Foxconn TSAA725 ATX Tower Case Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your Foxconn TSAA725 ATX Tower Case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use of the product. Keep this manual for future reference.

ຮູບພາບ: ທາງຫນ້າ view of the Foxconn TSAA725 ATX Tower Case, showcasing its design and front panel ports.

2. ຂໍ້ມູນຄວາມປອດໄພ

ປະຕິບັດຕາມຄໍາແນະນໍາດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ເພື່ອປ້ອງກັນຄວາມເສຍຫາຍຂອງຜະລິດຕະພັນຫຼືການບາດເຈັບຕໍ່ຕົວທ່ານເອງ:

• Always disconnect the power supply from the wall outlet before opening the computer case or performing any installation/maintenance.
• Handle internal components with care to avoid electrostatic discharge (ESD) damage. Use an anti-static wrist strap if available.
• ຮັບປະກັນການລະບາຍອາກາດທີ່ເໝາະສົມອ້ອມຮອບກ່ອງເພື່ອປ້ອງກັນຄວາມຮ້ອນເກີນໄປ.
• Do not expose the case to moisture or extreme temperatures.
• ຮັກສາສ່ວນນ້ອຍໆຢູ່ຫ່າງຈາກເດັກນ້ອຍ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​:

• Foxconn TSAA725 ATX Tower Case
• 350W Power Supply (pre-installed)
• Accessory kit (screws, standoffs, cable ties)
• ຄູ່ມືການສອນນີ້

4. ຄຸນນະສົມບັດທີ່ສໍາຄັນ

The Foxconn TSAA725 ATX Tower Case offers the following features:

• ວັດສະດຸ: 0.5mm SGCC Alloy Steel construction for durability.
• ຮອງຮັບເມນບອດ: Compatible with ATX and Micro ATX motherboards.
• ບ່ອນຈອດລົດຂັບ:
  • 3x 5.25" External Bays
  • 2x 3.5" External Bays
  • 4x 3.5" Internal Bays
• ລະບົບເຮັດຄວາມເຢັນ:
  • 1x 80/92/120mm rear fan support (fan not included)
  • Optional 1x 80/92/120mm front fan support (fan not included)
  • 80mm Air Duct for CPU cooling.
• ແຜງ I/O ດ້ານໜ້າ:
  • 2x ພອດ USB 2.0
  • 1x ຊ່ອງສຽບຫູຟັງ
  • 1x ຊ່ອງສຽບໄມໂຄຣໂຟນ
• ການສະຫນອງພະລັງງານ: Integrated 350W Power Supply.

5. ການຕັ້ງຄ່າ ແລະ ການຕິດຕັ້ງອຸປະກອນຕ່າງໆ

Follow these steps to install your computer components into the Foxconn TSAA725 case:

1. ກະກຽມກໍລະນີ:

   Place the case on a flat, stable surface. Remove the side panel(s) by unscrewing the thumbscrews at the rear of the case and sliding the panel backward.

2. ຕິດຕັ້ງເມນບອດ:

   Install the necessary standoffs onto the motherboard tray according to your motherboard's form factor (ATX or Micro ATX). Carefully place the motherboard onto the standoffs, aligning the screw holes. Secure the motherboard with screws provided in the accessory kit.

3. Install Drives (HDD/SSD):

   For 3.5" internal drives, slide the drive into an available 3.5" internal bay and secure it with screws from the side. For 5.25" external drives (e.g., optical drives), remove the front panel bay cover, slide the drive in from the front, and secure it with screws.
4. ຕິດຕັ້ງບັດຂະຫຍາຍ:

   Remove the appropriate expansion slot covers at the rear of the case. Insert your graphics card or other expansion cards into the PCIe/PCI slots on the motherboard and secure them with screws.

5. ເຊື່ອມຕໍ່ສາຍ:

   Connect the power supply cables to the motherboard (24-pin ATX, 4/8-pin CPU), graphics card (if applicable), and drives (SATA power). Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on the motherboard. Refer to your motherboard manual for header locations.

6. ການຄຸ້ມຄອງສາຍໄຟ:

   Route cables neatly to improve airflow and aesthetics. Use cable ties from the accessory kit if needed.
7. ປິດກໍລະນີ:

   Once all components are installed and cables are connected, reattach the side panel(s) and secure them with the thumbscrews.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

After successful assembly, connect your peripherals (monitor, keyboard, mouse) and power cable to the case. Press the power button on the front panel to start your computer.

ຜອດ I/O ແຜງໜ້າ:

• ພອດ USB 2.0: For connecting USB devices such as keyboards, mice, and external storage.
• ຫູຟັງ Jack: ສໍາລັບການເຊື່ອມຕໍ່ຫູຟັງຫຼືລໍາໂພງ.
• ໄມໂຄຣໂຟນ Jack: ສໍາລັບການເຊື່ອມຕໍ່ໄມໂຄໂຟນ.
• ປຸ່ມເປີດປິດ: ເພື່ອເປີດ ຫຼືປິດຄອມພິວເຕີ.
• ປຸ່ມຣີເຊັດ: To restart the computer.

7. ບໍາລຸງຮັກສາ

Regular maintenance helps ensure optimal performance and longevity of your computer case:

• ທໍາຄວາມສະອາດຂີ້ຝຸ່ນ: Periodically clean dust from inside the case, especially from fans and heatsinks, using compressed air. Ensure the computer is powered off and unplugged before cleaning.
• ທໍາຄວາມສະອາດພາຍນອກ: ເຊັດດ້ານນອກຂອງກໍລະນີດ້ວຍຄວາມອ່ອນ, ງamp ຜ້າ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
• ການຄຸ້ມຄອງສາຍໄຟ: ກວດສອບເສັ້ນທາງສາຍໄຟເປັນໄລຍະເພື່ອຮັບປະກັນວ່າບໍ່ມີສາຍໄຟໃດໆກີດຂວາງການໄຫຼວຽນຂອງອາກາດ ຫຼື ການເຮັດວຽກຂອງພັດລົມ.

8. ການແກ້ໄຂບັນຫາ

ຖ້າເຈົ້າພົບບັນຫາ, ໃຫ້ອ້າງອີງເຖິງວິທີແກ້ໄຂທົ່ວໄປຕໍ່ໄປນີ້:

• ຄອມພິວເຕີເປີດບໍ່ໄດ້:
  • Ensure the power cable is securely connected to both the case's power supply and the wall outlet.
  • Check if the power supply switch (if present) is in the 'ON' position.
  • ກວດ​ສອບ​ວ່າ​ສາຍ​ປຸ່ມ​ເປີດ​ປິດ​ດ້ານ​ໜ້າ​ແມ່ນ​ເຊື່ອມ​ຕໍ່​ກັບ​ເມນບອດ​ຢ່າງ​ຖືກ​ຕ້ອງ.
• ບໍ່ມີການສະແດງຜົນຢູ່ຈໍພາບ:
  • Ensure the monitor is powered on and connected to the correct video output on your graphics card or motherboard.
  • ຣີເຊັດບັດກາຟິກ ແລະໂມດູນ RAM.
• ພອດ USB ບໍ່ເຮັດວຽກ:
  • Verify that the front panel USB cables are correctly connected to the motherboard's USB headers.
  • ລອງເຊື່ອມຕໍ່ອຸປະກອນກັບພອດ USB ອື່ນ.

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the official Foxconn webເວັບໄຊ ຫຼືຕິດຕໍ່ຮ້ານຂາຍຍ່ອຍໃນທ້ອງຖິ່ນຂອງທ່ານ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ຊັບພະຍາກອນອອນໄລນ໌: For additional support and updated drivers, visit the official Foxconn support page.

ໝາຍເຫດ: ເງື່ອນໄຂການຮັບປະກັນອາດແຕກຕ່າງກັນໄປຕາມພາກພື້ນ.