SINGER Cordless Smart Scissors Instruction Manual

ແນະນຳ

Thank you for choosing the SINGER Cordless Smart Scissors. This innovative cutting tool is designed to provide effortless cutting for various materials, enhancing your crafting and household tasks. Please read this manual thoroughly before first use to ensure safe and optimal operation of your device.

Image: The SINGER Cordless Smart Scissors, a white handheld device designed for easy cutting. It features an ergonomic handle and a visible cutting blade mechanism.

ຄໍາແນະນໍາຄວາມປອດໄພ

ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີເມື່ອໃຊ້ເຄື່ອງໃຊ້ໄຟຟ້າເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຕໍ່ການເກີດອັກຄີໄພ, ໄຟຟ້າຊອດ ແລະ ການບາດເຈັບສ່ວນບຸກຄົນ.

• Keep hands and body parts away from the cutting blades during operation.
• Do not allow children to operate this device. Store out of reach of children.
• Use only for intended purposes as described in this manual.
• ຫ້າມ​ນຳ​ອຸ​ປະ​ກອນ​ຈຸ່ມ​ໃສ່​ນ້ຳ​ຫຼື​ຂອງ​ແຫຼວ​ອື່ນໆ.
• Turn off and remove batteries before cleaning or changing blades.
• Inspect blades for damage before each use. Replace dull or damaged blades immediately.
• Do not attempt to cut extremely hard or thick materials that may damage the blades or motor.

ເນື້ອໃນຊຸດ

ກະ​ລຸ​ນາ​ກວດ​ສອບ​ເນື້ອ​ໃນ​ຂອງ​ຊຸດ​ເພື່ອ​ໃຫ້​ແນ່​ໃຈວ່​າ​ລາຍ​ການ​ທັງ​ຫມົດ​ມີ​ຢູ່​:

• 1 x SINGER Cordless Smart Scissors unit
• 1 x Set of Replacement Blades
• 1 x ຄູ່ມືແນະນຳ (ເອກະສານນີ້)

ຕັ້ງຄ່າ

Before using your Cordless Smart Scissors, you will need to install the batteries.

1. Locate the battery compartment cover, usually on the handle.
2. ເລື່ອນ ຫຼືຖອດຝາປິດເພື່ອເປີດຊ່ອງໃສ່.
3. Insert the required batteries (e.g., 2 x AA batteries, not included) according to the polarity indicators (+/-).
4. ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.
5. Ensure blades are securely attached. If replacing, refer to the "Maintenance" section.

ຄໍາແນະນໍາການດໍາເນີນງານ

Follow these steps for effective and safe operation:

1. ເປີດ: Locate the power switch or button, typically on the handle. Press or slide it to the "ON" position. The blades will begin to move.
2. ການຕັດ: Position the material you wish to cut between the blades. Gently guide the scissors along the desired cutting line. The motorized blades will do the work.
3. ຄວາມເຂົ້າກັນໄດ້ຂອງວັດສະດຸ: These scissors are designed to cut various materials including fabric, paper, cardboard, and tough denim. Avoid extremely thick or rigid materials that may strain the motor or damage the blades.
4. ປິດພະລັງງານ: After use, press or slide the power switch to the "OFF" position. Ensure the blades have stopped moving before setting the device down.

ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and performance of your Cordless Smart Scissors.

ທໍາຄວາມສະອາດ

• Always turn off the device and remove batteries before cleaning.
• Use a soft, dry cloth to wipe down the body of the scissors.
• Carefully remove any fabric fibers or debris from around the blades using a small brush or tweezers.
• ຫ້າມ​ໃຊ້​ເຄື່ອງ​ເຮັດ​ຄວາມ​ສະ​ອາດ​ຂັດ​ຫຼື​ຈຸ່ມ​ອຸ​ປະ​ກອນ​ໃນ​ນ​້​ໍ​າ.

ການປ່ຽນແຜ່ນໃບ

Dull blades can reduce cutting efficiency. Replace blades as needed using the included replacement set.

1. Ensure the device is turned off and batteries are removed.
2. Locate the blade release mechanism (refer to diagrams if available, or typically a small screw/latch).
3. Carefully remove the old blades, handling them by the non-sharp edges.
4. Insert the new blades, ensuring they are correctly aligned and secured.
5. Test the scissors on a scrap piece of material before resuming normal use.

ການແກ້ໄຂບັນຫາ

If you encounter issues with your Cordless Smart Scissors, refer to the following common problems and solutions:

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official SINGER webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

ສະຫນັບສະຫນູນອອນໄລນ໌: www.singer.com/support