1. ບົດແນະນຳ
This manual provides essential information for the proper use, installation, and maintenance of the Connect 31747 Common Rail Copper Injector Washers. These washers are designed for sealing common rail diesel injectors, ensuring a secure and leak-free connection within the fuel system. Adhering to these instructions will help ensure optimal performance and longevity of the product.
Image 1.1: A pack of 50 Connect 31747 Common Rail Copper Injector Washers. These washers are circular, made of copper, and are essential for sealing diesel injectors.
2. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Proper installation of injector washers is critical for preventing fuel leaks and maintaining engine performance. Always ensure the engine is cool before beginning any work on the fuel system.
- ຄວາມປອດໄພທໍາອິດ: Disconnect the vehicle's battery and relieve any fuel system pressure before starting. Wear appropriate personal protective equipment, including gloves and eye protection.
- ຄວາມສະອາດ: Thoroughly clean the injector bore and the injector tip to remove any carbon deposits, old washer residue, or debris. A clean surface is essential for a proper seal.
- Washer Placement: Carefully place a new Connect 31747 copper injector washer onto the injector tip. Ensure it sits flat and is correctly oriented. Do not reuse old washers.
- Injector Reinstallation: Reinstall the injector into its bore, ensuring it seats correctly. Follow the vehicle manufacturer's torque specifications for tightening the injector retaining bolt or clamp. Overtightening or undertightening can lead to leaks or damage.
- ກວດສອບລະບົບ: After installation, reconnect the battery and prime the fuel system according to the vehicle manufacturer's instructions. Inspect for any fuel leaks before starting the engine.
3. ການປະຕິບັດການພິຈາລະນາ
Once installed, the Connect 31747 copper injector washers are designed to provide a reliable seal under normal operating conditions. No specific operational steps are required for the washers themselves, as their function is passive sealing.
- Engine Performance: A properly sealed injector system contributes to efficient fuel combustion and optimal engine performance.
- ການກວດກາປົກກະຕິ: Periodically check around the injectors for any signs of fuel leakage or exhaust gas blow-by, which could indicate a compromised washer seal.
4. ບໍາລຸງຮັກສາ
The Connect 31747 copper injector washers are consumable components and do not require maintenance themselves. Their primary maintenance consideration is replacement.
- ຕາຕະລາງການທົດແທນ: It is highly recommended to replace injector washers every time an injector is removed for service, inspection, or replacement. Copper washers deform to create a seal and are not designed for reuse.
- ການເກັບຮັກສາ: Store unused washers in a clean, dry environment to prevent contamination or damage.
5. ການແກ້ໄຂບັນຫາ
Issues related to injector washers typically manifest as leaks or poor engine performance. This section outlines common problems and their potential solutions.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Fuel Leakage around Injector | Improperly seated washer, damaged washer, reused washer, incorrect torque. | Remove injector, clean bore, install new washer correctly, re-torque to specification. |
| Exhaust Gas Blow-by (soot around injector) | Washer not sealing combustion gases, often due to improper installation or damage. | Remove injector, clean bore and injector tip thoroughly, install new washer, ensure correct seating and torque. |
| Rough Engine Idle / Misfire | While not directly caused by the washer, a severe leak can affect fuel pressure and combustion. | Check for leaks as described above. If no leaks, investigate other fuel system or engine components. |
6. ຂໍ້ມູນຈໍາເພາະ
Detailed specifications for the Connect 31747 Common Rail Copper Injector Washer.
| ຄຸນລັກສະນະ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 31747 |
| ວັດສະດຸ | ທອງແດງ |
| ເສັ້ນຜ່າສູນກາງນອກ | 14.6 ມມ |
| ເສັ້ນຜ່າສູນກາງພາຍໃນ | 7.5 ມມ |
| ຄວາມຫນາ | 3.0 ມມ |
| ປະລິມານຕໍ່ຊອງ | 50 ປ່ຽງ |
| ນ້ໍາຫນັກລາຍການ | 6 ounces (approx. for the pack) |
| ຂະໜາດສິນຄ້າ | 0.51 x 4.88 x 5.28 ນິ້ວ (ການຫຸ້ມຫໍ່) |
| ຜູ້ຜະລິດ | The Tool Connection Ltd |
| GTIN | 05018341317478 |
7. ຂໍ້ມູນການຮັບປະກັນ
Connect products are manufactured to high standards. For specific warranty details regarding the Connect 31747 Common Rail Copper Injector Washers, please refer to the official Connect website or contact your point of purchase. Warranty typically covers manufacturing defects.
8. ສະຫນັບສະຫນູນ
For technical assistance, product inquiries, or support, please contact Connect customer service through their official website or the retailer from whom the product was purchased. When contacting support, please have the model number (31747) and any relevant purchase information available.
