ECHO GT-225 2 Cycle 21.2cc Curved Shaft Gas Trimmer

ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

Operating power equipment requires adherence to strict safety guidelines to prevent injury. Always read and understand the entire manual before operating the trimmer.

• Always wear eye protection and sturdy shoes.
• ຮັກສາຜູ້ຢືນຢູ່ໃນໄລຍະທີ່ປອດໄພ.
• ຢ່າປະຕິບັດຫນ້າດິນທີ່ປຽກຫຼືປຽກ.
• Always turn off the trimmer and allow the engine to cool before refueling.
• Never carry the trimmer with the engine running.
• ປະຕິບັດຕາມຄໍາແນະນໍາຂອງຜູ້ຜະລິດສະເຫມີສໍາລັບການດໍາເນີນງານທີ່ປອດໄພ.

ສິນຄ້າເກີນview

The ECHO GT-225 is a 2-cycle, 21.2cc gas-powered string trimmer designed for efficient lawn and garden maintenance. It features a curved shaft for maneuverability and an easy-to-use design.

ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• 21.2cc professional-grade, 2-stroke engine for reliable power.
• 48-inch curved shaft with flex cable drive for comfortable operation.
• i-30 starting system designed to reduce starting effort by 30%.
• 14.9 fl oz capacity see-through fuel tank for easy fuel level monitoring.
• Equipped with a 2-line Rapid-Loader™ trimmer head for quick line changes.
• Lightweight design at approximately 10 pounds for reduced user fatigue.
• ແຜ່ນຕັດຂະໜາດ 16 ນິ້ວ ເພື່ອການຕັດທີ່ມີປະສິດທິພາບ.

ຮູບ 1: ເຕັມ view of the ECHO GT-225 Curved Shaft Gas Trimmer.

Figure 2: Labeled diagram highlighting key features such as the engine, shaft, fuel tank, and trimmer head.

Figure 3: Close-up of the ergonomic handle and integrated controls, including the throttle and stop switch.

ຮູບທີ 4: View of the 21.2cc engine and the translucent fuel tank, allowing for easy fuel level checks.

Figure 5: Top-down perspective of the engine, showing the air filter cover and starter mechanism.

Figure 6: Close-up of the trimmer head with the protective guard, designed for user safety and debris deflection.

ການຕິດຕັ້ງແລະການປະກອບ

The ECHO GT-225 may require minor assembly before first use. Follow these steps to prepare your trimmer for operation:

1. ການຫຸ້ມຫໍ່: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ. ກວດ​ສອບ​ວ່າ​ທຸກ​ພາກ​ສ່ວນ​ທີ່​ລະ​ບຸ​ໄວ້​ໃນ​ບັນ​ຊີ​ລາຍ​ການ​ຫຸ້ມ​ຫໍ່​ແມ່ນ​ມີ​ຢູ່​.
2. Handle Assembly: Attach the auxiliary handle to the shaft at a comfortable operating position. Ensure it is securely tightened.
3. ການຕິດຕັ້ງກອງ: Mount the debris shield/guard over the trimmer head according to the instructions. This guard is crucial for operator safety.
4. ການ​ກະ​ກຽມ​ນໍ້າ​ມັນ​ເຊື້ອ​ໄຟ​: The GT-225 uses a 2-cycle engine. Mix fresh unleaded gasoline with a high-quality 2-cycle engine oil at the ratio specified in your engine manual (typically 50:1). Do not use E85 fuel.
5. ນໍ້າມັນເຊື້ອໄຟ: Fill the fuel tank with the prepared fuel mixture. Ensure the fuel cap is securely fastened.
6. ເສັ້ນ Trimmer: Ensure the trimmer head is loaded with the appropriate pre-cut trimmer line. Refer to the maintenance section for detailed line replacement instructions.

ຄໍາແນະນໍາການດໍາເນີນງານ

Starting the Engine (Cold Start)

1. ວາງເຄື່ອງຕັດຫຍ້າໄວ້ເທິງພື້ນຜິວທີ່ຮາບພຽງ ແລະ ໝັ້ນຄົງ.
2. Move the choke lever to the 'COLD START' position.
3. ກົດປຸ່ມ primer bulb ຫຼາຍຄັ້ງຈົນກ່ວານໍ້າມັນເຊື້ອໄຟຈະເຫັນໄດ້ໃນເສັ້ນກັບຄືນ.
4. ດຶງເຊືອກ starter ໃຫ້ແຫນ້ນແລະກ້ຽງຈົນກ່ວາເຄື່ອງຈັກພະຍາຍາມເລີ່ມຕົ້ນ (ປົກກະຕິແລ້ວ 1-2 ດຶງ).
5. Once the engine 'coughs' or attempts to start, move the choke lever to the 'RUN' position.
6. ດຶງເຊືອກສະຕາດອີກຄັ້ງຈົນກວ່າເຄື່ອງຈັກຈະສະຕາດ ແລະ ແລ່ນໄດ້ຢ່າງລຽບງ່າຍ.
7. ປ່ອຍໃຫ້ເຄື່ອງຈັກອຸ່ນຂຶ້ນສອງສາມນາທີກ່ອນທີ່ຈະກົດປຸ່ມຄັນເລັ່ງ.

ການນໍາໃຊ້ Trimmer ໄດ້

• ຖື trimmer ແຫນ້ນດ້ວຍມືທັງສອງ, ຮັກສາທ່າທີ່ສົມດູນ.
• ຮັກສາຫົວ trimmer ໃຫ້ຂະຫນານກັບພື້ນດິນເພື່ອຕັດອອກ.
• Maintain a safe distance from objects, people, and animals.
• Avoid hitting hard surfaces, rocks, or metal objects with the trimmer line, as this can cause line breakage and potential damage.
• To feed more line, gently tap the trimmer head on the ground while the engine is running at full throttle. The Rapid-Loader™ head will automatically advance the line.

ການຢຸດເຊົາເຄື່ອງຈັກ

• ປ່ອຍເກຍຄັນຄັນ.
• Press the engine stop switch to the 'OFF' position.

ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and extends the life of your ECHO GT-225 trimmer.

ນ້ຳມັນເຊື້ອໄຟ ແລະ ນ້ຳມັນ

• Always use fresh, properly mixed 2-cycle fuel. Stale fuel can cause starting issues and engine damage.
• ເກັບຮັກສານໍ້າມັນເຊື້ອໄຟໄວ້ໃນຖັງທີ່ໄດ້ຮັບອະນຸມັດໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ.

ການປ່ຽນສາຍຕັດຫຍ້າ

The GT-225 uses a Rapid-Loader™ head designed for pre-cut line segments. This system simplifies line replacement compared to traditional spool winding.

1. ໃຫ້ແນ່ໃຈວ່າເຄື່ອງຈັກປິດແລະເຢັນ.
2. Locate the two holes on the trimmer head where the line exits.
3. Pull out any remaining short pieces of trimmer line.
4. Insert new pre-cut line segments (typically 9-10 inches long) into the holes until they are securely seated.
5. Use high-quality trimmer line for best performance and durability.

ທໍາຄວາມສະອາດ

• After each use, clean debris from the trimmer head, guard, and engine cooling fins.
• Periodically clean or replace the air filter to ensure proper engine breathing.

ການເກັບຮັກສາ

• For long-term storage, drain the fuel tank and run the engine until it stops to clear the carburetor.
• Store the trimmer in a clean, dry place, away from direct sunlight and extreme temperatures.

ການແກ້ໄຂບັນຫາ

This section provides solutions to common operational issues. For problems not listed here, consult an authorized service center.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສຳລັບລາຍລະອຽດການຮັບປະກັນສະເພາະ, ກະລຸນາອ້າງອີງບັດຮັບປະກັນທີ່ມາພ້ອມກັບຜະລິດຕະພັນຂອງທ່ານ ຫຼື ເຂົ້າເບິ່ງເວັບໄຊທ໌ທາງການຂອງ ECHO webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

If you require technical assistance, replacement parts, or service, please contact ECHO customer support or an authorized ECHO service dealer. Contact information can typically be found on the ECHO webເວັບໄຊທ໌ຫຼືໃນເອກະສານຜະລິດຕະພັນຂອງທ່ານ.