ແນະນຳ
The HTC 4000 Trans-Web Fusible Web is designed to transform various fabrics into iron-on materials. This product features a polyimide web on release paper, ensuring a complete and uniform adhesive coverage when activated by heat. It is suitable for a wide range of fabric projects, providing a durable bond that withstands machine washing and dry cleaning.
ສິນຄ້າເກີນview
The HTC 4000 Trans-Web Fusible Web is an off-white, 100% polyimide adhesive web. It comes on a release paper, which protects the adhesive until heat is applied. The web measures 16 inches in width by 35 yards in length, offering ample material for multiple projects. This product is manufactured in the USA.
Image: A roll of HTC 4000 Trans-Web Fusible Web, off-white in color, with product information visible on the core.
ການຕັ້ງຄ່າແລະການກະກຽມ
Before applying the fusible web, ensure your fabric is clean and pre-shrunk if necessary. Gather the following items:
- HTC 4000 Trans-Web Fusible Web
- Fabric(s) to be fused
- Iron (dry iron recommended)
- ໂຕະ
- Scissors or rotary cutter
- Parchment paper or pressing cloth (optional, to protect iron and fabric)
Pre-heat your iron to the appropriate temperature for your fabric type. Avoid using steam during the fusing process unless specifically instructed by your fabric's care label or project requirements.
ຄຳແນະນຳໃນການໃຊ້ງານ: ການນຳໃຊ້
Follow these steps for optimal application of the HTC 4000 Trans-Web Fusible Web:
- ຕັດ Web: Cut a piece of Trans-Web slightly larger than the fabric piece you intend to make iron-on.
- Attach to Fabric: Place the Trans-Web, paper side up, onto the wrong side of the fabric. Ensure the adhesive side of the web is in contact with the fabric.
- Fuse to Fabric: Using a dry iron set to the appropriate temperature for your fabric, press firmly over the paper backing for approximately 5-10 seconds. Apply even pressure. The heat will activate the adhesive, bonding it to the fabric.
- Cool and Peel: Allow the fabric and web to cool completely. Once cool, carefully peel away the release paper from the fabric. The adhesive should now be permanently bonded to the wrong side of your fabric, making it an iron-on piece.
- Position and Fuse: Position your newly prepared iron-on fabric piece onto your project fabric. Place a pressing cloth or parchment paper over the piece to protect your iron and project.
- ການຍຶດຕິດສຸດທ້າຍ: Press firmly with a dry iron for 10-15 seconds, or until the piece is securely bonded to the project fabric. Ensure all edges are adhered.
ໝາຍເຫດ: Always test on a scrap piece of fabric first to determine the ideal iron temperature and pressing time for your specific materials.
ການດູແລແລະບໍາລຸງຮັກສາ
Projects created with HTC 4000 Trans-Web Fusible Web are designed for durability and ease of care:
- ການຊັກ: The fused fabric is machine washable. Use appropriate washing cycles and detergents for your fabric type.
- ການອົບແຫ້ງ: The fused fabric is dry cleanable. It also withstands multiple machine washings without compromising the adhesive bond.
- ການເກັບຮັກສາ: Store unused Trans-Web in a cool, dry place away from direct sunlight to maintain its adhesive properties.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Fusible web peels off after ironing. | Insufficient heat or pressure during application; iron temperature too low for fabric type; not enough pressing time. |
|
| Adhesive does not transfer evenly. | Uneven heat distribution; iron not fully pre-heated. |
|
ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: 4000
- ຍີ່ຫໍ້: HTC
- ວັດສະດຸ: 100% Polyimide Web
- ສີ: ສີຂາວ
- ຂະໜາດ: 16 inches (width) x 35 yards (length)
- ຂະໜາດແພັກເກດ: ປະມານ 8.58 x 1.85 x 19.25 ນິ້ວ
- ນ້ໍາຫນັກລາຍການ: 0.8 ອອນ
- ປະເພດກາວ: Heat-activated fusible
- ການດູແລ: Machine washable and dry cleanable
- ປະເທດຕົ້ນກໍາເນີດ: ສະຫະລັດ
- UPC: 759191400075
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For specific warranty information or product support, please contact HTC directly through their official webເວັບໄຊ ຫຼືຊ່ອງທາງການບໍລິການລູກຄ້າ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.
