Axxess GMOS-05

ຄູ່ມືຜູ້ໃຊ້ Axxess GMOS-05 OnStar Interface

Model: GMOS-05 | Brand: Axxess

1. ບົດແນະນຳ

The Axxess GMOS-05 OnStar Interface is designed to facilitate the replacement of an Original Equipment Manufacturer (OEM) radio with an aftermarket receiver in specific non-amplified GM vehicles. This interface is compatible with vehicles equipped with the "Door-n-Lock" style harness. It ensures the retention of key factory features, including OnStar functionality and safety/warning chimes, while also providing necessary outputs for navigation radio installations.

2. ຂໍ້ມູນຄວາມປອດໄພ

Please read all instructions carefully before installation. Improper installation may result in damage to the vehicle's electrical system, the interface module, or the aftermarket radio.

3. ເນື້ອໃນຊຸດ

Verify that all items are present before proceeding with the installation.

Axxess GMOS-05 Interface Module and Wiring Harnesses
ຮູບທີ 3.1: Axxess GMOS-05 Interface Module and Wiring Harnesses. This image displays the main GMOS-05 interface module, a black rectangular box, along with two distinct wiring harnesses. One harness features a large white multi-pin connector, while the other has a smaller black connector, both designed for vehicle integration.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

This section provides general instructions for installing the GMOS-05 interface. Specific vehicle disassembly and reassembly procedures are not covered and should be referenced from a vehicle-specific service manual or professional guide.

4.1. ການເຊື່ອມຕໍ່ສາຍໄຟ

Match the wires from the GMOS-05 harness to the corresponding wires on your aftermarket radio's harness. Refer to the color codes below.

Close-up of Main Wiring Harness Connector
ຮູບທີ 4.1: Close-up of Main Wiring Harness Connector. This image shows a detailed view of the primary wiring harness, highlighting the multi-colored wires and the large white connector that interfaces with the vehicle's factory wiring. A smaller red connector is also visible, typically for specific signal wires.
GMOS-05 Wiring Color Code
ສີສາຍຟັງຊັນເຊື່ອມຕໍ່ຫາ
ສີເຫຼືອງພະລັງງານຄົງທີ່ 12VAftermarket Radio Yellow Wire
ສີແດງພະລັງງານອຸປະກອນເສີມ 12VAftermarket Radio Red Wire
ດຳດິນAftermarket Radio Black Wire
ສີສົ້ມແສງໄຟAftermarket Radio Orange Wire (if applicable)
ສີຟ້າ/ສີຂາວAmpLifier ເປີດວິທະຍຸຫຼັງການຂາຍ Amp Turn-On Wire (if applicable)
ສີຂຽວລຳໂພງດ້ານຊ້າຍ (+)Aftermarket Radio Left Front Speaker (+)
ສີຂຽວ/ດຳລຳໂພງດ້ານຊ້າຍ (-)Aftermarket Radio Left Front Speaker (-)
ສີຂາວລຳໂພງດ້ານຂວາ (+)Aftermarket Radio Right Front Speaker (+)
ຂາວ/ດຳລຳໂພງດ້ານຂວາ (-)Aftermarket Radio Right Front Speaker (-)
ສີເທົາລຳໂພງຫລັງຊ້າຍ (+)Aftermarket Radio Left Rear Speaker (+)
ສີເທົາ/ດຳລຳໂພງຫລັງຊ້າຍ (-)Aftermarket Radio Left Rear Speaker (-)
ສີມ່ວງລຳໂພງຫລັງຂວາ (+)Aftermarket Radio Right Rear Speaker (+)
ສີມ່ວງ / ດຳລຳໂພງຫລັງຂວາ (-)Aftermarket Radio Right Rear Speaker (-)
ສີຂຽວອ່ອນເບກບ່ອນຈອດລົດ OutputAftermarket Radio Parking Brake Input (for navigation)
ສີຟ້າVehicle Speed Sense (VSS) OutputAftermarket Radio VSS Input (for navigation)
ສີນ້ຳຕານReverse OutputAftermarket Radio Reverse Input (for navigation/camera)

ໝາຍເຫດ: This wiring diagram is a general guide. Always refer to the specific wiring instructions provided with your aftermarket radio and vehicle for precise connections.

4.2. ຂັ້ນຕອນການຕິດຕັ້ງ

  1. ກຽມລົດ: Disconnect the negative battery terminal. Remove the factory radio from the dashboard.
  2. ການເຊື່ອມຕໍ່ສາຍ: Connect the wires from the GMOS-05 harness to the aftermarket radio harness according to the wiring color code (Section 4.1). Solder and heat-shrink all connections for reliability.
  3. Connect GMOS-05 Module: Plug the prepared GMOS-05 harness into the GMOS-05 interface module.
  4. ການເຊື່ອມຕໍ່ຍານພາຫະນະ: Connect the vehicle-specific connectors from the GMOS-05 harness into the factory wiring harnesses in the vehicle's radio opening.
  5. ຜົນການນຳທາງ: If installing a navigation radio, connect the Light Green (Parking Brake), Blue (VSS), and Brown (Reverse) wires from the GMOS-05 harness to the corresponding inputs on your navigation radio.
  6. ລະບົບການທົດສອບ: Before reassembling the dashboard, reconnect the vehicle's negative battery terminal. Turn on the ignition and test the aftermarket radio, OnStar, and safety chimes.
  7. ປັບ​ການ​ຕັ້ງ​ຄ່າ​: Adjust OnStar volume and chime levels as described in Section 5.1.
  8. ສະພາສຸດທ້າຍ: Once all functions are verified, securely mount the aftermarket radio and reassemble the dashboard.

5. Operating Features and Adjustments

The GMOS-05 interface retains several factory features and allows for adjustments to optimize your audio experience.

5.1. OnStar and Chime Volume Adjustment

The GMOS-05 allows for independent adjustment of OnStar volume and safety/warning chime levels. This is typically done via potentiometers (small adjustment screws) located on the GMOS-05 module itself.

Perform these adjustments with the vehicle running and the aftermarket radio powered on to accurately gauge the sound levels.

5.2. Navigation Radio Outputs

The GMOS-05 provides dedicated outputs for aftermarket navigation radios, which require specific vehicle data for proper operation.

6. ບໍາລຸງຮັກສາ

The Axxess GMOS-05 interface module is designed for maintenance-free operation once properly installed.

7. ການແກ້ໄຂບັນຫາ

ບັນຫາທົ່ວໄປແລະການແກ້ໄຂ
ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
No audio from aftermarket radio.Incorrect speaker wiring; no power to radio; interface not initialized.Verify all speaker wires are correctly connected. Check 12V constant and accessory power. Ensure the interface is properly connected to the vehicle's data bus.
OnStar or safety chimes are not working or are too loud/quiet.Incorrect connection to GMOS-05; volume potentiometers need adjustment.Confirm the GMOS-05 module is properly connected. Adjust the "OnStar Vol" and "Chime Vol" potentiometers on the module (refer to Section 5.1).
Aftermarket radio does not power on.No 12V constant or accessory power; blown fuse.Check the vehicle's fuse box for blown fuses. Verify the Yellow (constant) and Red (accessory) wires are correctly connected and receiving power.
Navigation features (e.g., parking brake, VSS, reverse) are not functioning.Outputs from GMOS-05 not connected to navigation radio.Ensure the Light Green, Blue, and Brown wires from the GMOS-05 are correctly connected to the corresponding inputs on your navigation radio (refer to Section 4.1).

If troubleshooting steps do not resolve the issue, contact Axxess technical support or a certified installer.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The Axxess GMOS-05 interface is manufactured by Metra Electronics. For warranty claims or technical support, please contact the retailer from whom the product was purchased. The retailer will then coordinate with Metra Electronics for warranty services. It is recommended to retain your proof of purchase for warranty purposes.

For additional technical assistance or detailed product information, please visit the official Axxess or Metra Electronics webເວັບໄຊ.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - GMOS-05

ກ່ອນview ຄຳແນະນຳໃນການຕິດຕັ້ງ AXXESS GMOS-044 ສຳລັບ Chevrolet Cruze
ຄຳແນະນຳການຕິດຕັ້ງລະອຽດສຳລັບອິນເຕີເຟດ AXXESS GMOS-044, ເຊິ່ງເຮັດໃຫ້ສາມາດຮັກສາຄຸນສົມບັດຂອງໂຮງງານເຊັ່ນ OnStar, ລະຄັງ ແລະ ການຄວບຄຸມພວງມາໄລໃນລົດ Chevrolet Cruze ຮຸ່ນ 2011-2016 ທີ່ມີໜ້າຈໍສີດຽວ.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງສ່ວນຕິດຕໍ່ຂໍ້ມູນ Axxess GMOS-13 GM ສໍາລັບ 2005-2011 Cadillac STS
ຄູ່ມືການຕິດຕັ້ງສໍາລັບ Axxess GMOS-13 GM Data Interface, ເຮັດໃຫ້ການລວມຕົວເຄື່ອງສຽງໃນລົດຫຼັງການຂາຍໃນ 2005-2011 ຍານພາຫະນະ Cadillac STS ໃນຂະນະທີ່ຮັກສາຄຸນສົມບັດຂອງໂຮງງານເຊັ່ນ OnStar, Bluetooth, ແລະ ampລະບົບສຽງທີ່ປັບປຸງ.
ກ່ອນview ຄຳແນະນຳໃນການຕິດຕັ້ງ Axxess GMOS-LAN-012
ຄູ່ມືການຕິດຕັ້ງລະອຽດສຳລັບອິນເຕີເຟດ Axxess GMOS-LAN-012, ເຊິ່ງສະໜອງຄຸນສົມບັດຕ່າງໆເຊັ່ນ: ພະລັງງານເສີມ, ພະລັງງານເສີມທີ່ຮັກສາໄວ້, ແລະ ຄວາມເຂົ້າກັນໄດ້ກັບລົດ GM ຕ່າງໆ. ລວມມີຄຳແນະນຳກ່ຽວກັບການເຊື່ອມຕໍ່ສາຍໄຟ, ຂັ້ນຕອນການຂຽນໂປຣແກຣມ, ແລະ ຄຳແນະນຳໃນການແກ້ໄຂບັນຫາ.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງ Axxess AX-GMLAN29 GM Data Interface 2006-2017
ຄຳແນະນຳການຕິດຕັ້ງສຳລັບອິນເຕີເຟດຂໍ້ມູນ Axxess AX-GMLAN29 GM, ອອກແບບມາສຳລັບລົດ GM ປີ 2006-2017. ຄູ່ມືນີ້ລະບຸລາຍລະອຽດກ່ຽວກັບຄຸນລັກສະນະຂອງອິນເຕີເຟດ, ອົງປະກອບຕ່າງໆ, ການນຳໃຊ້ລົດ, ເຄື່ອງມືທີ່ຕ້ອງການ, ການເຊື່ອມຕໍ່ສາຍໄຟ, ຂັ້ນຕອນການຕິດຕັ້ງ, ແລະຂັ້ນຕອນການເລີ່ມຕົ້ນ.
ກ່ອນview ຄຳແນະນຳໃນການຕິດຕັ້ງ Axxess CHTO-013 ສຳລັບລົດ Chrysler
ຄູ່ມືການຕິດຕັ້ງລະອຽດສຳລັບໂມດູນການໂຕ້ຕອບ Axxess CHTO-013, ອອກແບບມາສຳລັບລົດ Chrysler, Dodge, Jeep, Mitsubishi ແລະ Volkswagen ຕັ້ງແຕ່ປີ 2004 ເປັນຕົ້ນໄປ. ລວມມີຄຳແນະນຳກ່ຽວກັບສາຍໄຟ, ຄຸນສົມບັດຂອງຊຸດອຸປະກອນ, ແລະຂັ້ນຕອນການທົດສອບ.
ກ່ອນview AXXESS AXTO-TY2 ໂຕໂຍຕ້າ Amplifier ຄໍາແນະນໍາການຕິດຕັ້ງການໂຕ້ຕອບ
ຄູ່ມືການຕິດຕັ້ງລາຍລະອຽດສໍາລັບ AXXESS AXTO-TY2 ampການໂຕ້ຕອບ lifier, ອອກແບບສໍາລັບຍານພາຫະນະ Toyota ປີ 2012-Up. ກວມເອົາຄຸນສົມບັດ, ອົງປະກອບ, ຄໍາຮ້ອງສະຫມັກ, ການເຊື່ອມຕໍ່ສາຍໄຟ, ແລະຂັ້ນຕອນການຂຽນໂປຼແກຼມ.