ແນະນຳ
This manual provides detailed instructions for the safe and proper installation and use of the Peerless Paramount PF640 Universal Flat Panel Wall Mount. This mount is designed to securely hold flat panel displays ranging from 23 inches to 46 inches, with a maximum load capacity of 150 lbs. Please read all instructions carefully before beginning installation.
ຂໍ້ມູນຄວາມປອດໄພ
- ຄວາມອາດສາມາດນ້ໍາຫນັກ: Do not exceed the maximum load capacity of 150 lbs (68 kg). Exceeding this limit can result in serious injury or property damage.
- ໂຄງສ້າງກຳແພງ: Ensure the mounting surface can safely support the combined weight of the mount and the display. Consult a qualified professional if unsure.
- ເຄື່ອງມື: ໃຊ້ເຄື່ອງມືທີ່ເໝາະສົມສຳລັບການຕິດຕັ້ງ. ໃສ່ແວ່ນຕານິລະໄພ ແລະ ອຸປະກອນປ້ອງກັນອື່ນໆຕາມຄວາມຕ້ອງການ.
- ເດັກນ້ອຍ: ໃຫ້ເດັກນ້ອຍຢູ່ຫ່າງຈາກພື້ນທີ່ຕິດຕັ້ງໃນລະຫວ່າງການຕັ້ງຄ່າ.
- ການລະບາຍອາກາດ: Ensure adequate ventilation around the mounted display.
ລາຍການຊິ້ນສ່ວນ
ກວດສອບໃຫ້ແນ່ໃຈວ່າມີອົງປະກອບທັງໝົດຢູ່ກ່ອນເລີ່ມການຕິດຕັ້ງ. ຖ້າມີຊິ້ນສ່ວນໃດຂາດຫາຍໄປ ຫຼື ເສຍຫາຍ, ຢ່າດຳເນີນການຕິດຕັ້ງຕໍ່ໄປ ແລະ ຕິດຕໍ່ຝ່າຍສະໜັບສະໜູນລູກຄ້າ.
- ແຜ່ນຕິດຝາ
- Display Adapter Brackets (2)
- Mounting Hardware Kit (various screws, washers, spacers for display and wall)
- ແມ່ແບບການຕິດຕັ້ງ
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps carefully for proper installation. Two people are recommended for safe installation.
- ການກະກຽມກໍາແພງຫີນ:
- Locate wall studs using a stud finder. Mark the center of the studs.
- Position the installation template on the wall at the desired height. Ensure it is level.
- Mark the drilling locations through the template onto the wall.
- ຕິດແຜ່ນຕິດຝາ:
- ເຈາະຮູທົດລອງຢູ່ບ່ອນທີ່ໝາຍໄວ້.
- Secure the wall plate assembly to the wall using the appropriate lag bolts and washers. Ensure it is firmly attached and level.
- Attach Adapter Brackets to Display:
- Carefully place the display face down on a soft, clean surface.
- Identify the VESA mounting holes on the back of your display.
- Select the correct screws, washers, and spacers from the hardware kit that fit your display's mounting holes.
- Attach the two display adapter brackets to the back of the display. Ensure the hooks on the brackets are facing upwards and are positioned to engage with the wall plate.
- Mount Display to Wall Plate:
- With assistance, carefully lift the display with the attached adapter brackets.
- Hook the top edge of the display adapter brackets onto the top rail of the wall plate.
- Gently lower the display until the brackets fully engage with the wall plate.
- Secure the bottom of the display adapter brackets to the wall plate using the provided security screws or locking mechanisms to prevent accidental dislodgement.
- Adjusting Display (if applicable):
- The PF640 allows for horizontal screen adjustment up to 6 inches for centering the screen on the wall. Loosen the appropriate screws on the display adapter brackets, slide the display to the desired position, and re-tighten the screws.
ປະຕິບັດການ
Once installed, the Peerless Paramount PF640 provides a secure, flat mounting solution. While primarily a fixed flat mount, it offers minor horizontal adjustment for optimal positioning.
- ການປັບແນວນອນ: As noted in the installation section, the display can be shifted horizontally up to 6 inches after initial mounting to achieve perfect centering. This is done by loosening the securing screws on the display brackets, sliding the display along the wall plate, and then re-tightening the screws.
- ການຄຸ້ມຄອງສາຍໄຟ: Ensure all cables connected to your display are routed safely and do not interfere with the mount or put strain on the connections.
ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and safety of your wall mount.
- ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດ mount ດ້ວຍຜ້າອ່ອນ, ແຫ້ງ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ການກວດກາແຕ່ລະໄລຍະ: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or minor shifts can cause fasteners to loosen.
- ການກວດສອບນ້ຳໜັກ: Do not add additional weight to the display or mount beyond its specified capacity.
ການແກ້ໄຂບັນຫາ
ຖ້າທ່ານພົບບັນຫາໃນລະຫວ່າງ ຫຼື ຫຼັງຈາກການຕິດຕັ້ງ, ໃຫ້ອ້າງອີງເຖິງບັນຫາ ແລະ ວິທີແກ້ໄຂທົ່ວໄປຕໍ່ໄປນີ້.
- ຈໍສະແດງຜົນບໍ່ແມ່ນລະດັບ:
ການແກ້ໄຂ: Ensure the wall plate was installed level. If the wall plate is level, check if the display adapter brackets are properly aligned and secured to the display. Some mounts allow for minor post-installation leveling adjustments; refer to the specific design of the PF640 for this feature.
- Mount ຮູ້ສຶກບໍ່ຫມັ້ນຄົງ:
ການແກ້ໄຂ: Immediately remove the display. Re-check all wall mounting screws to ensure they are securely fastened into wall studs or appropriate anchors. Verify the wall structure can support the weight. If unsure, consult a professional.
- Cannot attach display to wall plate:
ການແກ້ໄຂ: Ensure the display adapter brackets are correctly oriented and attached to the display, and that the hooks are properly aligned with the wall plate's top rail. Verify that the display's VESA pattern is compatible with the mount's adapter brackets.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | Peerless |
| ໝາຍເລກຕົວແບບ | ຄໍາຖາມທີ 94681 |
| ຂະໜາດໜ້າຈໍທີ່ເຂົ້າກັນໄດ້ | 23 ນິ້ວ ຫາ 46 ນິ້ວ |
| ຄວາມສາມາດໃນການໂຫຼດສູງສຸດ | 150 lbs (68 ກິໂລ) |
| ປະເພດການຕິດຕັ້ງ | ຕິດຝາ |
| ປະເພດການເຄື່ອນໄຫວ | Fixed (with horizontal adjustment) |
| ໄລຍະຫ່າງຈາກ Wall | 1 inch (ultra-slim design) |
| ຂະໜາດສິນຄ້າ | 21.8 x 10.9 x 1.7 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 12.43 ປອນ |
| UPC | 735029252344 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information or technical support, please refer to the official Peerless webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.
ຜູ້ຜະລິດ: Peerless
Webເວັບໄຊ: www.peerless-av.com
