ແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your Zurn Z812B4-XL-3F Brass Bathroom Faucet. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.
ຂໍ້ມູນຄວາມປອດໄພ
- ສະເຫມີປິດການສະຫນອງນ້ໍາຕົ້ນຕໍກ່ອນທີ່ຈະຕິດຕັ້ງຫຼືໃຫ້ບໍລິການ faucet.
- ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເຫມາະສົມ, ເຊັ່ນ: ແວ່ນຕາຄວາມປອດໄພ, ໃນລະຫວ່າງການຕິດຕັ້ງ.
- ຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບພາກສ່ວນໃດນຶ່ງຂອງຂະບວນການຕິດຕັ້ງ, ໃຫ້ປຶກສາກັບຊ່າງທໍ່ນໍ້າທີ່ມີຄຸນວຸດທິ.
- ຢ່າເຮັດໃຫ້ການເຊື່ອມຕໍ່ເກີນ, ເພາະວ່ານີ້ອາດຈະເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍຕໍ່ faucet ຫຼືທໍ່ປະປາ.
- ຮັບປະກັນວ່າລະຫັດປະປາທ້ອງຖິ່ນທັງໝົດໄດ້ຖືກປະຕິບັດຕາມໃນລະຫວ່າງການຕິດຕັ້ງ.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າມີສ່ວນປະກອບທັງຫມົດກ່ອນທີ່ຈະເລີ່ມຕົ້ນການຕິດຕັ້ງ.
- Zurn Z812B4-XL-3F Centerset Faucet Body with Gooseneck Spout
- Two (2) Wrist Blade Handles (Hot and Cold)
- ຮາດແວຕິດຕັ້ງ
- Gaskets and Seals
- ຄໍາແນະນໍາການຕິດຕັ້ງ (ຄູ່ມືນີ້)
Image: Zurn Z812B4-XL-3F Brass Bathroom Faucet. This image displays the complete faucet assembly, featuring a polished chrome finish, a high-arc gooseneck spout, and two wrist blade handles for hot and cold water control. The base is designed for a centerset installation.
ເຄື່ອງມືທີ່ຈໍາເປັນ
The following tools are typically required for faucet installation:
- Wrench ປັບໄດ້
- Basin Wrench (optional, but recommended for tight spaces)
- Screwdriver ຫົວ ໜ້າ Phillips
- Putty ຫຼື Silicone Sealant ຂອງ Plumber
- ໄຟສາຍ
- Teflon Tape (thread seal tape)
- Bucket and Towel
ການຕັ້ງຄ່າ (ການຕິດຕັ້ງ)
Follow these steps for proper installation of your Zurn Z812B4-XL-3F faucet. Refer to local plumbing codes for specific requirements.
- ການກະກຽມ Sink: Ensure the sink surface is clean and free of debris. If replacing an old faucet, remove it and clean the mounting area thoroughly.
- ປິດການສະຫນອງນ້ໍາ: Locate the main water shut-off valve for your home or the shut-off valves under the sink. Turn them off completely. Open the existing faucet to drain any remaining water from the lines.
- ຕິດຕັ້ງ Faucet Body:
- Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet body where it will meet the sink surface.
- Insert the faucet body through the holes in the sink or countertop. Ensure the hot and cold inlets align with the corresponding supply lines.
- From underneath the sink, secure the faucet body using the provided mounting hardware (washers and nuts). Hand-tighten first, then use an adjustable wrench to snug the nuts, being careful not to overtighten.
- ເຊື່ອມຕໍ່ສາຍນ້ຳປະປາ:
- Wrap Teflon tape around the threaded ends of the faucet's hot and cold water inlets.
- Connect the hot water supply line to the hot inlet (typically on the left) and the cold water supply line to the cold inlet (typically on the right).
- ຂັນການເຊື່ອມຕໍ່ໃຫ້ແໜ້ນດ້ວຍປະແຈປັບໄດ້. ຢ່າຂັນໃຫ້ແໜ້ນເກີນໄປ.
- ຕິດຕັ້ງ Handles: Attach the wrist blade handles to their respective valve stems. Ensure the hot handle is on the left (red indicator) and the cold handle is on the right (blue indicator). Secure them according to the specific design (e.g., with a set screw).
- ການທົດສອບສໍາລັບການຮົ່ວໄຫລ:
- ຄ່ອຍໆເປີດການສະຫນອງນ້ໍາຕົ້ນຕໍ.
- Check all connections for leaks. If leaks are present, tighten the connection slightly until the leak stops. Do not overtighten.
- Open both hot and cold handles to flush the lines and check for proper water flow.
ຄໍາແນະນໍາການດໍາເນີນງານ
The Zurn Z812B4-XL-3F faucet features two wrist blade handles for precise control of water temperature and flow.
- ນ້ໍາເຢັນ: Turn the right handle (blue indicator) counter-clockwise to open for cold water flow. Turn clockwise to close.
- ນ້ໍາຮ້ອນ: Turn the left handle (red indicator) counter-clockwise to open for hot water flow. Turn clockwise to close.
- ການຄວບຄຸມອຸນຫະພູມ: ປັບດ້າມຈັບຮ້ອນ ແລະ ເຢັນພ້ອມໆກັນເພື່ອໃຫ້ໄດ້ອຸນຫະພູມນ້ຳທີ່ຕ້ອງການ.
- ການຄວບຄຸມການໄຫຼເຂົ້າ: ຍິ່ງຈັບມືຖືກຫັນໄປອີກ, ນ້ໍາໄຫຼຫຼາຍ.
ບໍາລຸງຮັກສາ
ການເຮັດຄວາມສະອາດແລະການບໍາລຸງຮັກສາເປັນປົກກະຕິຈະຊ່ວຍຮັກສາການສໍາເລັດຮູບແລະການທໍາງານຂອງ faucet ຂອງທ່ານ.
- ທໍາຄວາມສະອາດສໍາເລັດຮູບ: ເຮັດຄວາມສະອາດ chrome ສໍາເລັດຮູບທີ່ອ່ອນໂຍນ, damp cloth and mild soap. Rinse thoroughly and dry with a soft cloth to prevent water spots. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- ການບຳລຸງຮັກສາເຄື່ອງປັ່ນອາກາດ: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the tip of the spout, clean any debris or mineral deposits, and rinse thoroughly before reattaching.
- ການປ້ອງກັນການຮົ່ວໄຫຼ: Periodically check under the sink for any signs of leaks. Address small leaks promptly to prevent larger issues.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ນໍ້າໄຫຼຕໍ່າ | ເຄື່ອງສູບອາກາດອຸດຕັນ; ປ່ຽງປິດບາງສ່ວນ; debris ໃນສາຍການສະຫນອງ. | ສະອາດ aerator; ໃຫ້ແນ່ໃຈວ່າປ່ຽງປິດເປີດຢ່າງເຕັມສ່ວນ; flush ສາຍການສະຫນອງ. |
| Faucet ຮົ່ວຈາກ spout | Worn out washer or cartridge. | Replace the internal washer or cartridge. Consult Zurn support for replacement parts. |
| Leaks from Base of Faucet | Loose mounting nuts; improper sealant application. | Tighten mounting nuts (do not overtighten); reapply plumber's putty or silicone sealant if necessary. |
| ບັນຫາອຸນຫະພູມນ້ໍາ | Incorrect hot/cold supply line connection; water heater issues. | ກວດສອບການເຊື່ອມຕໍ່ສາຍການສະຫນອງ; ກວດເບິ່ງການຕັ້ງຄ່າເຄື່ອງເຮັດຄວາມຮ້ອນ. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | Zurn |
| ໝາຍເລກຕົວແບບ | Z812B4-XL-3F |
| ປະເພດການຕິດຕັ້ງ | Deck Mount, Centerset |
| ປະເພດສໍາເລັດຮູບ | Chrome ຂັດ |
| ຈຳ ນວນມືຈັບ | 2 (Lever/Wrist Blade) |
| ການຈັດການວັດສະດຸ | ທອງເຫຼືອງ |
| ນັບຂຸມ | 2 |
| ນ້ໍາຫນັກລາຍການ | 5 ປອນ |
| ຂະໜາດສິນຄ້າ | 14.8 x 12.1 x 2.7 ນິ້ວ |
| UPC | 670240367760 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information or technical support regarding your Zurn Z812B4-XL-3F faucet, please contact Zurn customer service directly. Details can typically be found on the official Zurn webເວັບໄຊ ຫຼືຜ່ານເອກະສານການຊື້ສິນຄ້າຂອງທ່ານ.
ຜູ້ຜະລິດ: Zurn
Webເວັບໄຊ: www.zurn.com (ຫມາຍເຫດ: ນີ້ແມ່ນການເຊື່ອມຕໍ່ທົ່ວໄປແລະອາດຈະບໍ່ນໍາໄປສູ່ການສະຫນັບສະຫນູນຜະລິດຕະພັນໂດຍກົງ.)
