ແນະນຳ
The Dish Network 20.1 IR Remote Control is designed to operate your Dish Network receiver and a television. This remote functions in Infrared (IR) mode, requiring a direct line of sight between the remote and the device being controlled. It is an upgraded version of the 20.0 remote, featuring expanded codes for compatibility with a wider range of newer televisions.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- Operates Dish Network receivers in IR mode.
- Compatible with various television models.
- Capable of learning codes from other IR remotes.
- Requires four AAA batteries for operation.
ຕັ້ງຄ່າ
1. ການຕິດຕັ້ງຫມໍ້ໄຟ
The Dish Network 20.1 remote control requires four (4) AAA batteries.
- ຊອກຫາຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງຣີໂໝດຄວບຄຸມ.
- ເລື່ອນຝາປິດລົງ ແລະ ຍົກມັນອອກ.
- Insert four AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- ປ່ຽນຝາປິດຊ່ອງໃສ່ແບັດເຕີລີໂດຍການເລື່ອນມັນກັບຄືນໃສ່ບ່ອນເກົ່າຈົນກວ່າມັນຈະກົດຢ່າງປອດໄພ.
ຮູບພາບ: ທາງຫນ້າ view of the Dish Network 20.1 IR Remote Control, showing button layout.
2. Pairing with Dish Network Receiver (IR Mode)
The 20.1 remote is designed to control Dish Network receivers in IR mode. For newer receivers like the Hopper and Joey, which may have originally shipped with a UHF remote, you might need to configure the receiver to accept IR commands. Consult your receiver's manual for specific instructions on enabling IR mode.
Typically, the remote will control the Dish receiver automatically once batteries are installed and the receiver is set to IR mode.
3. Programming for Television Control
To control your television's power, volume, and input functions, you will need to program the remote with your TV's code.
- ເປີດໂທລະພາບຂອງທ່ານ.
- ກົດຄ້າງໄວ້ TV mode button on the remote until all four mode buttons (SAT, TV, DVD, AUX) illuminate.
- ປ່ອຍຕົວ TV ປຸ່ມ. ໄດ້ TV ປຸ່ມຄວນຈະຍັງສະຫວ່າງ.
- Enter the 3-digit TV code for your television brand. Refer to the code list provided with your remote or search online for "Dish Network 20.1 TV codes" for your specific TV brand.
- After entering the code, the TV button should flash three times and then turn off, indicating successful programming. If it does not flash, repeat the process.
- ທົດສອບໄລຍະໄກໂດຍການກົດປຸ່ມ ພະລັງງານ button to turn off your TV. If it works, the programming is complete. If not, try the next code for your TV brand.
Image: Dish Network 20.1 Remote Control shown alongside a sheet of programming codes and room labels.
ຄໍາແນະນໍາການດໍາເນີນງານ
ຟັງຊັນພື້ນຖານ
- ພະລັງງານ: ກົດ ພະລັງງານ button to turn your Dish receiver and programmed TV on or off.
- ປະລິມານ +/-: Adjusts the volume of your programmed television.
- CHANNEL +/-: Changes the channel on your Dish receiver.
- ປິດສຽງ: Mutes or unmutes the sound on your programmed television.
- ເລືອກ: ຢືນຢັນການເລືອກໃນເມນູ.
- ຄູ່ມື: ສະແດງຄູ່ມືໂຄງການ.
- ເມນູ: Accesses the main menu of your Dish receiver.
ຮູບພາບ: ໃກ້ຊິດ view of the central buttons on the Dish Network 20.1 Remote Control, highlighting navigation and function keys.
ຟັງຊັນຂັ້ນສູງ
- DVR: Accesses your Digital Video Recorder functions.
- PLAY/PAUSE, STOP, RECORD, FWD, BACK, SKIP BACK, SKIP FWD: Control playback of recorded content.
- ຂໍ້ມູນ: ສະແດງຂໍ້ມູນໂຄງການ.
- ຄົ້ນຫາ: Initiates content search.
- VIEW LIVE TV: Returns to live television viewing.
- PIP (ພາບໃນຮູບ): Controls Picture-in-Picture functionality, if supported by your receiver/TV.
- SWAP: Swaps between two active channels or PIP windows.
ບໍາລຸງຮັກສາ
ການປ່ຽນແບັດ
Replace batteries when the remote's response becomes sluggish or the indicator lights do not illuminate. Always replace all four AAA batteries simultaneously with new ones. Do not mix old and new batteries, or different types of batteries.
ທໍາຄວາມສະອາດ
To clean the remote, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
ການແກ້ໄຂບັນຫາ
ໄລຍະໄກບໍ່ຕອບສະຫນອງ
- Ensure there is a clear line of sight between the remote and the Dish receiver/TV. Obstructions can block the infrared signal.
- Check the batteries. Replace them if they are old or depleted.
- Verify that the correct mode button (SAT for receiver, TV for television) is selected before pressing a command.
- If controlling a Dish receiver, ensure the receiver is configured for IR mode, especially if it originally came with a UHF remote.
TV Not Programming
- Double-check the TV code entered. Ensure it matches your television brand.
- Try all available codes for your TV brand from the provided list.
- ໃຫ້ແນ່ໃຈວ່າທ່ານກຳລັງຖື TV mode button long enough for all four mode buttons to light up before releasing.
- ຖ້າ TV button does not flash three times after entering the code, the code was not accepted. Repeat the programming steps carefully.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 20.1 |
| ຍີ່ຫໍ້ | ຈານ |
| ການສື່ສານ | ອິນຟາເລດ (IR) |
| ແຫຼ່ງພະລັງງານ | ແບັດເຕີຣີ AAA 4 ກ້ອນ (ຕ້ອງການ) |
| ຂະໜາດສິນຄ້າ | 10.2 x 1.1 x 2.5 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 4.5 ອອນ |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | Dish Network Receivers, Televisions |
| ຄຸນນະສົມບັດພິເສດ | Ergonomic design, Learning capability |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and technical support, please refer to the official Dish Network website or contact Dish Network customer service directly.
ການປະຕິເສດທາງກົດໝາຍ: This product is shipped to continental U.S. only.
