1. ຜະລິດຕະພັນເກີນview
The BriskHeat DHCS13 is a standard heavy-duty drum heater designed for metal drums and pails, specifically fitting 30-gallon (114L) containers. This heater provides efficient and uniform heating for various materials, utilizing a robust construction for durability and safety.
Its design incorporates a patented 360-degree grounded multi-stranded heating element, laminated between two extra-thick layers of 20mil fiberglass-reinforced silicone rubber. This construction ensures excellent strength, durability, and uniform heat distribution, meeting NEC 427.23 standards. The unit is moisture and chemical resistant and features an adjustable thermostat for precise temperature control.
Image 1.1: The BriskHeat DHCS13 drum heater shown installed on a black 30-gallon metal drum. The orange heating bands are visible wrapped around the drum, secured by spring closures.
2. ຂໍ້ມູນຄວາມປອດໄພ
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, serious injury, or death.
- Ensure the heater is used only on metal drums and pails as specified. Do not use on plastic drums.
- ກວດສອບການສະຫນອງພະລັງງານ voltage matches the heater's requirements (120VAC).
- Always ensure the heater is properly grounded. The unit includes a standard 3-prong plug (NEMA 5-15) for this purpose.
- Do not operate the heater in explosive atmospheres or near flammable vapors unless specifically rated for such environments. This heater is not intrinsically safe.
- Avoid direct contact with the heating surface during operation, as temperatures can reach up to 450°F (232°C).
- Do not immerse the heater in liquid. It is moisture and chemical resistant, but not submersible.
- ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະດໍາເນີນການບໍາລຸງຮັກສາຫຼືການປັບ.
- ຮັກສາສາຍໄຟໃຫ້ຫ່າງຈາກພື້ນຜິວທີ່ຮ້ອນ ແລະ ແຫຼມ.
- Do not modify the heater or its components. Use only genuine BriskHeat replacement parts if necessary.
3. ການຫຸ້ມຫໍ່ແລະເນື້ອໃນ
Carefully unpack the BriskHeat DHCS13 drum heater from its packaging. Inspect the unit for any signs of shipping damage. If damage is observed, do not proceed with installation and contact your supplier immediately.
ເນື້ອໃນຊຸດ:
- BriskHeat DHCS13 Drum Heater (1 unit)
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
The DHCS13 drum heater is designed for easy installation on 30-gallon metal drums.
- ກຽມກອງ: Ensure the metal drum is clean and free from any debris or flammable residues on its exterior surface where the heater will be applied.
- ຕໍາແໜ່ງເຄື່ອງເຮັດຄວາມຮ້ອນ: Wrap the DHCS13 drum heater around the circumference of the 30-gallon metal drum. Position it at the desired height, typically around the lower or middle section of the drum, depending on the material to be heated.
- Secure the Heater: The heater features a spring closure mechanism. Expand the spring closure as needed (up to 3 inches / 76mm) to securely fasten the heater around the drum. Ensure the heater fits snugly against the drum surface for optimal heat transfer.
- ເຊື່ອມຕໍ່ພະລັງງານ: Plug the 6ft (1.8m) long power cord with its standard 3-prong plug (NEMA 5-15) into a properly grounded 120VAC electrical outlet. Ensure the outlet is capable of supplying 1000 watts.
- ກວດສອບເບື້ອງຕົ້ນ: Before setting the temperature, ensure the heater is firmly attached and the power cord is not pinched or in contact with any hot surfaces.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
The DHCS13 drum heater is equipped with an adjustable thermostat for precise temperature control.
- ປັບເຄື່ອງຄວບຄຸມອຸນຫະພູມ: Locate the adjustable thermostat dial on the heater. The thermostat has a temperature range of 50°F to 425°F (10°C to 218°C).
- ກໍານົດອຸນຫະພູມທີ່ຕ້ອງການ: Rotate the dial to set the desired temperature for the contents of the drum. Start with a lower setting and gradually increase if higher temperatures are required.
- ຕິດຕາມກວດກາຄວາມຮ້ອນ: The heater will begin to warm the drum. The thermostat will cycle the heating element on and off to maintain the set temperature.
- ການປົກປ້ອງອຸນຫະພູມເກີນ: The maximum exposure temperature on the heating surface is 450°F (232°C). The thermostat will prevent the surface from exceeding this temperature.
- ປິດພະລັງງານ: To turn off the heater, unplug it from the power outlet.
ໝາຍເຫດ: The actual temperature of the drum contents may vary based on ambient temperature, drum material, and the specific properties of the material being heated. It is recommended to monitor the internal temperature of the drum contents, especially for temperature-sensitive materials.
6. ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and safe operation of your BriskHeat DHCS13 drum heater.
- ທໍາຄວາມສະອາດ: Disconnect the heater from power before cleaning. Use a damp cloth to wipe down the exterior of the heater. Do not use abrasive cleaners or solvents that could damage the silicone rubber.
- ການກວດກາ: Periodically inspect the heater for any signs of wear, damage, or fraying of the power cord. Check the integrity of the silicone rubber and the spring closure mechanism.
- ການເກັບຮັກສາ: When not in use, store the heater in a clean, dry place, away from direct sunlight and extreme temperatures.
- ການສ້ອມແປງ: Do not attempt to repair damaged components yourself. Contact BriskHeat customer support or a qualified technician for repairs.
7. ການແກ້ໄຂບັນຫາ
If you encounter issues with your DHCS13 drum heater, refer to the following common troubleshooting steps:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Heater not warming up. | ບໍ່ມີພະລັງງານກັບຫນ່ວຍບໍລິການ. ເຄື່ອງຄວບຄຸມອຸນຫະພູມຕໍ່າເກີນໄປ. ປລັກສຽບໄຟຜິດພາດ. | Check if the heater is plugged in. ເພີ່ມການຕັ້ງຄ່າເຄື່ອງຄວບຄຸມອຸນຫະພູມ. ທົດສອບປລັກສຽບໄຟດ້ວຍອຸປະກອນອື່ນ ຫຼືລອງປລັກສຽບອື່ນ. |
| ເຄື່ອງເຮັດຄວາມຮ້ອນບໍ່ຮອດອຸນຫະພູມທີ່ຕ້ອງການ. | ເຄື່ອງຄວບຄຸມອຸນຫະພູມຕໍ່າເກີນໄປ. Drum contents too cold or large volume. Poor contact with drum surface. | ເພີ່ມການຕັ້ງຄ່າເຄື່ອງຄວບຄຸມອຸນຫະພູມ. Allow more time for heating, or consider additional insulation for the drum. Ensure the heater is snugly secured around the drum. |
| ເຄື່ອງເຮັດຄວາມຮ້ອນເປີດ ແລະ ປິດເລື້ອຍໆ. | Normal operation (thermostat maintaining temperature). Thermostat sensor issue. | This is typically normal. If cycling is excessive or erratic, contact support. |
| Visible damage to heater or cord. | ຄວາມເສຍຫາຍທາງດ້ານຮ່າງກາຍ. | Immediately disconnect power. Do not use. Contact BriskHeat for repair or replacement. |
If the problem persists after attempting these solutions, please contact BriskHeat customer support.
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນລັກສະນະ | ມູນຄ່າ |
|---|---|
| ໝາຍເລກຕົວແບບ | DHCS13 |
| ຄວາມອາດສາມາດ Drum | 30-Gallon (114L) Metal Drums |
| ສະບັບtage | 120VAC |
| ວັດ | 1000W |
| ຂອບເຂດອຸນຫະພູມຂອງເຄື່ອງຄວບຄຸມອຸນຫະພູມ | 50°F ຫາ 425°F (10°C ຫາ 218°C) |
| Maximum Exposure Temperature (Heating Surface) | 450°F (232°C) |
| ວັດສະດຸ | 2-Layer Fiberglass Reinforced Silicone Rubber |
| ຄວາມເຂັ້ມແຂງ Dielectric | 2000V |
| ຂະໜາດ (W x L) | 4in (102mm) x 58.5in (1496mm) |
| Diameter (for drum) | 18.6ນິ້ວ473ມມ |
| ຄວາມຍາວຂອງສາຍໄຟ | 6 ຟຸດ (1.8 ແມັດ) |
| ປະເພດສຽບ | Standard 3-prong (NEMA 5-15) |
| ການຖົມດິນ | ຮາກຖານ |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
BriskHeat products are manufactured to the highest quality standards. For information regarding product warranty, please refer to the warranty statement provided with your purchase or visit the official BriskHeat webເວັບໄຊ.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact BriskHeat customer support:
- ຜູ້ຜະລິດ: BriskHeat
- ຂໍ້ມູນຕິດຕໍ່: Refer to the BriskHeat webສະຖານທີ່ຫຼືການຫຸ້ມຫໍ່ຜະລິດຕະພັນສໍາລັບລາຍລະອຽດການຕິດຕໍ່ໃນປະຈຸບັນຫຼາຍທີ່ສຸດ.
