1. ບົດແນະນຳ
ຂອບໃຈສໍາລັບການຊື້asing the Sharp SPC106X LED Alarm Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new alarm clock. Please read these instructions thoroughly before using the device.
The Sharp SPC106X features a clear 1.0" blue LED display, an ultra-thin design, and essential alarm functions including snooze. It is designed for indoor use and operates electrically with battery backup capability.
2. ຂໍ້ມູນຄວາມປອດໄພ
- ແຫຼ່ງພະລັງງານ: ໃຊ້ພຽງແຕ່ອະແດັບເຕີພະລັງງານທີ່ລະບຸໄວ້. ຮັບປະກັນ voltage ເຂົ້າກັນໄດ້ກັບການສະໜອງພະລັງງານໃນທ້ອງຖິ່ນຂອງທ່ານ.
- ນ້ໍາແລະຄວາມຊຸ່ມ: ຢ່າເຮັດໃຫ້ເຄື່ອງຖືກຝົນ, ຄວາມຊຸ່ມຊື່ນ, ຫຼືຂອງແຫຼວທີ່ຕົກ/ກະແຈກກະຈາຍ. ຫ້າມວາງສິ່ງຂອງທີ່ເຕັມໄປດ້ວຍຂອງແຫຼວ, ເຊັ່ນ vases, ໃສ່ເຄື່ອງ.
- ການລະບາຍອາກາດ: ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມ. ຫ້າມປິດຊ່ອງລະບາຍອາກາດ.
- ຄວາມຮ້ອນ: ຮັກສາເຄື່ອງໃຫ້ຫ່າງຈາກແຫຼ່ງຄວາມຮ້ອນເຊັ່ນ: radiators, ເຄື່ອງບັນທຶກຄວາມຮ້ອນ, ເຕົາ, ຫຼືອຸປະກອນອື່ນໆ (ລວມທັງ. amplifiers) ທີ່ຜະລິດຄວາມຮ້ອນ.
- ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດດ້ວຍຜ້າແຫ້ງເທົ່ານັ້ນ.
- ແບັດເຕີຣີ: If using backup batteries, ensure they are inserted with correct polarity. Remove batteries if the unit is not used for an extended period.
3. ເນື້ອໃນຊຸດ
- Sharp SPC106X LED Alarm Clock Unit
- Power Adapter (attached)
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
Note: Batteries are not included and must be purchased separately for backup functionality.
4. ຜະລິດຕະພັນເກີນview
Familiarize yourself with the components of your Sharp SPC106X alarm clock:
ຮູບ 1: ດ້ານຫນ້າ View of Sharp SPC106X LED Alarm Clock. This image displays the front of the black alarm clock with a bright blue 1.0" LED display showing "12:01". Indicators for "PM" and "ALARM" are visible on the left side of the display. The "SHARP" logo is centered below the time. The clock features an ultra-thin design case and a stable base.
ການຄວບຄຸມ ແລະຕົວຊີ້ວັດ:
- 1.0" Blue LED Display: Shows current time and alarm time.
- ຕົວຊີ້ວັດ PM: Lights up when the time displayed is PM.
- ຕົວຊີ້ວັດສັນຍານເຕືອນໄພ: Lights up when the alarm is set.
- ປຸ່ມເວລາ: ໃຊ້ເພື່ອກໍານົດເວລາປະຈຸບັນ.
- ປຸ່ມປຸກ: ໃຊ້ເພື່ອຕັ້ງເວລາປຸກ.
- ປຸ່ມຊົ່ວໂມງ: Adjusts the hour for time or alarm settings.
- ປຸ່ມ MIN: Adjusts the minute for time or alarm settings.
- ປຸ່ມ SNOOZE/DIMMER: Located on top, this button activates snooze during an alarm and adjusts display brightness.
- ສະວິດເປີດ/ປິດສັນຍານເຕືອນໄພ: Located on the side, this switch enables or disables the alarm.
- LOUD/SOFT Switch: Located on the side, this switch adjusts the alarm volume.
- ຊ່ອງໃສ່ຫມໍ້ໄຟ: Located on the bottom for backup batteries (not included).
5. ຕັ້ງຄ່າ
5.1. ການເຊື່ອມຕໍ່ພະລັງງານ
- Unpack the alarm clock and its power adapter.
- Plug the power adapter into a standard household outlet. The LED display will illuminate.
- (Optional) For battery backup, open the battery compartment on the bottom of the unit and insert 2 AAA batteries (not included). This will preserve time settings during a power outage.
5.2. ການຕັ້ງເວລາປັດຈຸບັນ
- ກົດຄ້າງໄວ້ TIME ປຸ່ມ. ຕົວເລກຊົ່ວໂມງຈະເລີ່ມກະພິບ.
- ໃນຂະນະທີ່ຖື TIME ປຸ່ມ, ກົດປຸ່ມ ຊົ່ວໂມງ button repeatedly to advance to the correct hour. Observe the PM indicator for correct AM/PM setting.
- ໃນຂະນະທີ່ຍັງຖື TIME ປຸ່ມ, ກົດປຸ່ມ ນາທີ button repeatedly to advance to the correct minute.
- ປ່ອຍຕົວ TIME ປຸ່ມ. ເວລາໄດ້ຖືກຕັ້ງແລ້ວ.
6. ຄໍາແນະນໍາການດໍາເນີນງານ
6.1. ຕັ້ງຄ່າປຸກ
- ກົດຄ້າງໄວ້ ປຸກ ປຸ່ມ. ຕົວເລກຊົ່ວໂມງປຸກຈະເລີ່ມກະພິບ.
- ໃນຂະນະທີ່ຖື ປຸກ ປຸ່ມ, ກົດປຸ່ມ ຊົ່ວໂມງ ກົດປຸ່ມຊ້ຳໆເພື່ອຕັ້ງຊົ່ວໂມງປຸກທີ່ຕ້ອງການ. ສັງເກດໄຟສະແດງ PM.
- ໃນຂະນະທີ່ຍັງຖື ປຸກ ປຸ່ມ, ກົດປຸ່ມ ນາທີ ກົດປຸ່ມຊ້ຳໆເພື່ອຕັ້ງນາທີປຸກທີ່ຕ້ອງການ.
- ປ່ອຍຕົວ ປຸກ ປຸ່ມ. ເວລາປຸກໄດ້ຖືກຕັ້ງແລ້ວ.
6.2. ການເປີດໃຊ້/ປິດການໃຊ້ງານສັນຍານເຕືອນໄພ
- ເພື່ອເປີດໃຊ້ງານໂມງປຸກ, ເລື່ອນ ເປີດ / ປິດ switch (located on the side) to the "ON" position. The ALARM indicator on the display will light up.
- ເພື່ອປິດການໃຊ້ງານໂມງປຸກ, ເລື່ອນປຸ່ມ ເປີດ / ປິດ switch to the "OFF" position. The ALARM indicator will turn off.
6.3. ການໃຊ້ຟັງຊັນ Snooze
ເມື່ອສຽງປຸກດັງຂຶ້ນ, ກົດປຸ່ມໃຫຍ່ SNOOZE / DIMMER button on top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes.
6.4. Adjusting Display Brightness (Dimmer)
ກົດ SNOOZE / DIMMER button (when the alarm is not sounding) to cycle through different brightness levels (High, Low, Off) for the LED display.
6.5. ການປັບລະດັບສຽງເຕືອນ
ເລື່ອນໄດ້ LOUD/SOFT switch (located on the side) to select your preferred alarm volume level.
7. ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: ເຊັດເຄື່ອງດ້ວຍຜ້າອ່ອນ, ແຫ້ງ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ການປ່ຽນແບັດເຕີຣີ: Replace backup batteries annually or when the display shows signs of dimming during power outages.
- ການເກັບຮັກສາ: If storing the clock for an extended period, remove the backup batteries to prevent leakage.
8. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຈໍສະແດງຜົນໂມງປິດ. | ບໍ່ມີພະລັງງານຫຼືພະລັງງານ outage. | Ensure power adapter is securely plugged in. Check household power. If using battery backup, ensure batteries are fresh and correctly inserted. |
| ໂມງປຸກບໍ່ມີສຽງ. | ໂມງປຸກບໍ່ໄດ້ເປີດໃຊ້ງານ ຫຼື ລະດັບສຽງຕໍ່າເກີນໄປ. | Check if the ALARM ON/OFF switch is in the "ON" position. Verify the ALARM indicator is lit. Adjust the LOUD/SOFT switch to a higher volume. |
| Time/Alarm cannot be set. | Buttons not pressed correctly. | Ensure you are pressing and holding the TIME or ALARM button while adjusting hours/minutes. Refer to sections 5.2 and 6.1. |
| ຈໍສະແດງຜົນແມ່ນສະຫວ່າງ/ມືດເກີນໄປ. | Dimmer setting needs adjustment. | Press the SNOOZE/DIMMER button (when alarm is not sounding) to cycle through brightness levels. |
9. ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: SPC106X
- ຍີ່ຫໍ້: ແຫຼມ
- ສີ: ດຳ
- ປະເພດການສະແດງ: LED ດິຈິຕອລ
- ສີທີ່ສະແດງ: ສີຟ້າ
- ຂະຫນາດຈໍສະແດງຜົນ: 1.0 ນິ້ວ
- ຄຸນນະສົມບັດພິເສດ: ໂມງປຸກ, ເລື່ອນ, ປິດໄຟ
- ຂະໜາດຜະລິດຕະພັນ: 2.2"W x 3.9"H (Note: The provided dimensions are for width and height, depth is not specified but implied by the compact design)
- ແຫຼ່ງພະລັງງານ: Electrical Operation (AC powered)
- ແບັດ ສຳ ຮອງ: ແມ່ນແລ້ວ (ບໍ່ລວມແບັດເຕີລີ່)
- ປະເພດຫ້ອງ: ຫ້ອງນອນ
- ປະເພດການຕິດຕັ້ງ: ໂຕະ
- ວັດສະດຸກອບ: ພາດສະຕິກ
- ນ້ໍາຫນັກລາຍການ: 9.6 ອອນ
- ຜູ້ຜະລິດ: MZ Berger
- UPC: 049353612447
10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ການຮັບປະກັນຈໍາກັດ
MZ Berger & Company warrants to the original consumer purchaser of this product that it shall be free of defects in material and workmanship for one year from the purchase date. This warranty does not cover damage resulting from tampering, improper use, unauthorized modification, or misuse. This warranty is limited to repair or replacement of the product at MZ Berger's discretion.
To obtain warranty service, you must include a Proof of Purchase (sales receipt or photocopy) and a check or money order for USD $5.00 to cover the cost of handling. Also include your return address and a brief description of the issue. Ship the clock, postage prepaid, ໄປຫາທີ່ຢູ່ຂ້າງລຸ່ມນີ້:
ສູນບໍລິການ MZ Berger
29-76 ເໜືອ Boulevard
ເມືອງ Long Island, NY 11101
ການບໍລິການລູກຄ້າ
Please call Toll Free at 1-(800)-221-0131 for customer service assistance. Available Monday-Friday, 9:00 AM - 4:00 PM EST.
Please do not return the clock to the store without first contacting customer service.
