AMS F5266/18

ຄູ່ມືຜູ້ໃຊ້ໂມງແຂວນຝາຜະໜັງ AMS F5266/18 ວິທະຍຸທີ່ທັນສະໄໝ

Model: F5266/18 | Brand: AMS

ແນະນຳ

This manual provides detailed instructions for the setup, operation, and maintenance of your AMS F5266/18 Modern Radio Pendulum Wall Clock. Please read this guide thoroughly to ensure proper use and longevity of your clock.

ສິນຄ້າເກີນview

The AMS F5266/18 is a radio-controlled pendulum wall clock featuring a modern design with a beech wood back panel and a golden metallic face. Its radio function ensures accurate timekeeping by automatically synchronizing with a time signal.

AMS F5266/18 Modern Radio Pendulum Wall Clock

Figure 1: AMS F5266/18 Modern Radio Pendulum Wall Clock. This image displays the clock's design, including its light beech wood back panel, golden metallic face with black Arabic numerals, and a matching golden pendulum.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

ຄໍາແນະນໍາການຕິດຕັ້ງ

  1. ການຫຸ້ມຫໍ່: ເອົາໂມງອອກຢ່າງລະມັດລະວັງຈາກການຫຸ້ມຫໍ່ຂອງມັນ. ກວດເບິ່ງຄວາມເສຍຫາຍໃດໆ.
  2. ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​: Locate the battery compartment on the back of the clock. Insert one (1) AA battery, ensuring correct polarity (+/-).
  3. Pendulum Installation: Gently attach the pendulum to its designated hook or slot, typically located below the clock mechanism. Ensure it hangs freely.
  4. ການຕິດຕັ້ງ: Choose a suitable wall location. The clock should be hung securely using appropriate wall anchors and screws (not included). Ensure the clock is level for optimal pendulum operation.
  5. Initial Time Synchronization: After battery installation, the clock will automatically search for the radio time signal. This process may take several minutes. Place the clock near a window or in an area with good signal reception for faster synchronization. The hands will move to 12:00 and then adjust to the correct time once the signal is received.

ຄໍາແນະນໍາການດໍາເນີນງານ

Your AMS F5266/18 clock is designed for automatic operation once set up correctly.

ບໍາລຸງຮັກສາ

ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
Clock does not start or stops.ແບັດເຕີຣີຕາຍ ຫຼື ຕິດຕັ້ງບໍ່ຖືກຕ້ອງ.ກວດສອບຂົ້ວຂອງແບັດເຕີຣີ. ປ່ຽນດ້ວຍແບັດເຕີຣີ AA ໜ່ວຍໃໝ່.
Clock does not set correct time.Poor radio signal reception.Move the clock to a location with better signal reception, ideally near a window. Allow several minutes for synchronization.
Pendulum ບໍ່ swing.Pendulum not properly installed or obstructed.Ensure the pendulum is correctly hooked and swings freely without touching the clock casing. Gently initiate the swing.
Clock makes a subtle ticking sound.Normal mechanical operation.This is a characteristic of the clock's movement and is not a defect.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. You may also visit the official AMS webສະຖານທີ່ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - F5266/18

ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ໂມງຄວບຄຸມດ້ວຍວິທະຍຸ AMS 5898 / 5893
ຄຳແນະນຳລະອຽດສຳລັບການຕັ້ງຄ່າ ແລະ ການນຳໃຊ້ໂມງຄວບຄຸມດ້ວຍວິທະຍຸ AMS 5898 ແລະ AMS 5893, ລວມທັງການຕັ້ງເວລາ, ຟັງຊັນເຕືອນໄພ, ການສະແດງອຸນຫະພູມ ແລະ ການບຳລຸງຮັກສາ.
ກ່ອນview AMS Wall Clock Operating Instructions
Operating instructions for AMS wall clocks, covering battery installation, replacement, and general usage in multiple languages.
ກ່ອນview ຄູ່ມືຊຸດປະເມີນຜົນກະດານອະແດບເຕີ ams AS5600L
ຄູ່ມືນີ້ໃຫ້ຂໍ້ມູນທີ່ຄົບຖ້ວນສຳລັບກະດານອະແດບເຕີ ams AS5600L-WL_EK_AB, ລວມທັງເນື້ອໃນຂອງຊຸດ, ລາຍລະອຽດຂອງກະດານ, ຄຳແນະນຳໃນການຕິດຕັ້ງ, ລາຍລະອຽດ pinout, ການເຮັດວຽກຂອງໂໝດ I2C, ແຜນວາດຮາດແວ, ຮູບແບບ PCB, ແລະຂໍ້ມູນການສັ່ງຊື້.
ກ່ອນview ams AS5048 14-bit Rotary Position Sensor ຄູ່ມືຜູ້ໃຊ້
ຄູ່ມືຜູ້ໃຊ້ນີ້ໃຫ້ຂໍ້ມູນລະອຽດກ່ຽວກັບ ams AS5048, ເຊັນເຊີຕໍາແຫນ່ງ rotary 14-bit ທີ່ມີມຸມດິຈິຕອນແລະຜົນຜະລິດ PWM. ມັນກວມເອົາກະດານອະແດບເຕີ AS5048, ການຕິດຕັ້ງ, pinout, ກໍລະນີການດໍາເນີນງານ (SPI, Daisy Chain), firmware coding examples, ແລະ schematics ຮາດແວ. ເປັນສິ່ງຈໍາເປັນສໍາລັບວິສະວະກອນທີ່ປະສົມປະສານເຊັນເຊີນີ້ເຂົ້າໄປໃນລະບົບຂອງພວກເຂົາ.
ກ່ອນview ຄູ່ມືຊຸດປະເມີນຜົນກະດານອະແດບເຕີ ams AS5048
ຄູ່ມືນີ້ລະບຸລາຍລະອຽດກ່ຽວກັບກະດານອະແດບເຕີ ams AS5048 (AS5048-EK-AB), ຊຸດປະເມີນຜົນສຳລັບເຊັນເຊີຕຳແໜ່ງແມ່ເຫຼັກ AS5048. ມັນກວມເອົາຮາດແວ, ຮູບແບບການເຮັດວຽກ (SPI, I2C), ຊອບແວamples, and contact information for ams AG.
ກ່ອນview AMS Clock Operating Instructions and Battery Replacement Guide
Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.