Eiko 43A/CL/H-120V

Eiko Halogen A19 43W Clear 120V Bulb User Manual

Model: 43A/CL/H-120V

1. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

Please read all instructions carefully before installing or using this Eiko Halogen A19 bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.

2. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps to safely install your Eiko Halogen A19 bulb:

  1. ປິດໄຟ: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off the power at the main circuit breaker or fuse box.
  2. ອະນຸຍາດໃຫ້ເຮັດຄວາມເຢັນ: If replacing an existing bulb, ensure it has cooled down completely before touching it.
  3. ເອົາດອກໄຟເກົ່າອອກ: Carefully unscrew the old bulb counter-clockwise from the socket.
  4. ກວດ​ສອບ Fixture​: Check the light fixture's socket for any damage or debris. Ensure it is clean and dry.
  5. ຕິດຕັ້ງດອກໄຟໃໝ່: Gently screw the Eiko Halogen A19 bulb clockwise into the socket until it is snug. Do not overtighten.
  6. ຟື້ນຟູພະລັງງານ: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch.
Eiko Halogen A19 43W Clear 120V Bulb

Image 1: Eiko Halogen A19 43W Clear 120V Bulb. This image shows the clear glass bulb with a standard screw-in base, typical of an A19 shape.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

The Eiko Halogen A19 bulb operates like a standard incandescent bulb. Once installed, simply use the light fixture's switch to turn the bulb on or off.

4. ບໍາລຸງຮັກສາ

Minimal maintenance is required for your Eiko Halogen A19 bulb. However, following these guidelines can help ensure optimal performance and longevity:

5. ການແກ້ໄຂບັນຫາ

If your Eiko Halogen A19 bulb is not functioning as expected, refer to the following common issues and solutions:

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
Bulb ບໍ່ສະຫວ່າງ.
  • ບໍ່ມີ ອຳ ນາດຕໍ່ກັບອຸປະກອນ.
  • ຫລອດໄຟບໍ່ໄດ້ສຽບເຂົ້າຢ່າງຖືກຕ້ອງ.
  • Bulb ມີຄວາມຜິດຫຼືໄດ້ເຖິງຈຸດສິ້ນສຸດຂອງຊີວິດ.
  • ສະວິດໄຟຕິດອຸປະກອນປິດຢູ່.
  • ກວດເບິ່ງເຄື່ອງຕັດວົງຈອນ/ຟິວ.
  • ກວດໃຫ້ແນ່ໃຈວ່າຫລອດໄຟຖືກສຽບໃສ່ເຕົ້າຮັບຢ່າງປອດໄພ (ປິດເຄື່ອງກ່ອນ).
  • ປ່ຽນຫລອດໄຟດ້ວຍອັນໃໝ່.
  • Turn on the fixture switch.
ດອກໄຟ flickers.
  • Loose connection in the socket.
  • ສະຫຼັບ dimmer ບໍ່ເຂົ້າກັນໄດ້.
  • ສະບັບtage ການເຫນັງຕີງ.
  • Turn off power, then tighten the bulb.
  • Ensure dimmer is compatible with halogen bulbs.
  • ປຶກສາຫາລືກັບຊ່າງໄຟຟ້າຖ້າ voltage ບັນຫາຍັງຄົງຢູ່.
ດອກໄຟໄໝ້ໄວ.
  • ເກີນວັດtage ສໍາລັບ fixture ໄດ້.
  • Frequent power surges.
  • ການສັ່ນສະເທືອນຫຼາຍເກີນໄປ.
  • ແຕະແກ້ວດ້ວຍມືເປົ່າໃນລະຫວ່າງການຕິດຕັ້ງ.
  • Verify fixture's maximum wattage.
  • Consider a surge protector for the circuit.
  • ໃຫ້ແນ່ໃຈວ່າ fixture ມີຄວາມຫມັ້ນຄົງ.
  • Handle new bulbs with a cloth or gloves.

6. ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ

Detailed specifications for the Eiko Halogen A19 43W Clear 120V bulb:

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

7.1. ການຮັບປະກັນຈໍາກັດ

Eiko products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship under normal use. The specific duration and terms of the warranty may vary. Please retain your proof of purchase for warranty claims.

7.2. ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, warranty inquiries, or further information regarding your Eiko Halogen A19 bulb, please contact Eiko customer support. Refer to the official Eiko webສະຖານທີ່ຫຼືການຫຸ້ມຫໍ່ຜະລິດຕະພັນສໍາລັບຂໍ້ມູນຕິດຕໍ່ໃນປະຈຸບັນຫຼາຍທີ່ສຸດ.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - 43A/CL/H-120V

ກ່ອນview EIKO LHS1 Series LED Linear High Bay Installation Instructions
Comprehensive installation guide for the EIKO LHS1 Series LED Linear High Bay fixtures, covering overview, safety precautions, mounting options, wiring diagrams, and controls.
ກ່ອນview ຄຳແນະນຳໃນການຕິດຕັ້ງຫລອດໄຟ LED T8 ແບບເສັ້ນຊື່ EIKO
ຄໍາແນະນໍາການຕິດຕັ້ງທີ່ສົມບູນແບບສໍາລັບ EIKO LED T8 Type B Linear Tube lights, ກວມເອົາການລະມັດລະວັງດ້ານຄວາມປອດໄພ, ການບໍາລຸງຮັກສາ, ແລະແຜນວາດສາຍໄຟລະອຽດສໍາລັບ luminaires fluorescent retrofitting.
ກ່ອນview ຄຳແນະນຳໃນການຕິດຕັ້ງເຄື່ອງວັດແທກປະລິມານ LED EIKO VL1 ຊຸດ
ຄູ່ມືການຕິດຕັ້ງທີ່ຄົບຖ້ວນສຳລັບ EIKO VL1 Series LED Volumetric Troffer, ເຊິ່ງກວມເອົາview, ຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພ, ຂັ້ນຕອນການຕິດຕັ້ງ, ແຜນວາດສາຍໄຟ, ແລະ ການຕິດຕັ້ງເຊັນເຊີ. ລວມທັງການເລືອກພະລັງງານ ແລະ CCT.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງເຊັນເຊີປັບຄວາມສະຫວ່າງສອງລະດັບຂອງໄມໂຄເວຟ EIKO Z10 ພ້ອມດ້ວຍໂຟໂຕເຊວ
ຄູ່ມືການຕິດຕັ້ງທີ່ສົມບູນແບບສໍາລັບ EIKO Z10 Microwave Bi-Level Dimming Sensor ກັບ Photocell, ລາຍລະອຽດສະເພາະ, ການປົກຫຸ້ມຂອງເຊັນເຊີ, ແລະຂໍ້ມູນການປະຕິບັດຕາມ FCC ສໍາລັບການຕິດຕັ້ງແລະການດໍາເນີນງານທີ່ເຫມາະສົມ.
ກ່ອນview ຄຳແນະນຳໃນການຕິດຕັ້ງແຖບໄຟ LED ສຳລັບການຄ້າ EIKO CSX1 ຊຸດພຣີມຽມ
ຄູ່ມືການຕິດຕັ້ງທີ່ຄົບຖ້ວນສຳລັບອຸປະກອນຕິດຕັ້ງ LED Commercial Strip EIKO CSX1 Series Premium, ເຊິ່ງກວມເອົາການຕິດຕັ້ງເທິງໜ້າດິນ, ການຕິດຕັ້ງຕ່ອງໂສ້, ແລະ ການຕິດຕັ້ງອຸປະກອນເສີມເພີ່ມເຕີມ.
ກ່ອນview ຄໍາແນະນໍາການຕິດຕັ້ງ EIKO LED Surface Canopy Square
ເອກະສານສະບັບນີ້ໃຫ້ຄຳແນະນຳໃນການຕິດຕັ້ງລະອຽດສຳລັບໂຄມໄຟ EIKO LED Surface Canopy Square, ເຊິ່ງກວມເອົາຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພ, ການຕິດຕັ້ງພື້ນຜິວ, ການເຊື່ອມຕໍ່ສາຍໄຟຂ້າງ, ການຕິດຕັ້ງແຂວນ, ການປັບພະລັງງານ, ແລະ ການຕິດຕັ້ງເຊັນເຊີ Z10.