ແນະນຳ
This manual provides essential information for the proper setup, operation, and maintenance of your SINGER Simple 2263 23-Stitch Sewing Machine. Designed for ease of use, this machine offers foundational features for various sewing projects. Please read these instructions carefully before using the machine to ensure safe and efficient operation.
Figure 1: SINGER Simple 2263 23-Stitch Sewing Machine. This image displays the full sewing machine with its main components visible, including the stitch selector, tension dial, and needle area.
ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ
- Always unplug the sewing machine from the electrical outlet immediately after using and before cleaning, removing covers, or performing any user servicing.
- ຢ່າປ່ອຍໃຫ້ເຄື່ອງຫຼິ້ນຖືກໃຊ້ເປັນຂອງຫຼິ້ນ. ຈຳເປັນຕ້ອງເອົາໃຈໃສ່ຢ່າງໃກ້ຊິດເມື່ອໃຊ້ເຄື່ອງນີ້ໂດຍເດັກນ້ອຍ ຫຼື ຢູ່ໃກ້ເດັກນ້ອຍ.
- Use this machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer.
- ຢ່າປະຕິບັດເຄື່ອງຫຍິບນີ້ຢ່າງເດັດຂາດຖ້າມັນມີສາຍເຊືອກຫລືສາຍສຽບທີ່ເສຍຫາຍ, ຖ້າມັນເຮັດວຽກບໍ່ຖືກຕ້ອງ, ຖ້າມັນຖືກຫຼຸດລົງຫລືເສຍຫາຍ, ຫລືຖືກຖິ້ມລົງໃນນໍ້າ.
- ເອົານິ້ວມືຫ່າງຈາກທຸກໆສ່ວນທີ່ເຄື່ອນຍ້າຍ. ຕ້ອງມີການດູແລພິເສດຮອບເຂັມຂັດຂອງເຄື່ອງຫຍິບ.
- ໃຊ້ແຜ່ນເຂັມທີ່ຖືກຕ້ອງສະເໝີ. ແຜ່ນທີ່ບໍ່ຖືກຕ້ອງສາມາດເຮັດໃຫ້ເຂັມແຕກ.
- ຢ່າດຶງ ຫຼື ຍູ້ຜ້າໃນຂະນະທີ່ກຳລັງຫຍິບ. ນີ້ອາດຈະເຮັດໃຫ້ເຂັມຫັນໄປທາງຂ້າງ ແລະ ເຮັດໃຫ້ມັນຫັກ.
- ໃສ່ແວ່ນຕານິລະໄພໃນເວລາເປີດເຄື່ອງ.
ແມ່ນຫຍັງຢູ່ໃນກ່ອງ
ຫຼັງຈາກການຍົກເລີກການຫຸ້ມຫໍ່, ກະລຸນາກວດສອບວ່າທັງຫມົດລາຍການດັ່ງຕໍ່ໄປນີ້ແມ່ນລວມ:
- ຄູ່ມືການສອນ
- ຄູ່ມືເລີ່ມຕົ້ນດ່ວນ
- ແຜ່ນ Darning
- Thread Spool Cap Holders (2)
- ໄຂຄວງ
- ຕີນຈຸດປະສົງທັງຫມົດ
- Buttonhole ຕີນ
- ເກີບສົ້ນຕີນ
- Bobbins (3)
- ເຂັມ (3)
- Lint Brush/Seam Ripper
- Power cord/Foot Control
Figure 2: Included Accessories. This image displays various accessories that come with the sewing machine, including bobbins, needles, different presser feet, and a seam ripper.
ຕັ້ງຄ່າ
1. ການເຊື່ອມຕໍ່ພະລັງງານ
Connect the power cord to the machine and then to a 110-volt electrical outlet. Ensure the foot control is also connected to the machine.
2. ການເກຍເຄື່ອງຈັກ
Proper threading is crucial for optimal stitch quality. Follow these steps:
- Place a spool of thread onto the spool pin. Ensure the thread unwinds smoothly.
Figure 3: Spool Pin. This image shows a close-up of the spool pin located at the top of the machine, where the thread spool is placed.
- Guide the thread through the upper thread guides and tension discs as indicated by the numbered path on the machine.
- Thread the needle from front to back. The automatic needle threader can assist with this step.
Figure 4: Needle Area. This image provides a close-up view of the needle and presser foot area, highlighting the automatic needle threader mechanism.
3. Winding and Inserting the Bobbin
Refer to the Quick Start Guide for detailed instructions on winding the bobbin and correctly inserting it into the bobbin case.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ການເລືອກຮອຍຕໍ່
Turn the stitch selector dial to choose from the 23 available stitch patterns. Ensure the needle is in its highest position before changing stitches.
2. ການປັບຄວາມຍາວ ແລະ ຄວາມກວ້າງຂອງຮອຍຕໍ່
Use the length and width dials to fine-tune your chosen stitch. Experiment with different settings on scrap fabric to achieve the desired result.
3. Using the Presser Foot Lifter
The extra-high presser foot lifter allows for easy placement and removal of multiple layers of fabric or bulky materials under the presser foot.
4. Sewing a Buttonhole
Attach the buttonhole foot. Follow the markings on the foot and the machine's instructions for a four-step buttonhole process.
Figure 5: Buttonhole Stitching. This image shows the buttonhole presser foot attached to the machine, actively stitching a buttonhole on a piece of blue fabric.
ບໍາລຸງຮັກສາ
1. ທໍາຄວາມສະອາດເຄື່ອງ
Regular cleaning helps maintain machine performance. Use the provided lint brush to remove lint and dust from the bobbin area and feed dogs. Always unplug the machine before cleaning.
2. ການທົດແທນເຂັມ
Replace the needle regularly, especially if it becomes bent, dull, or if you notice skipped stitches. Use the screwdriver to loosen the needle clamp screw, insert a new needle with the flat side facing the back, and tighten the screw.
ການແກ້ໄຂບັນຫາ
If you encounter issues, review ບັນຫາທົ່ວໄປດັ່ງຕໍ່ໄປນີ້ແລະການແກ້ໄຂ:
- ຂ້າມ Stitches: Check if the needle is bent or dull, replace if necessary. Ensure the needle is inserted correctly. Verify the machine is threaded properly.
- ຫົວຂໍ້ແຕກ: Check for correct threading, proper thread tension, and ensure the needle is not bent or too small for the thread.
- ການຍັບຍັ້ງຜ້າ: Adjust thread tension, use a finer needle, or consider using a stabilizer for delicate fabrics.
- ເຄື່ອງບໍ່ເລີ່ມ: Ensure the power cord and foot control are securely plugged in. Check the power switch.
For more complex issues, consult the full instruction manual or contact SINGER customer support.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຂະໜາດສິນຄ້າ | 15 x 7 x 12 ນິ້ວ |
| ໝາຍເລກຕົວແບບ | 2263 |
| ນ້ໍາຫນັກລາຍການ | 12.8 ປອນ |
| ຜູ້ຜະລິດ | ນັກຮ້ອງ |
| ວັນທີທໍາອິດທີ່ມີ | ວັນທີ 26 ມິຖຸນາ 2012 |
| ຍີ່ຫໍ້ | SINGER |
| ສີ | ສີຂາວ |
| ວັດສະດຸ | Metal, plastic, electrical components |
| ແຫຼ່ງພະລັງງານ | Treadle Powered |
| ແມ່ນໄຟຟ້າ | ແມ່ນແລ້ວ |
| UPC | 037431882394 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This sewing machine is warranted for use in the US and Canada at 110 volts only. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official SINGER webເວັບໄຊ.
For technical support, replacement parts, or further assistance, please contact SINGER customer service through their official channels.
