ແນະນຳ
This manual provides essential instructions for the proper setup, operation, and maintenance of your Intermec SR30 Linear Imager RS232 Barcode Scanner. Please read this manual thoroughly before using the device to ensure optimal performance and to prevent damage.
The Intermec SR30 is a high-performance linear imager designed for reliable barcode scanning in various environments, connecting via an RS232 interface.
ຂໍ້ມູນຄວາມປອດໄພ
- ຢ່າໃຫ້ເຄື່ອງສະແກນຖືກອຸນຫະພູມ, ຄວາມຊຸ່ມຊື່ນ ຫຼື ແສງແດດໂດຍກົງ ຫຼື ແສງແດດທີ່ຮຸນແຮງເກີນໄປ.
- ຫຼີກລ່ຽງການເຮັດເຄື່ອງສະແກນຕົກ ຫຼື ເຮັດໃຫ້ມັນໄດ້ຮັບຜົນກະທົບທີ່ຮຸນແຮງ.
- Do not attempt to open or modify the scanner. Refer all servicing to qualified personnel.
- Use only the power supply and cables provided or approved by Intermec.
- ຮັກສາປ່ອງຢ້ຽມສະແກນໃຫ້ສະອາດເພື່ອຮັບປະກັນການອ່ານບາໂຄດທີ່ຖືກຕ້ອງ.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າຊຸດຂອງທ່ານມີລາຍການດັ່ງຕໍ່ໄປນີ້:
- Intermec SR30 Linear Imager Barcode Scanner
- ສາຍເຊື່ອມຕໍ່ RS232
- ຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ
- ເອກະສານ (ຄູ່ມືນີ້ ຫຼື ຄ້າຍຄືກັນ)
ຖ້າລາຍການໃດຂາດຫາຍໄປຫຼືເສຍຫາຍ, ກະລຸນາຕິດຕໍ່ຜູ້ສະຫນອງຂອງທ່ານທັນທີ.
ຕັ້ງຄ່າ
1. ການເຊື່ອມຕໍ່ເຄື່ອງສະແກນ
- Connect the RS232 Cable: Plug the RS232 connector of the interface cable into the corresponding serial port on your host computer or POS system.
- ເຊື່ອມຕໍ່ກັບເຄື່ອງສະແກນ: Plug the other end of the interface cable into the port at the base of the SR30 scanner. Ensure a secure connection.
- ເຊື່ອມຕໍ່ການສະຫນອງພະລັງງານ: Connect the power supply unit to the power port on the interface cable or directly to the scanner base, as applicable for your specific cable configuration. Plug the power supply into a standard electrical outlet.
2. ການເປີດເຄື່ອງເບື້ອງຕົ້ນ
Once connected, the scanner should power on automatically. Observe the indicator lights (typically an LED) for initial status. The scanner may emit a short beep to indicate it is ready for operation.
3. Basic Configuration (if required)
The SR30 scanner may require configuration for specific RS232 communication parameters (e.g., baud rate, data bits, parity) to match your host system. Refer to the detailed programming guide (often a separate document with programming barcodes) for advanced configuration. For basic operation, the default settings are often sufficient.
ການດໍາເນີນງານເຄື່ອງສະແກນ
1. ການສະແກນບາໂຄດ
- ເປົ້າໝາຍ: Point the scanning window of the SR30 at the barcode you wish to read. Ensure the entire barcode is within the scanner's field of view.
- ສະແກນ: Press and hold the trigger button (if applicable) or present the barcode to the scanner's window for automatic scanning.
- ການຢືນຢັນ: A successful scan is typically indicated by an audible beep and/or a change in the LED indicator light (e.g., green light). The barcode data will be transmitted to your host system.
2. ຄວາມເຂົ້າໃຈຕົວຊີ້ວັດ
- LED ສີຂຽວ: Indicates a successful barcode read.
- Red/Amber LED: May indicate an error, scanner busy, or awaiting input. Consult the full programming guide for specific error codes or patterns.
- Beep Sounds: Different beep patterns can indicate successful reads, errors, or configuration changes.
ບໍາລຸງຮັກສາ
ການເຮັດຄວາມສະອາດເຄື່ອງສະແກນ
- Regularly clean the scanning window with a soft, lint-free cloth dampຜະສົມດ້ວຍນ້ໍາຫຼືເຄື່ອງເຮັດຄວາມສະອາດອ່ອນໆ, ບໍ່ມີສານຂັດ.
- Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the scanner's surface.
- ໃຫ້ແນ່ໃຈວ່າເຄື່ອງສະແກນຖືກປິດແລ້ວກ່ອນການທຳຄວາມສະອາດ.
ການເກັບຮັກສາ
When not in use, store the scanner in a clean, dry environment away from direct sunlight and extreme temperatures.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງສະແກນບໍ່ເປີດ. | Power cable not connected; power outlet faulty; power supply unit failure. | Check all cable connections. Try a different power outlet. Ensure the power supply is functioning. |
| ເຄື່ອງສະແກນບໍ່ໄດ້ອ່ານບາໂຄດ. | Barcode damaged or poorly printed; scanning window dirty; incorrect symbology enabled; scanner not configured for host. | Ensure barcode is clear. Clean scanning window. Verify scanner configuration matches host system requirements. Try scanning a known good barcode. |
| Barcode data not appearing on host. | RS232 cable loose or faulty; incorrect RS232 communication settings (baud rate, parity); host application not ready. | Check RS232 cable connection. Verify RS232 settings on both scanner and host. Ensure host application is active and ready to receive input. |
ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: SR30
- ເລກສ່ວນ: 225-727-003 (Kit)
- ປະເພດເຄື່ອງສະແກນ: ຮູບພາບເສັ້ນຊື່
- ການໂຕ້ຕອບ: RS232
- ຜູ້ຜະລິດ: ອິນເມັກ
- ນ້ໍາຫນັກລາຍການ: 0.01 ounces (approximate, scanner only)
- ພະແນກ: ບາໂຄດ
- ASIN: B003T0WF3S
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Intermec webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
Contact your reseller or Intermec customer service for assistance with issues not covered in this manual.
