ຄູ່ມື+

FAAC TM433DS

FAAC TM2 433DS Remote Control Garage Door Opener User Manual

Model: TM433DS

ແນະນຳ

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your FAAC TM2 433DS Remote Control Garage Door Opener. Please read this manual thoroughly before using the device to ensure proper function and longevity.

ການ​ຕັ້ງ​ຄ່າ​ແລະ​ການ​ດໍາ​ເນີນ​ໂຄງ​ການ​

1. ການຕິດຕັ້ງຫມໍ້ໄຟ

The FAAC TM2 433DS remote control requires two Lithium batteries, which are typically included. To install or replace batteries:

  1. ເປີດຣີໂໝດຄວບຄຸມຢ່າງລະມັດລະວັງasing. This may involve removing a small screw or gently prying open the two halves.
  2. ຊອກຫາຊ່ອງໃສ່ຫມໍ້ໄຟ.
  3. Insert the two Lithium batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. ປິດຣີໂໝດຄວບຄຸມ casing ຢ່າງປອດໄພ.

2. Programming the Remote Control (DIP Switches)

The FAAC TM2 433DS remote control uses DIP switches for programming. To program your new remote, you will need to match the DIP switch settings of an existing, working remote or your garage door opener receiver.

ພາຍໃນ view of FAAC TM2 433DS remote control showing DIP switches and battery compartment.

ພາຍໃນ view of FAAC TM2 433DS remote control. This image displays the internal components of the FAAC TM2 433DS remote control. Visible are the circuit board, the battery compartment, and a set of DIP switches, which are used for programming the remote to your garage door opener.

  1. ເປີດຄasing of your new FAAC TM2 433DS remote control.
  2. Locate the bank of small switches, known as DIP switches, on the circuit board.
  3. If you have an existing, working remote: Open its casing and observe the position of its DIP switches (ON/OFF or 1/0).
  4. If you are programming directly from the receiver: Refer to your garage door opener's manual to locate its DIP switches and note their positions.
  5. Carefully adjust the DIP switches on your new FAAC TM2 433DS remote control to exactly match the settings of the existing remote or receiver. Use a small, non-conductive tool if necessary.
  6. Once the DIP switches are set, close the remote control casing ຢ່າງປອດໄພ.
  7. Test the remote control to ensure it operates your garage door opener correctly.

ໝາຍເຫດ: If your garage door opener does not use DIP switches, or if you encounter difficulties, consult your garage door opener's specific programming instructions or contact a qualified technician.

ຄໍາແນະນໍາການດໍາເນີນງານ

The FAAC TM2 433DS remote control features two buttons for operation.

  • Opening/Closing the Garage Door: Press one of the two buttons on the remote control. The garage door will begin to open or close. Pressing the button again during operation will typically stop the door. A third press will reverse its direction.
  • ຊ່ວງ: The maximum effective range for this remote control is approximately 10 meters. Ensure you are within this range for reliable operation. Obstructions can reduce the effective range.

Ensure there are no obstructions in the path of the garage door before and during operation to prevent damage or injury.

ບໍາລຸງຮັກສາ

ການປ່ຽນແບັດ

If the remote control's range decreases significantly or it stops responding, the batteries may need replacement. Refer to the "Battery Installation" section under Setup for detailed instructions. Always use two new Lithium batteries of the specified type.

ທໍາຄວາມສະອາດ

Clean the remote control's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing or internal components. Avoid exposing the remote to excessive moisture.

ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ການຄວບຄຸມໄລຍະໄກບໍ່ເຮັດວຽກ.
  • ແບດເຕີຣີທີ່ຕາຍແລ້ວຫຼືຕໍ່າ.
  • Incorrect DIP switch settings.
  • ຣີໂໝດຢູ່ນອກຂອບເຂດ.
  • Obstruction blocking signal.
  • Replace batteries (refer to Setup).
  • Verify DIP switch settings match the receiver or existing remote (refer to Setup).
  • ຍ້າຍເຂົ້າໄປໃກ້ເຄື່ອງເປີດປະຕູໂຮງລົດ.
  • ຮັບປະກັນສາຍສາຍຕາທີ່ຊັດເຈນຕໍ່ກັບຜູ້ຮັບ.
ຂອບເຂດປະຕິບັດການຫຼຸດລົງ.
  • ແບັດເຕີຣີຕໍ່າ.
  • ການລົບກວນຈາກອຸປະກອນອື່ນໆ.
  • Physical obstructions.
  • ປ່ຽນແບັດ.
  • Identify and remove sources of interference.
  • ຮັບປະກັນສາຍສາຍຕາທີ່ຊັດເຈນ.
Garage door opens/closes intermittently.
  • ການເຊື່ອມຕໍ່ຫມໍ້ໄຟວ່າງ.
  • ສັນຍານອ່ອນ.
  • Check battery contacts and ensure batteries are seated firmly.
  • ປ່ຽນແບັດ.

If these troubleshooting steps do not resolve the issue, contact customer support or a qualified technician.

ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ

ຍີ່ຫໍ້FAAC
ຊື່ຕົວແບບTM433DS
ໝາຍເລກຕົວແບບTM433DS-2
ຂະໜາດສິນຄ້າ0.7 x 0.5 x 0.2 cm
ນ້ຳໜັກ40 ກຣາມ
ASINB008DRDV1W
Supported Devices Quantity2
ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ປະຕູ Garage
ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ຄວາມຖີ່ວິທະຍຸ
ປະລິມານປຸ່ມ2
ປະເພດການຄວບຄຸມການຄວບຄຸມປຸ່ມ
ຂອບເຂດສູງສຸດ10 ແມັດ
ຕ້ອງໃຊ້ແບັດເຕີຣີ2 Lithium (included)

ຂໍ້ມູນການຮັບປະກັນ

Specific warranty details for the FAAC TM2 433DS remote control may vary by region and retailer. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the documentation provided with your purchase or visit the official FAAC webເວັບໄຊ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your FAAC TM2 433DS remote control, please contact FAAC customer support or your authorized dealer. Contact information can typically be found on the manufacturer's webເວັບໄຊ ຫຼືເອກະສານການຊື້ຂອງທ່ານ.

  • ຊັບພະຍາກອນອອນໄລນ໌: Visit the official FAAC website for FAQs, additional manuals, and support contact details.
  • ຕົວແທນຈຳໜ່າຍທີ່ໄດ້ຮັບອະນຸຍາດ: Your local FAAC dealer can provide expert advice and service.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - TM433DS

ກ່ອນview Handleiding Faac TM2 R Buismotor: Installatie, Programmering en Gebruik
Gedetailleerde handleiding voor de Faac TM2 R buismotor. Ontdek installatie-instructies, elektrische aansluitingen, programmering van afstandsbedieningen en sensoren, en speciale functies voor zonwering en rolluiken.
ກ່ອນview ຄໍາແນະນໍາການເຂົ້າລະຫັດໄລຍະໄກ FAAC: ຄູ່ມືການດໍາເນີນໂຄງການໄລຍະໄກ Master & Slave
ຄູ່​ມື​ທີ່​ສົມ​ບູນ​ແບບ​ກ່ຽວ​ກັບ​ວິ​ທີ​ການ​ລະ​ຫັດ FAAC ຫ່າງ​ໄກ​ສອກ​ຫຼີກ​, ຈໍາ​ແນກ​ລະ​ຫວ່າງ​ຫນ່ວຍ​ບໍ​ລິ​ການ​ແມ່​ບົດ​ແລະ​ສໍາ​ລອງ​. ຮວມເອົາຄຳແນະນຳເທື່ອລະຂັ້ນຕອນສຳລັບການຕັ້ງໂປຣແກຣມຣີໂມດໃໝ່ ແລະການສ້າງຣີໂມດຫຼັກໃໝ່, ພ້ອມກັບຄຳເຕືອນຄວາມປອດໄພຂອງແບັດເຕີຣີທີ່ຈຳເປັນ.
ກ່ອນview FAAC XT2-XT4 868 SLH/SLH LR Transmitter Programming and Operation Guide
Comprehensive guide to programming and operating FAAC XT2 and XT4 868 SLH/SLH LR gate remote transmitters, including master/slave recognition and coding procedures.
ກ່ອນview FAAC Transmitter Coding Guide
Instructions for coding FAAC 868 MHz transmitters, differentiating between master and slave units, and providing a step-by-step guide for programming new transmitters.
ກ່ອນview FAAC XT2-XT4 868 SLH - SLH LR Remote Control Programming Guide
This document provides instructions for programming and using the FAAC XT2-XT4 868 SLH - SLH LR remote control system, including identifying master/slave transmitters, system coding, and transmitter coding.
ກ່ອນview KILO TX 868 JLC Radio Transmitter ຄູ່ມືຜູ້ໃຊ້
ເອກະສານນີ້ໃຫ້ຄໍາແນະນໍາ ແລະຂໍ້ສະເພາະສໍາລັບເຄື່ອງສົ່ງວິທະຍຸ KILO TX 868 JLC ໂດຍ FAAC, ລວມທັງການນໍາໃຊ້ທີ່ຕັ້ງໃຈ, ຂໍ້ຈໍາກັດ, ແລະຂັ້ນຕອນການຈື່ຈໍາ ແລະການຄຸ້ມຄອງການຄວບຄຸມວິທະຍຸ.