ້​ຮັບ​ຫຼາຍ​, ແລະ​ລະ​ຫັດ PIN ທີ່​ຕັ້ງ​ໂຄງ​ການ​.
ກ່ອນview Linear Wireless Entry Systems: Keypads ແລະ Controllers
ສຳຫຼວດລະບົບເຂົ້າໄຮ້ສາຍຂອງ Linear, ລວມທັງປຸ່ມກົດ MDKP, ຕົວຄວບຄຸມ AP-5, ແລະປຸ່ມກົດ AK-series ຕ່າງໆເພື່ອຄວບຄຸມການເຂົ້າເຖິງຢ່າງປອດໄພໃນການນຳໃຊ້ທີ່ຢູ່ອາໄສ, ການຄ້າ ແລະອຸດສາຫະກຳ.
ກ່ອນview ລະບົບຄວບຄຸມການເຂົ້າເຖິງແບບໄຮ້ສາຍ Linear AM/II: ຄູ່ມືການຕິດຕັ້ງ ແລະ ການຂຽນໂປຣແກຣມ
ຄຳແນະນຳການຕິດຕັ້ງ ແລະ ການຂຽນໂປຣແກຣມທີ່ຄົບຖ້ວນສຳລັບລະບົບຄວບຄຸມການເຂົ້າເຖິງແບບໄຮ້ສາຍ Linear AM/II, ເຊິ່ງກວມເອົາຄຸນສົມບັດຕ່າງໆ, ການຕັ້ງຄ່າ ແລະ ການດຳເນີນງານ. ຮຽນຮູ້ກ່ຽວກັບຄວາມສາມາດແບບໄຮ້ສາຍ, ອິນເຕີເຟດ Wiegand/RS-232, ແລະ ຕົວເລືອກເຄືອຂ່າຍ.