Eiko H1155 H11 Series ຄູ່ມືແນະ ນຳ ການປ່ຽນຫລອດໄຟ Halogen

ແນະນຳ

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.

ຂໍ້ມູນຄວາມປອດໄພ

• ຄຳເຕືອນ: Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
• ຂໍ້ຄວນລະວັງ: ຫລອດໄຟຮາໂລເຈນເຮັດວຽກໃນອຸນຫະພູມສູງ. ປ່ອຍໃຫ້ຫລອດໄຟເຢັນລົງໝົດກ່ອນຈັບຕ້ອງ.
• ຂໍ້ຄວນລະວັງ: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use clean gloves or a clean cloth.
• ຄຳເຕືອນ: ຖິ້ມຫລອດໄຟເກົ່າຢ່າງມີຄວາມຮັບຜິດຊອບຕາມລະບຽບການທ້ອງຖິ່ນ.

ສິນຄ້າເກີນview

The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.

ຮູບທີ 1: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

1. ການກະກຽມ: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
2. ເຂົ້າເຖິງຫລອດໄຟ: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
3. ຕັດການເຊື່ອມຕໍ່ສາຍໄຟ: ລະມັດລະວັງຕັດຕົວເຊື່ອມຕໍ່ໄຟຟ້າຈາກດ້ານຫຼັງຂອງຫລອດໄຟເກົ່າ.
4. ເອົາດອກໄຟເກົ່າອອກ: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
5. ຕິດຕັ້ງດອກໄຟໃໝ່: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. Do not touch the glass bulb with bare hands.
6. ເຊື່ອມຕໍ່ສາຍໄຟຄືນໃໝ່: ເຊື່ອມຕໍ່ຕົວເຊື່ອມຕໍ່ໄຟຟ້າກັບຫລອດໄຟໃໝ່.
7. ການ​ທໍາ​ງານ​ຂອງ​ການ​ທົດ​ສອບ​: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
8. ປະກອບຄືນໃໝ່: Reinstall any covers or components that were removed to access the bulb.

ໝາຍເຫດ: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.

ການດໍາເນີນງານ

The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: If the headlight lens becomes dirty, clean it with a soft cloth and appropriate automotive cleaning solution. Avoid abrasive cleaners.
• ການກວດກາ: Periodically check your headlights for proper function. If a bulb appears dim or has failed, replace it promptly.
• ການຈັດການ: When replacing bulbs, always handle them by the base to avoid contaminating the glass.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: EIkO Auto Lighting