Klipsch R-5650-S II In-Wall Speaker User Manual

1. ບົດແນະນຳ

ຂອບໃຈສໍາລັບການຊື້asing the Klipsch R-5650-S II In-Wall Speaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read these instructions thoroughly before beginning installation or use to ensure optimal performance and safety.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• Dual 1-inch (2.54cm) Titanium diaphragm compression driver mated to a pivoting 90° x 90° square Tractrix Horn.
• 6.5-inch Cerametallic cone woofer for robust bass response.
• Two vertically stacked Tractrix Horn-loaded tweeters designed to enhance surround sound effects.
• Horn-loaded technology engineered to increase acoustic output and reduce distortion.
• IR receiver knock out for integration with remote control systems.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

Always observe the following safety precautions to prevent damage to the speaker or injury to yourself:

• ອ່ານຄໍາແນະນໍາ: ຄໍາແນະນໍາດ້ານຄວາມປອດໄພແລະການປະຕິບັດງານທັງຫມົດຄວນໄດ້ຮັບການອ່ານກ່ອນທີ່ຜະລິດຕະພັນຈະດໍາເນີນການ.
• ຮັກສາຄໍາແນະນໍາ: ຄໍາແນະນໍາດ້ານຄວາມປອດໄພແລະການດໍາເນີນງານຄວນໄດ້ຮັບການເກັບຮັກສາໄວ້ສໍາລັບການອ້າງອີງໃນອະນາຄົດ.
• ຄຳເຕືອນໃຫ້ລະວັງ: ຄໍາເຕືອນທັງຫມົດກ່ຽວກັບຜະລິດຕະພັນແລະໃນຄໍາແນະນໍາການດໍາເນີນງານຄວນໄດ້ຮັບການປະຕິບັດຕາມ.
• ການຕິດຕັ້ງ: Installation should only be performed by qualified personnel. Ensure the mounting surface can support the speaker's weight.
• ສາຍໄຟ: Ensure all wiring is correctly connected and insulated to prevent short circuits or electrical hazards. Turn off power to the amplifier ກ່ອນທີ່ຈະສ້າງການເຊື່ອມຕໍ່.
• ຄວາມຊຸ່ມ: This speaker is not waterproof. Do not expose it to water or excessive moisture.
• ທໍາຄວາມສະອາດ: Unplug the product from the amplifier before cleaning. Use a dry cloth only.

3. ເນື້ອໃນຊຸດ

The Klipsch R-5650-S II In-Wall Speaker package typically includes:

• One (1) Klipsch R-5650-S II In-Wall Speaker
• Installation Template (usually printed on the packaging)

Note: Additional tools and wiring are required for installation and are not included.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Proper installation is crucial for optimal sound performance and speaker longevity. Consult a professional installer if you are unsure about any steps.

4.1 ການວາງແຜນການຈັດວາງລໍາໂພງ

For surround sound applications, position the R-5650-S II speakers on the side or rear walls, typically at or slightly above ear level when seated. The unique horn array allows for flexible placement while maintaining an enveloping sound field.

4.2 ການກະກຽມຝາຜະໜັງ

1. ຊອກຫາ Studs: Use a stud finder to locate wall studs and avoid them when choosing your mounting location. Ensure there are no electrical wires or plumbing in the desired area.
2. Trace Cutout: Use the provided cutout template to trace the opening on the wall.
3. ຕັດ​ເປີດ​: Carefully cut the opening in the drywall using a drywall saw.

4.3 ການເຊື່ອມຕໍ່ສາຍໄຟ

ກ່ອນທີ່ຈະເຮັດການເຊື່ອມຕໍ່ໃດໆ, ໃຫ້ແນ່ໃຈວ່າຂອງທ່ານ amplifier ຫຼືຕົວຮັບຖືກປິດແລະຖອດປລັກອອກຈາກປລັກສຽບໄຟ.

1. Run speaker wire (minimum 16-gauge, heavier for longer runs) from your amplifier to the wall opening.
2. Strip approximately 1/2 inch (12mm) of insulation from the ends of the speaker wires.
3. ເຊື່ອມຕໍ່ຂົ້ວບວກ (+) ຂອງລໍາໂພງກັບ terminal ບວກ (+) ຂອງ amplifier. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the amplifier. Ensure correct polarity for all speakers in your system.

ຮູບທີ 1: ພາຍໃນ view of the Klipsch R-5650-S II In-Wall Speaker, showing the woofer, dual tweeters, and crossover components.

4.4 ການຕິດຕັ້ງລໍາໂພງ

1. Carefully insert the speaker into the wall opening.
2. Tighten the dog-leg mounting clamps (usually by turning screws on the front baffle) until the speaker is securely fastened to the wall. Do not overtighten.
3. Attach the magnetic grille to the speaker baffle. The grille is designed to snap into place.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once installed and connected, your Klipsch R-5650-S II In-Wall Speaker is ready for use.

1. ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພ.
2. ສຽບ​ໃນ​ແລະ​ພະ​ລັງ​ງານ​ຂອງ​ທ່ານ​ amplifier ຫຼືຜູ້ຮັບ.
3. ເລືອກແຫຼ່ງອິນພຸດທີ່ເໝາະສົມໃນອຸປະກອນຂອງທ່ານ ampມີຊີວິດຊີວາ.
4. Start playback at a low volume and gradually increase it to your desired listening level.

The pivoting Tractrix Horn allows you to direct the high-frequency sound towards the primary listening area for optimized sound imaging.

6. ບໍາລຸງຮັກສາ

Your Klipsch R-5650-S II In-Wall Speaker requires minimal maintenance.

• ທໍາຄວາມສະອາດ: Use a soft, dry cloth to gently wipe the speaker grille and frame. Avoid using abrasive cleaners, solvents, or excessive moisture.
• Grille Care: The magnetic grille can be removed for cleaning if necessary. Handle with care to avoid bending or damaging it.
• ການກວດກາ: ກວດເບິ່ງການເຊື່ອມຕໍ່ສາຍຂອງລຳໂພງເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນຈະປອດໄພ.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your speaker, refer to the following common troubleshooting steps:

8. ຂໍ້ມູນຈໍາເພາະ

9. ຂໍ້ມູນການຮັບປະກັນ

The Klipsch R-5650-S II In-Wall Speaker comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Klipsch website or the warranty card included with your purchase. Keep your proof of purchase for warranty claims.

10. ສະຫນັບສະຫນູນ

ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ສະຫນັບສະຫນູນດ້ານວິຊາການ, ຫຼືເພື່ອ view additional product information, please visit the official Klipsch webເວັບໄຊ:

www.klipsch.com