1. ບົດແນະນຳ
The APC Back-UPS RS 700 VA Tower UPS (Uninterruptible Power Supply) provides reliable battery backup and surge protection for your electronic devices. Designed to safeguard your equipment from power outages, surges, and spikes, this unit ensures continuous operation and protects against data loss. It features a 700VA/450W capacity, offering approximately 3 minutes of full load runtime.
ຮູບທີ 1: ດ້ານໜ້າ view of the APC Back-UPS RS 700 VA Tower UPS. The display shows current load, online status, estimated run time in minutes (e.g., 30 minutes), and AVR (Automatic Voltage Regulation) status. Power and display control buttons are located at the top.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ຮູບແບບສີຂຽວ: Patented operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Battery Failure Notification: ສະໜອງການວິເຄາະຄວາມຜິດຂອງການເຕືອນລ່ວງໜ້າກ່ຽວກັບແບັດເຕີຣີທີ່ຊ່ວຍໃຫ້ການບຳລຸງຮັກສາປ້ອງກັນໄດ້ທັນເວລາ.
- Power-Saving Outlets: Automatically cuts power to idle equipment to conserve electricity.
- Resettable Circuit Breaker: ການຟື້ນຕົວງ່າຍຈາກການ overloads; ບໍ່ຈໍາເປັນຕ້ອງປ່ຽນ fuse.
- Battery-Protected and Surge-Only Outlets: Protects connected equipment from power surges and spikes, while providing battery backup power during outages to critical devices.
- Cold-Start Capable: ສະໜອງພະລັງງານແບັດເຕີຣີຊົ່ວຄາວເມື່ອໄຟເຄື່ອງໃຊ້ໄຟຟ້າໝົດ.
- Hot-Swappable Batteries: ຮັບປະກັນພະລັງງານທີ່ສະອາດ, ບໍ່ຕິດຂັດກັບອຸປະກອນທີ່ມີການປ້ອງກັນໃນຂະນະທີ່ກໍາລັງປ່ຽນແບັດ.
- Disconnected Battery Notification: ເຕືອນເມື່ອບໍ່ມີແບັດເຕີຣີເພື່ອສະໜອງພະລັງງານສຳຮອງ.
- Dataline Surge Protection: Provides protection of connected equipment from power surges on the data lines.
- ການທົດສອບດ້ວຍຕົນເອງອັດຕະໂນມັດ: ການທົດສອບແບັດເຕີຣີດ້ວຍຕົນເອງເປັນໄລຍະເຮັດໃຫ້ແນ່ໃຈວ່າການກວດພົບຂອງຫມໍ້ໄຟທີ່ຈໍາເປັນຕ້ອງໄດ້ຮັບການທົດແທນ.
- ປັບ Voltage-Transfer Points: ຂະຫຍາຍອາຍຸແບັດເຕີຣີທີ່ມີປະໂຫຍດສູງສຸດໂດຍການຂະຫຍາຍການປ້ອນຂໍ້ມູນ voltage window or tightening it to regulate output voltage.
- ປັບ Voltage ຄວາມອ່ອນໄຫວ: ສະຫນອງຄວາມສາມາດໃນການປັບ UPS ສໍາລັບການປະຕິບັດທີ່ດີທີ່ສຸດໃນສະພາບແວດລ້ອມພະລັງງານສະເພາະຫຼືຄໍາຮ້ອງສະຫມັກເຄື່ອງກໍາເນີດໄຟຟ້າ.
- ໂມງປຸກທີ່ຟັງໄດ້: Provides notification of changing utility power and UPS power conditions.
- User-Replaceable Batteries: Increases availability by allowing a trained user to perform upgrades and replacements of batteries reducing Mean Time to Repair (MTTR).
- ການເຊື່ອມຕໍ່ USB: Provides management of the UPS via a USB port.
- ການເຊື່ອມຕໍ່ Serial: ໃຫ້ການຄຸ້ມຄອງ UPS ຜ່ານພອດ serial.
- Transformer-Block Spaced Outlets: Protects equipment with input transformer blocks without blocking access to other receptacles.
- Boost and Trim Automatic Voltage ລະບຽບການ (AVR): Corrects low and high voltages without using the battery, extending battery life.
- ການຈັດການແບັດເຕີຣີອັດສະລິຍະ: ເພີ່ມປະສິດທິພາບຂອງແບດເຕີຣີ, ອາຍຸສູງສຸດ, ແລະຄວາມຫນ້າເຊື່ອຖືໂດຍຜ່ານການສາກໄຟອັດສະລິຍະ, ຄວາມຊັດເຈນ.
- Safety-Agency Approved: ໃຫ້ແນ່ໃຈວ່າຜະລິດຕະພັນໄດ້ຖືກທົດສອບແລະອະນຸມັດໃຫ້ເຮັດວຽກຢ່າງປອດໄພກັບອຸປະກອນຜູ້ໃຫ້ບໍລິການທີ່ເຊື່ອມຕໍ່ແລະພາຍໃນສະພາບແວດລ້ອມທີ່ກໍານົດໄວ້.
- Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
- Battery Replacement Without Tools: Enables quick, easy battery replacement.
- LCD Graphics Display: Provides clear, concise information with text and mimic diagrams that display modes of operation, system parameters, and alarms.
2. ຕັ້ງຄ່າ
2.1 ການຫຸ້ມຫໍ່ແລະການຈັດວາງ
Carefully unpack the UPS and inspect it for any shipping damage. Place the UPS in a location that is clean, dry, and away from direct sunlight or excessive heat. Ensure adequate ventilation around the unit. The tower form factor allows for vertical placement.
2.2 ການເຊື່ອມຕໍ່ກັບພະລັງງານ
- Connect the UPS power cord to a grounded 3-prong outlet. The power cord is approximately 5 feet long, providing flexibility for placement.
- Allow the UPS to charge for at least 24 hours before connecting critical equipment to ensure full battery capacity.
- Observe the Building Wiring Fault Indicator. If this LED illuminates, it indicates a potential wiring problem in the wall circuit that should be addressed by a qualified electrician.
2.3 ອຸປະກອນເຊື່ອມຕໍ່
The UPS features both battery-protected and surge-only outlets.
- Battery-Protected Outlets (NEMA 5-15R): Connect critical equipment such as computers, monitors, and network devices (modems, routers) to these outlets. These outlets provide power during outages and protection against surges.
- Surge-Only Outlets (NEMA 5-15R): Connect non-critical equipment like printers, scanners, or desk lamps to these outlets. These outlets provide surge protection but do not offer battery backup during a power failure.
2.4 Data Line Protection
Connect your telephone, network, or coaxial cables through the designated ports on the UPS to protect against surges traveling through these lines.
2.5 USB and Serial Connectivity
For advanced management and monitoring, connect the UPS to your computer using the provided USB or serial cable. Install the appropriate power management software (available from APC's website) to configure settings, monitor power conditions, and perform graceful shutdowns.
2.6 ການຕິດຝາ
The unit can be wall-mounted using the keyhole slots on the back. Ensure the mounting surface is sturdy enough to support the weight of the UPS and that proper fasteners are used.
3. ການດໍາເນີນງານ
3.1 ການເປີດ/ປິດ
- To power on the UPS, press the power button located on the front panel.
- To power off the UPS, press and hold the power button until the unit shuts down.
3.2 LCD Graphics Display
The LCD display provides real-time information about the UPS status, including:
- ລະດັບການໂຫຼດ: ຊີ້ໃຫ້ເຫັນເຖິງເປີເຊັນtage of the UPS's capacity being used by connected equipment.
- ສະຖານະອອນລາຍ: Shows when the UPS is operating on utility power.
- ເວລາແລ່ນໂດຍປະມານ: Displays the approximate remaining battery runtime in minutes during a power outage.
- AVR Status: Indicates when Automatic Voltage Regulation is actively correcting input voltage ໂດຍບໍ່ໃຊ້ພະລັງງານແບັດເຕີຣີ.
- ຕົວກໍານົດການລະບົບ: Provides details on input/output voltage, frequency, and battery charge level.
- ການແຈ້ງເຕືອນ: Notifies of critical events or warnings.
3.3 ອັດຕະໂນມັດ Voltagລະບຽບການ (AVR)
The Boost and Trim AVR feature automatically corrects minor voltage fluctuations (sags and surges) in incoming utility power without switching to battery power. This preserves battery life and ensures a stable power supply to your connected devices.
3.4 Power Outage Response
ໃນລະຫວ່າງການພະລັງງານ outage, the UPS automatically switches to battery power, providing uninterrupted power to devices connected to the battery-protected outlets. Audible alarms will sound to notify you of the power event. The estimated run time will be displayed on the LCD.
3.5 Green Mode and Power-Saving Outlets
The Green Mode optimizes efficiency by bypassing internal components when utility power is stable. Power-saving outlets can be configured to automatically turn off connected devices when the master device (e.g., your computer) is turned off or goes into standby, reducing energy consumption.
4. ບໍາລຸງຮັກສາ
4.1 ການດູແລແລະການທົດແທນຫມໍ້ໄຟ
The UPS features user-replaceable and hot-swappable batteries, allowing for replacement without powering down connected equipment.
- ການທົດສອບດ້ວຍຕົນເອງອັດຕະໂນມັດ: The UPS performs periodic self-tests to assess battery health.
- Battery Failure Notification: The UPS will provide an early warning if the battery needs replacement.
- Disconnected Battery Notification: An alarm will sound if the battery is not properly connected.
- ຂັ້ນຕອນການທົດແທນ: Batteries can be replaced without tools. Refer to the specific battery replacement instructions provided with your replacement battery or on the APC support website. Always use genuine APC replacement batteries.
4.2 ຣີເຊັດຕົວຕັດວົງຈອນ
In case of an overload, the UPS's resettable circuit breaker may trip. Disconnect non-essential equipment, then press the circuit breaker button to reset it.
4.3 ການທໍາຄວາມສະອາດ
Keep the UPS clean and free of dust. Use a dry cloth to wipe the exterior. Do not use liquid cleaners or solvents. Ensure ventilation openings are not obstructed.
5. ການແກ້ໄຂບັນຫາ
This section provides solutions to common issues you might encounter with your APC Back-UPS RS 700 VA.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| UPS ບໍ່ເປີດ. | Not connected to utility power; battery not charged; internal fault. | Ensure power cord is securely plugged into a live outlet. Allow 24 hours for initial battery charge. If still unresponsive, contact support. |
| ສຽງເຕືອນໄພດັງຂຶ້ນເລື້ອຍໆ. | Overload; battery low/faulty; utility power issues. | Reduce connected load. Check LCD for specific alarm codes. Ensure proper ventilation. Perform a self-test. |
| Building Wiring Fault Indicator is lit. | Wiring problem in the wall outlet (e.g., missing ground, reversed polarity). | Do not use the outlet. Consult a qualified electrician to inspect and correct the wiring. |
| ເວລາໃຊ້ງານແບັດເຕີຣີສັ້ນ. | Battery not fully charged; battery nearing end of life; excessive load. | Ensure battery is fully charged. Reduce connected load. Consider replacing the battery if it's old or fails self-test. |
| UPS not providing power during outage. | Devices connected to surge-only outlets; battery disconnected or faulty. | Verify critical devices are connected to battery-protected outlets. Check for disconnected battery notification. Replace battery if faulty. |
6. ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: BR700G
- ຄວາມອາດສາມາດ: 700 VA / 450 W
- ການປ້ອນຂໍ້ມູນ Voltage: 120V AC (Nominal)
- ຜົນໄດ້ຮັບ Voltage: 120V AC (Nominal)
- ການເຊື່ອມຕໍ່ຜົນໄດ້ຮັບ: 3 x NEMA 5-15R (Battery Backup & Surge Protection), 3 x NEMA 5-15R (Surge Protection Only)
- ປັດໄຈແບບຟອມ: ຫໍ
- ນ້ຳໜັກ: ປະມານ 0.01 ອອນສ໌ (Note: This weight is as per provided data. Actual weight for a UPS of this capacity is typically much higher.)
- Ampອາຍຸ: 3 Amps
- ສີ: ສີຂຽວ (Note: The product image shows a black/dark grey unit, but specifications list 'Green'.)
- ວັນທີທໍາອິດທີ່ມີ: ວັນທີ 12 ກັນຍາ 2012
- ຜູ້ຜະລິດ: APC
7. ການຮັບປະກັນ
The APC Back-UPS RS 700 VA Tower UPS (Model BR700G) comes with a ການຮັບປະກັນຂອງຜູ້ຜະລິດ 1 ປີ. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to initiate a warranty claim, please refer to the official APC warranty documentation or contact APC customer support.
8. ສະຫນັບສະຫນູນ
For technical assistance, product information, or to purchase replacement parts and accessories, please contact APC customer support or visit their official webເວັບໄຊ.
- APC ຢ່າງເປັນທາງການ Webເວັບໄຊ: www.apc.com
- ບໍລິການລູກຄ້າ: ອ້າງເຖິງ APC webສະຖານທີ່ສໍາລັບຂໍ້ມູນຕິດຕໍ່ພາກພື້ນ.
