1. ບົດແນະນຳ
This manual provides essential information for the safe and efficient use of your Smeg Classic PGF96 87cm Gas Cooktop. Please read these instructions carefully before installation and use, and keep them for future reference. This cooktop features 6 gas burners, automatic ignition, and durable cast iron pan supports, all within a sleek stainless steel design.
Image: The Smeg Classic PGF96 gas cooktop, showcasing its six burners with active flames, set into a dark countertop.
2. ຂໍ້ມູນຄວາມປອດໄພ
ສຳຄັນ: Gas appliances require careful handling. Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the gas supplier.
- Ensure adequate ventilation in the kitchen.
- ຫ້າມເກັບມ້ຽນວັດຖຸທີ່ຕິດໄຟຢູ່ໃກ້ກັບເຕົາອົບ.
- ໃຫ້ເດັກຢູ່ຫ່າງຈາກເຄື່ອງໃຊ້ໃນເວລາເຮັດວຽກ.
- ຢ່າປ່ອຍໃຫ້ການແຕ່ງກິນໂດຍບໍ່ໄດ້ເອົາໃຈໃສ່.
- If you smell gas, immediately turn off the gas supply, open windows, and do not operate any electrical switches. Contact your gas supplier.
- Use only stable cookware appropriate for the burner size.
3. ການຕິດຕັ້ງ
Installation of this appliance must be carried out by a qualified technician in accordance with local regulations and standards. Incorrect installation can void the warranty and pose safety risks.
- Ensure the countertop opening dimensions match the cooktop's requirements (refer to specifications).
- Verify that the gas supply pressure is compatible with the appliance.
- Connect the cooktop to the gas supply using approved flexible or rigid piping.
- Check all gas connections for leaks using a soapy water solution.
- Ensure proper electrical grounding for the automatic ignition system.
Image: A top-down perspective of the Smeg Classic PGF96 gas cooktop, showing the layout of its six burners and control knobs when not in use.
4. ຕັ້ງຄ່າ
After professional installation, perform these initial checks:
- Remove all packaging materials and protective films from the cooktop surface and pan supports.
- ເຮັດຄວາມສະອາດພື້ນຜິວ cooktop ດ້ວຍການໂຄສະນາamp ຜ້າແລະຢາຊັກຜ້າອ່ອນໆ.
- Place the cast iron pan supports securely over their respective burners.
- Ensure all control knobs are in the 'OFF' position.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
Your Smeg PGF96 cooktop features automatic electronic ignition for ease of use.
ຮູບພາບ: A close-up view of the Smeg Classic PGF96 gas cooktop, highlighting the stainless steel surface and the precise control knobs.
ການເຜົາໄຫມ້ Burner ໄດ້:
- Push down the control knob for the desired burner.
- While holding it down, turn the knob counter-clockwise to the maximum flame setting (large flame symbol).
- The automatic igniter will click, and the burner will light.
- Continue to hold the knob down for a few seconds after ignition to allow the thermocouple to heat up and activate the flame failure device.
- ປ່ອຍລູກບິດ. ຖ້າແປວໄຟອອກໄປ, ເຮັດຊ້ໍາຂະບວນການ.
- ປັບຂະໜາດແປວໄຟໂດຍການໝຸນປຸ່ມລະຫວ່າງການຕັ້ງຄ່າແປວໄຟສູງສຸດ ແລະ ຕໍ່າສຸດ.
To Turn Off a Burner:
Turn the control knob clockwise until it clicks into the 'OFF' position (dot symbol).
6. ການທໍາຄວາມສະອາດແລະບໍາລຸງຮັກສາ
ການທຳຄວາມສະອາດ ແລະ ການບຳລຸງຮັກສາເປັນປະຈຳຈະຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງເຕົາແກັສຂອງທ່ານ.
Cooktop Surface (Stainless Steel):
- ປ່ອຍໃຫ້ເຕົາອົບເຢັນຢ່າງສົມບູນກ່ອນທີ່ຈະເຮັດຄວາມສະອາດ.
- Use a soft cloth or sponge with warm soapy water.
- For stubborn stains, use a non-abrasive stainless steel cleaner. Always wipe in the direction of the grain.
- Rinse thoroughly and dry with a soft, clean cloth to prevent water spots.
Cast Iron Pan Supports:
- Remove the pan supports from the cooktop.
- Wash them in warm soapy water. For baked-on food, soak them before scrubbing.
- Dry thoroughly before placing them back on the cooktop to prevent rust.
Burner Caps and Rings:
- Remove burner caps and rings when cool.
- Clean with warm soapy water and a non-abrasive brush.
- Ensure burner ports are clear of food debris. Use a fine wire or needle if necessary.
- ເຊັດໃຫ້ແຫ້ງສະນິດກ່ອນທີ່ຈະປະກອບຄືນ. ການປະກອບຄືນທີ່ບໍ່ຖືກຕ້ອງສາມາດສົ່ງຜົນກະທົບຕໍ່ຄຸນນະພາບແປວໄຟ.
7. ການແກ້ໄຂບັນຫາ
ກ່ອນທີ່ຈະຕິດຕໍ່ບໍລິການ, ໃຫ້ກວດເບິ່ງບັນຫາທົ່ວໄປຕໍ່ໄປນີ້:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຕົາໄຟບໍ່ລອກ | No gas supply; Igniter electrode dirty; Burner cap/ring incorrectly placed; Power outage. | Check gas valve; Clean electrode; Realign burner parts; Check power supply. |
| ແປວໄຟບໍ່ສະໝໍ່າສະເໝີ ຫຼື ເປັນສີເຫຼືອງ | Burner ports clogged; Incorrect gas type/pressure; Air mixture incorrect. | Clean burner ports; Contact a qualified technician to check gas supply/adjust air mixture. |
| ກິ່ນອາຍແກັສ | ແກັດຮົ່ວ. | Immediately turn off gas supply, ventilate area, do not use electrical switches, contact gas supplier. |
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຊື່ຍີ່ຫໍ້ | Smeg |
| ຕົວແບບ | PGF96 |
| ຈໍານວນຂອງອົງປະກອບຄວາມຮ້ອນ | 6 |
| ສີ | ສະແຕນເລດ |
| ແຫຼ່ງພະລັງງານ | Gas Operated |
| ປະເພດນໍ້າມັນເຊື້ອໄຟ | ອາຍແກັສ |
| ຄຸນນະສົມບັດພິເສດ | 6 Burners, Automatic Electronic Ignition, Very Low Profile Stainless Steel Base, Heavy-Duty Cast Iron Pan Supports |
| ວັດສະດຸພື້ນຜິວເຄື່ອງເຮັດຄວາມຮ້ອນ | ສະແຕນເລດ |
| ວັດສະດຸ | ສະແຕນເລດ |
| ປະເພດລະບົບໄຟໄຫມ້ | ເອເລັກໂຕຣນິກ |
| ຂະໜາດ (H x W x D) | 79mm x 867mm x 512mm |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, service, or spare parts, please contact Smeg customer service or an authorized service center. Always provide the model number (PGF96) and serial number of your appliance when seeking assistance.
You can find more information on the official Smeg webເວັບໄຊ: www.smeg.com