VOLTCRAFT Energie Logger 4000 F Instruction Manual

1. ບົດແນະນຳ

The VOLTCRAFT Energie Logger 4000 F is a sophisticated device designed to measure and record electricity consumption. It allows users to monitor power usage for up to six months on its internal memory. Data can be easily transferred to a computer via an SDHC card (not included) for detailed analysis and storage. This enables identification of high-consumption appliances and supports efficient energy-saving measures. The device provides highly accurate readings, even for standby consumption, starting from 0.1 Watt.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

• Read this manual thoroughly before operating the device.
• Ensure the device is used only with compatible power outlets and within specified voltage/current limits.
• ຢ່າເປີດອຸປະກອນ casing, except for battery replacement as instructed.
• ຮັກສາອຸປະກອນໃຫ້ຫ່າງຈາກນ້ໍາ, ຄວາມຊຸ່ມຊື່ນ, ແລະອຸນຫະພູມທີ່ສຸດ.
• ຢ່າໃຊ້ອຸປະກອນຖ້າມັນປະກົດວ່າເສຍຫາຍ.
• ຖິ້ມແບດເຕີລີ່ແລະອຸປະກອນຕາມກົດລະບຽບທ້ອງຖິ່ນ.

3. ເນື້ອໃນຊຸດ

• VOLTCRAFT Energie Logger 4000 F
• ຄູ່ມືການສອນ
• Note: An SDHC card is required for data transfer and is not included.

4. ຜະລິດຕະພັນເກີນview

The Energie Logger 4000 F features a clear 3-line display and intuitive controls for monitoring energy parameters. It integrates directly into a power outlet, allowing for easy connection of appliances.

ຮູບທີ 1: ດ້ານໜ້າ view of the VOLTCRAFT Energie Logger 4000 F, showing the integrated socket, the digital display, and control buttons. The display typically shows real-time measurements such as voltage (V), current (A), and frequency (Hz).

4.1 ຈໍສະແດງຜົນ

The 3-line display shows various electrical parameters, including:

• ການບໍລິໂພກພະລັງງານໃນປະຈຸບັນ
• Apparent and effective power
• CosPhi factor
• Intensity (current)
• ສະບັບtage
• ຄວາມຖີ່
• Minimum and maximum values recorded

4.2 ການຄວບຄຸມ

The device features buttons for navigation and mode selection:

• ແບບ: To switch between different display modes and settings.
• MAX / MIN: ເຖິງ view recorded maximum and minimum values.
• ປຸ່ມລູກສອນ: For navigating menus or adjusting settings.

5. ຕັ້ງຄ່າ

5.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

The device includes an integrated backup battery (3V CR1620) to retain measured data during power outages. To access the battery compartment, you may need a precision screwdriver to remove small screws. Ensure correct polarity when inserting the battery.

5.2 SDHC Card Insertion

For data logging and transfer, an SDHC card (not supplied) is required. Locate the SDHC card slot on the device and insert the card gently until it clicks into place. Ensure the card is inserted in the correct orientation.

5.3 ການເຊື່ອມຕໍ່ເບື້ອງຕົ້ນ

1. Plug the Energie Logger 4000 F into a standard wall socket.
2. Connect the appliance you wish to monitor into the socket on the Energie Logger.
3. The display will illuminate, showing initial readings.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1 Monitoring Energy Consumption

Once connected, the device automatically begins monitoring the power consumption of the attached appliance. The 3-line display provides real-time data.

6.2 ຮູບແບບການສະແດງ

ກົດ ໂໝດ button to cycle through different display screens. These screens may include:

• ການວັດແທກຕາມເວລາຈິງ: Shows instantaneous values for voltage, ປະຈຸບັນ, ພະລັງງານ, ແລະອື່ນໆ.
• Cumulative Measurement: Displays total energy consumed over time.
• Cost Forecast: Provides estimated monthly or yearly costs based on current consumption patterns.
• Min/Max Values: Shows the lowest and highest recorded values for various parameters.

6.3 Viewໃນ​ຂໍ້​ມູນ​ປະ​ຫວັດ​ສາດ​

The device can display the consumption and daily expenses for the past 9 days directly on its screen. Use the arrow buttons to navigate through these historical records.

6.4 Determining Operating Time

The Energie Logger 4000 F also tracks and displays the total operating duration of the connected appliance.

6.5 Measuring Standby Consumption

With its high accuracy down to 0.1 Watt, the device is ideal for precisely measuring the low power consumption of appliances in standby mode.

7. Data Transfer and Analysis

The Energie Logger 4000 F stores consumption data for up to six months internally. To access this data for detailed analysis:

1. Ensure an SDHC card is inserted into the device.
2. Follow the on-screen prompts or refer to the device's menu to initiate data transfer to the SDHC card.
3. Safely remove the SDHC card from the Energie Logger.
4. Insert the SDHC card into a computer's card reader.
5. Use compatible software (often provided by VOLTCRAFT or available for download) to view, analyze, and store the collected data. This software typically allows for graphical representation and export of data.

8. ບໍາລຸງຮັກສາ

8.1 ການທໍາຄວາມສະອາດ

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is unplugged before cleaning.

8.2 ການເກັບຮັກສາ

Store the Energie Logger in a cool, dry place, away from direct sunlight and extreme temperatures, when not in use for extended periods.

8.3 ການທົດແທນຫມໍ້ໄຟ

If the backup battery (CR1620) needs replacement, follow the instructions in Section 5.1. A depleted backup battery may result in loss of stored data during power interruptions.

9. ການແກ້ໄຂບັນຫາ

• ບໍ່ມີການສະແດງຜົນ: Check if the device is properly plugged into a live power outlet.
• No Readings: Ensure the appliance is correctly connected to the logger and is powered on.
• Data Loss During Power Outage: Verify that the internal backup battery (CR1620) is correctly installed and has sufficient charge.
• SDHC Card Not Recognized: Ensure the SDHC card is inserted correctly and is formatted to a compatible file system (e.g., FAT32). Try a different SDHC card if issues persist.
• ການອ່ານທີ່ບໍ່ຖືກຕ້ອງ: Ensure the device is used within its specified operating parameters.

10. ຂໍ້ມູນຈໍາເພາະ

11. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official VOLTCRAFT webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.