ແນະນຳ
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Lexmark MS810n Monochrome Laser Printer. Designed for efficiency and reliability, this printer offers high-speed monochrome printing with advanced features for professional environments.
The Lexmark MS810n is equipped with 256 MB of upgradable memory and a fast dual-core processor, ensuring effortless printing of documents with graphics and images. Its network-ready capabilities make it suitable for various office setups.
ສິນຄ້າເກີນview
ຮູບ 1: ດ້ານຫນ້າ view of the Lexmark MS810n Monochrome Laser Printer, showcasing ການອອກແບບກະທັດລັດແລະແຜງຄວບຄຸມຂອງມັນ.
The Lexmark MS810n is a robust monochrome laser printer designed for high-volume printing. Key components include the paper input tray, output bin, control panel with LCD display, and various connectivity ports.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ການພິມ monochrome ຄວາມໄວສູງເຖິງ 55 ຫນ້າຕໍ່ນາທີ (ppm).
- Network-ready with Gigabit Ethernet connectivity.
- 800 MHz dual-core processor and upgradable memory for efficient processing.
- Maximum input capacity of up to 4400 sheets with optional trays.
- High-yield toner cartridges for reduced maintenance.
- ຈໍ LCD intuitive ສໍາລັບການນໍາທາງແລະການຄວບຄຸມໄດ້ງ່າຍ.
ຄູ່ມືການຕິດຕັ້ງ
1. ການຫໍ່ເຄື່ອງ Printer
- ລະມັດລະວັງເອົາເຄື່ອງພິມອອກຈາກການຫຸ້ມຫໍ່ຂອງມັນ.
- ເອົາວັດສະດຸຫຸ້ມຫໍ່, ເທບ, ແລະຮູບເງົາປ້ອງກັນທັງຫມົດອອກຈາກພາຍນອກແລະພາຍໃນຂອງເຄື່ອງພິມ.
- ວາງເຄື່ອງພິມໄວ້ເທິງພື້ນທີ່ຄົງທີ່, ຮາບພຽງທີ່ມີລະບາຍອາກາດທີ່ພຽງພໍ.
2. Installing the Toner Cartridge and Imaging Unit
The Lexmark MS810n requires both a toner cartridge and an imaging unit for operation. Ensure both are correctly installed.
Figure 2: Opening the top cover of the printer to access the toner cartridge and imaging unit bay, indicated by a green tab.
- Open the front access door or top cover of the printer.
- Insert the imaging unit into its designated slot until it clicks into place.
- Unpack the toner cartridge and gently shake it to distribute the toner.
- Insert the toner cartridge into the imaging unit until it locks securely.
- ປິດຝາເຄື່ອງພິມ.
3. ການໂຫຼດເຈ້ຍ
- Pull out the paper tray until it stops.
- ປັບຕົວແນະນຳເຈ້ຍໃຫ້ກົງກັບຂະໜາດຂອງເຈ້ຍທີ່ເຈົ້າກຳລັງໂຫລດ.
- ບັນຈຸກະດາດໃສ່ຖາດ, ໃຫ້ແນ່ໃຈວ່າມັນຮາບພຽງຢູ່ແລະບໍ່ເກີນເສັ້ນຕື່ມຂໍ້ມູນສູງສຸດ.
- ຄ່ອຍໆຍູ້ຖາດເຈ້ຍກັບຄືນໄປບ່ອນເຂົ້າໄປໃນເຄື່ອງພິມ.
4. ການເຊື່ອມຕໍ່ເຄື່ອງພິມ
The MS810n supports Ethernet connectivity for network printing.
- Connect one end of an Ethernet cable to the printer's Ethernet port.
- Connect the other end of the Ethernet cable to an active network port or router.
- ເຊື່ອມຕໍ່ສາຍໄຟກັບເຄື່ອງພິມ ແລະຈາກນັ້ນໄປຫາປສຽບໄຟຟ້າທີ່ມີດິນ.
- ກົດປຸ່ມເປີດປິດເພື່ອເປີດເຄື່ອງພິມ.
5. ການຕິດຕັ້ງໄດເວີ
For optimal performance, install the latest printer drivers from the Lexmark official website. The printer is network-ready, allowing for easy integration into existing network infrastructures.
ຄໍາແນະນໍາການດໍາເນີນງານ
ການພິມເອກະສານ
- ກວດໃຫ້ແນ່ໃຈວ່າເຄື່ອງພິມເປີດຢູ່ ແລະເຊື່ອມຕໍ່ກັບເຄືອຂ່າຍ.
- ຈາກຄອມພິວເຕີຂອງທ່ານ, ເປີດເອກະສານທີ່ທ່ານຕ້ອງການພິມ.
- ເລືອກ "ພິມ" ຈາກເມນູຂອງແອັບພລິເຄຊັນ (ເຊັ່ນ: File > ພິມ).
- Choose "Lexmark MS810n" from the list of available printers.
- Adjust print settings as needed (e.g., number of copies, paper source, print quality).
- ຄລິກ "ພິມ" ເພື່ອສົ່ງວຽກໄປຫາເຄື່ອງພິມ.
ການນໍາໃຊ້ກະດານຄວບຄຸມ
The LCD display and keypad allow for direct control over printer functions and settings.
- ໃຊ້ປຸ່ມລູກສອນເພື່ອນຳທາງຜ່ານເມນູຕ່າງໆ.
- ກົດ OK ປຸ່ມເພື່ອເລືອກທາງເລືອກ.
- ໄດ້ ກັບຄືນໄປບ່ອນ button returns to the previous screen.
- ໄດ້ ບ້ານ button returns to the main menu.
Direct USB Printing
The Lexmark MS810n features a USB port for direct printing from a USB flash drive.
Figure 3: A hand inserting a USB flash drive into the dedicated USB port located on the top surface of the printer, near the control panel.
- Insert a USB flash drive into the USB port on the front of the printer.
- The printer's display will prompt you to select a document to print.
- ທ່ອງໄປຫາໂດຍຜ່ານ files on the USB drive using the control panel.
- Select the desired document and confirm printing.
ບໍາລຸງຮັກສາ
ການປ່ຽນຕະຫລັບຫມຶກ
When the toner level is low, the printer will display a message. Replace the toner cartridge to ensure continued print quality.
- ເປີດປະຕູທາງເຂົ້າຂອງເຄື່ອງພິມ.
- Grasp the handle of the old toner cartridge and pull it out.
- Unpack the new Lexmark toner cartridge. Gently shake it to distribute the toner.
- Insert the new cartridge into the imaging unit until it clicks into place.
- ປິດປະຕູທາງເຂົ້າ.
ການປ່ຽນໜ່ວຍພາບ
The imaging unit has a finite lifespan and will need replacement after a certain number of pages. The printer will notify you when replacement is due.
- ເປີດປະຕູທາງເຂົ້າ.
- Remove the toner cartridge from the imaging unit.
- Grasp the handle of the imaging unit and pull it out of the printer.
- ຖອດຊຸດໜ່ວຍພາບໃໝ່.
- Insert the new imaging unit into the printer until it clicks into place.
- Reinstall the toner cartridge.
- ປິດປະຕູທາງເຂົ້າ.
ການເຮັດຄວາມສະອາດເຄື່ອງພິມ
- ເຊັດດ້ານນອກຂອງເຄື່ອງພິມດ້ວຍຄວາມອ່ອນ, ງamp, ຜ້າບໍ່ມີ lint.
- ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- Periodically clean the paper path rollers if paper jams become frequent. Refer to the on-screen instructions or Lexmark support for detailed steps.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງພິມບໍ່ເປີດ | ບໍ່ໄດ້ເຊື່ອມຕໍ່ສາຍໄຟ; ບັນຫາປລັກສຽບໄຟຟ້າ | Ensure power cord is securely connected to printer and outlet. Test outlet with another device. |
| ເຈ້ຍຕິດ | Incorrect paper loading; Overfilled tray; Foreign objects in paper path | Remove jammed paper carefully. Ensure paper is loaded correctly and not overfilled. Check for and remove any foreign objects. |
| ຄຸນນະພາບການພິມບໍ່ດີ | Low toner; Worn imaging unit; Incorrect print settings | Replace toner cartridge. Replace imaging unit if necessary. Adjust print quality settings in printer driver. |
| Printer not detected on network | Network cable disconnected; Incorrect IP settings; Firewall blocking connection | Verify Ethernet cable connection. Check printer's IP address and network settings. Temporarily disable firewall to test. |
| ລະຫັດຂໍ້ຜິດພາດໃນການສະແດງ | Specific internal issue | Note the error code and refer to the Lexmark support website or contact technical support for specific solutions. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຊື່ຕົວແບບ | MS810n |
| ເຕັກໂນໂລຊີການພິມ | ເລເຊີ (ໂມໂນໂຄມ) |
| ຄວາມໄວການພິມສູງສຸດ (ໂມໂນໂຄມ) | 55 ppm |
| ຄວາມລະອຽດການພິມສູງສຸດ | 1200 x 1200 dpi |
| ໂຮງງານຜະລິດ | 800 MHz Dual-Core |
| Memory (Standard/Maximum) | 512 MB / 2.5 GB (upgradable) |
| ການເຊື່ອມຕໍ່ | ອີເທີເນັດ, USB 2.0 |
| ຄວາມອາດສາມາດຂອງແຜ່ນປ້ອນຂໍ້ມູນສູງສຸດ | 4400 ແຜ່ນ (ມີຖາດທາງເລືອກ) |
| ປະເພດສື່ທີ່ຮອງຮັບ | Envelopes, Paper (plain), Transparencies |
| ຂະ ໜາດ ສື່ທີ່ຮອງຮັບ | Up to Legal (8.5 x 14 inch) |
| ປະເພດການສະແດງ | ຈໍ LCD |
| ນ້ໍາຫນັກລາຍການ | 52.2 ປອນ |
| ຂະໜາດສິນຄ້າ | 21 x 24.5 x 22 ນິ້ວ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ຂໍ້ມູນການຮັບປະກັນ
The Lexmark MS810n Monochrome Laser Printer comes with a ການຮັບປະກັນຈໍາກັດ. For specific terms and conditions, including duration and coverage details, please refer to the warranty documentation included with your product or visit the official Lexmark webເວັບໄຊ.
ສະຫນັບສະຫນູນດ້ານວິຊາການ
For technical assistance, driver downloads, or further troubleshooting, please visit the official Lexmark support webເວັບໄຊ. ໂດຍທົ່ວໄປແລ້ວທ່ານສາມາດຊອກຫາຊັບພະຍາກອນ, FAQs, ແລະຂໍ້ມູນຕິດຕໍ່ສໍາລັບການບໍລິການລູກຄ້າຢູ່ທີ່ນັ້ນ.
Official Lexmark Support: www.lexmark.com/en_us/support
