Icom IC-F5021 VHF Mobile Radio User Manual

ແນະນຳ

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your Icom IC-F5021 VHF Mobile Radio. Please read this manual thoroughly before using the radio to ensure proper functionality and to prevent damage.

The Icom IC-F5021 is a robust VHF mobile radio designed for reliable communication within the 136-174MHz frequency range, offering 50 watts of transmit power and 128 channel capacity.

ອົງປະກອບລວມ

ເມື່ອແກະກ່ອງອອກແລ້ວ, ໃຫ້ກວດສອບວ່າມີລາຍການຕໍ່ໄປນີ້ທັງໝົດຢູ່ແລ້ວ:

• Icom IC-F5021 Mobile Radio Unit
• ວົງເລັບຕິດຕັ້ງ
• HM-152 Microphone
• ສາຍໄຟ DC 10ft
• ໄມ້ແຂວນໄມໂຄຣໂຟນ
• Miscellaneous Hardware (Screws, etc.)

Figure 1: Icom IC-F5021 VHF Mobile Radio with its included HM-152 microphone. The radio unit features a display, control knob, and programmable buttons (P0-P3), along with up/down navigation buttons and a power button.

ຄໍາແນະນໍາການຕິດຕັ້ງ

1. ການຕິດຕັ້ງວິທະຍຸ

1. Select a secure and accessible location for the radio unit, ensuring adequate ventilation.
2. ໃຊ້ຂາຍຶດທີ່ໃຫ້ມາເປັນແມ່ແບບເພື່ອໝາຍສະຖານທີ່ເຈາະ.
3. Drill pilot holes and secure the mounting bracket using the supplied screws.
4. ຕິດຕັ້ງໜ່ວຍວິທະຍຸເຂົ້າກັບຂາຕັ້ງ.

2. ການເຊື່ອມຕໍ່ພະລັງງານ

1. Connect the 10ft DC power cable to the radio's power input.
2. Connect the red wire to the positive (+) terminal of a 12V DC power source (e.g., vehicle battery) and the black wire to the negative (-) terminal. Ensure proper polarity to prevent damage.
3. It is recommended to connect directly to the battery terminals to minimize voltage drop and interference.

3. Microphone and Antenna Connection

• Plug the HM-152 microphone into the designated microphone jack on the front panel of the radio.
• Install the microphone hanger in a convenient location.
• Connect a suitable VHF antenna (not included) to the antenna connector on the rear of the radio. Ensure the antenna is properly tuned for the operating frequency range.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ / ປິດພະລັງງານ

• ເພື່ອເປີດວິທະຍຸ, ກົດປຸ່ມຄ້າງໄວ້ ປຸ່ມເປີດປິດ (usually marked with a circle and vertical line) until the display illuminates.
• ເພື່ອປິດໄຟ, ກົດປຸ່ມແລະກົດປຸ່ມ ປຸ່ມເປີດປິດ ອີກເທື່ອຫນຶ່ງຈົນກ່ວາຈໍສະແດງຜົນປິດ.

2. ການປັບລະດັບສຽງ

ໝຸນ ປຸ່ມປະລິມານ (typically the leftmost knob on the front panel) clockwise to increase volume and counter-clockwise to decrease it.

3. ການເລືອກຊ່ອງ

• ໃຊ້ ຂຶ້ນ (▲) ແລະ ລົງ (▼) arrow buttons to cycle through the available channels.
• The radio comes with 5 channels pre-programmed. Additional channels can be programmed by a qualified technician.

4. ການ​ສົ່ງ​ແລະ​ການ​ຮັບ​

• ເພື່ອສົ່ງ, ໃຫ້ກົດຄ້າງໄວ້ ປຸ່ມ Push-To-Talk (PTT) on the side of the microphone. Speak clearly into the microphone.
• ປ່ອຍປຸ່ມ PTT ເພື່ອກັບຄືນສູ່ໂໝດຮັບ.
• Ensure the channel is clear before transmitting.

5. Programmable Buttons (P0-P3)

The buttons labeled P0, P1, P2, and P3 are programmable and can be assigned various functions by a qualified technician, such as scan, monitor, or high/low power selection. Refer to your dealer for specific programming details.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າອ່ອນໆແຫ້ງເພື່ອທຳຄວາມສະອາດພາຍນອກຂອງວິທະຍຸ. ຢ່າໃຊ້ສານເຄມີ ຫຼື ຕົວລະລາຍທີ່ຮຸນແຮງ.
• ການເຊື່ອມຕໍ່: Periodically check all cable connections (power, antenna, microphone) for security and signs of wear.
• ສະພາບແວດລ້ອມ: Avoid exposing the radio to extreme temperatures, direct sunlight for prolonged periods, or excessive dust and moisture. The radio is not water resistant.

ການແກ້ໄຂບັນຫາ

If problems persist after attempting these solutions, contact your authorized Icom dealer for assistance.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The Icom IC-F5021 Mobile Radio comes with a ຮັບປະກັນໂຮງງານ 2 ປີ on the radio unit and a ຮັບປະກັນໂຮງງານ 1 ປີ on accessories. For warranty claims or technical support, please contact your authorized Icom dealer or visit the official Icom webເວັບໄຊ.

ນອກນັ້ນທ່ານຍັງສາມາດໄປຢ້ຽມຢາມໄດ້ ຮ້ານ ICOM ໃນ Amazon ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມຜະລິດຕະພັນແລະຊັບພະຍາກອນສະຫນັບສະຫນູນ.