1. ບົດແນະນຳ
This manual provides essential information for the safe and effective use of the Littelfuse Bussmann SC-30 Fuse. It covers product overview, safety guidelines, installation, and specifications. Please read this manual thoroughly before handling or installing the fuse.
2. ຂໍ້ມູນຄວາມປອດໄພ
WARNING: Electrical shock hazard. Always disconnect power before installing or replacing fuses. Installation should only be performed by qualified personnel.
- Ensure the power supply is completely disconnected and locked out before any work involving fuses.
- Never touch electrical components with wet hands or while standing on wet surfaces.
- ໃຊ້ fuses ກັບ vol ທີ່ຖືກຕ້ອງສະເຫມີtage ແລະ amperage ratings for the circuit they are protecting. Using an incorrect fuse can lead to equipment damage, fire, or personal injury.
- ບໍ່ bypass ຫຼື tamper ກັບຟິວ.
- ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເຫມາະສົມ (PPE), ເຊັ່ນ: ຖົງມື insulated ແລະແວ່ນຕາຄວາມປອດໄພ, ເມື່ອເຮັດວຽກກັບລະບົບໄຟຟ້າ.
3. ຜະລິດຕະພັນເກີນview
The Littelfuse Bussmann SC-30 is a Class G, time-delay cartridge fuse designed for general purpose basic protection against overcurrents. It is rated for 30 Amperes and suitable for both AC (480V) and DC (300V) applications. The time-delay characteristic allows for temporary overcurrents, such as motor starting surges, without blowing, while still providing protection against sustained overloads and short circuits.
ຮູບ 3.1: ດ້ານຫນ້າ view of the Bussmann SC-30 fuse, showing the green label with "BUSS Class G Fuse Type Ampere SC-30 Time-Delay" markings.
ຮູບ 3.2: ຂ້າງ view of the Bussmann SC-30 fuse, displaying detailed specifications including "General Purpose Basic Protection Time-Delay Class G Fuse SC-30 480Vac AC IR 100kA 300Vdc DC IR 10kA".
4. ການຕິດຕັ້ງ
Follow these steps for proper installation of the SC-30 fuse:
- ກວດສອບຄວາມເຂົ້າກັນໄດ້: Ensure the SC-30 fuse matches the required amperage ແລະ voltage ratings for your specific electrical circuit and equipment. Refer to your equipment's documentation.
- ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: Absolutely ensure all power to the circuit where the fuse will be installed is turned off and locked out. Use a voltage tester to confirm the circuit is de-energized.
- ຖອດຟິວເກົ່າອອກ (ຖ້າມີ): Carefully remove the existing fuse from its holder. Note its orientation if it's a specific type.
- ໃສ່ຟິວໃໝ່: Insert the Bussmann SC-30 fuse into the fuse holder. Ensure it is seated firmly and correctly. Do not force the fuse.
- ຟື້ນຟູພະລັງງານ: Once the fuse is securely in place and all safety checks are complete, restore power to the circuit.
- ການທໍາງານຂອງການທົດສອບ: Verify that the protected equipment operates as expected.
Note: Fuses are designed for one-time use. A blown fuse must be replaced with a new one of the identical type and rating.
5. ຫຼັກການດຳເນີນງານ
The Bussmann SC-30 fuse functions as a sacrificial device designed to protect electrical circuits from overcurrent conditions. When the current flowing through the circuit exceeds the fuse's 30 Ampere rating for a sustained period (due to an overload) or instantaneously (due to a short circuit), the metallic element inside the fuse melts, creating an open circuit. This action interrupts the flow of electricity, preventing damage to wiring, equipment, and reducing the risk of fire.
As a time-delay fuse, the SC-30 is engineered to withstand temporary current surges that are common during the startup of motors or other inductive loads. This prevents nuisance blowing while still providing reliable protection against harmful overcurrents.
6. ບໍາລຸງຮັກສາ
Fuses are generally maintenance-free components. However, periodic visual inspection of the fuse and its holder is recommended, especially in environments prone to vibration, dust, or extreme temperatures. Look for any signs of physical damage, discoloration, or loose connections. If any issues are observed, disconnect power and address them immediately.
7. ການແກ້ໄຂບັນຫາ
If a circuit protected by an SC-30 fuse stops functioning, the fuse may have blown. Follow these troubleshooting steps:
- ລະບຸຟິວເປົ່າ: Disconnect all power to the circuit. Visually inspect the fuse for a broken filament or discoloration, which indicates it has blown. Some fuse holders may have an indicator.
- Determine Cause: A blown fuse indicates an overcurrent condition. Investigate the circuit for potential causes such as:
- Overloaded circuit (too many devices drawing power).
- Short circuit in wiring or equipment.
- Faulty equipment connected to the circuit.
- ປ່ຽນ Fuse: Once the cause of the overcurrent is identified and rectified, replace the blown fuse with a new Littelfuse Bussmann SC-30 fuse. Never replace it with a fuse of a different rating.
- ການເປົ່າລົມຊ້ຳໆ: If the fuse blows repeatedly after replacement, it indicates a persistent problem in the circuit or equipment. Consult a qualified electrician to diagnose and repair the issue.
8. ຂໍ້ມູນຈໍາເພາະ
| ຂໍ້ມູນຈໍາເພາະ | ມູນຄ່າ |
|---|---|
| ຍີ່ຫໍ້ | Littelfuse (Bussmann) |
| ໝາຍເລກຕົວແບບ | SC-30 |
| Ampການຈັດອັນດັບ erage | 30 Amps |
| AC Voltage ການຈັດອັນດັບ | 480 ວາ |
| ຊິງຕັນດີຊີ Voltage ການຈັດອັນດັບ | 300 ວີດີຊີ |
| ການຈັດອັນດັບການຂັດຂວາງ (AC) | 100 ກ |
| ການຈັດອັນດັບການຂັດຂວາງ (DC) | 10 ກ |
| ປະເພດຟິວ | Class G, Time-Delay |
| ວັດສະດຸ | ທອງແດງ |
| ປະເພດການຕິດຕັ້ງ | Surface Mount (Cartridge) |
| ນ້ໍາຫນັກລາຍການ | 0.317 ອອນ |
| ຂະໜາດແພັກເກັດ | 2.56 x 1.1 x 0.43 ນິ້ວ |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and technical support regarding your Littelfuse Bussmann SC-30 fuse, please refer to the official Littelfuse webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.
Littelfuse Official Webເວັບໄຊ: www.littelfuse.com
