1. ບົດແນະນຳ
The Unify OpenStage 30 T is a digital system phone designed for business communication environments. It offers a range of features to enhance productivity and communication efficiency within a compatible Private Branch Exchange (PBX) system. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your OpenStage 30 T phone.
Figure 1: Unify OpenStage 30 T Digital Phone. This image displays the front view of the phone, highlighting its display, keypad, and function keys.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- 2-line monochrome graphic display
- 8 fixed function keys with LED indicators
- 8 programmable keys with LED indicators
- ປຸ່ມກົດຕົວເລກ
- Full Duplex Speakerphone for hands-free communication
2. ຕັ້ງຄ່າ
The OpenStage 30 T is a digital system phone that requires connection to a compatible Unify (formerly Siemens Enterprise Communications) PBX system. It is not designed for direct connection to a standard analog telephone line.
2.1 ການເຊື່ອມຕໍ່ໂທລະສັບ
- ເຊື່ອມຕໍ່ໂທລະສັບມືຖື: Plug the coiled cord from the handset into the designated port on the side or back of the phone base.
- ເຊື່ອມຕໍ່ສາຍສາຍ: Connect one end of the telephone line cord to the 'Line' port on the back of the OpenStage 30 T phone. Connect the other end to the appropriate digital extension port on your PBX system or wall jack provided by your system administrator.
- ການເຊື່ອມຕໍ່ພະລັງງານ: The OpenStage 30 T typically receives power directly from the digital line connection to the PBX. No separate power adapter is usually required. If your specific setup requires an external power supply (not included), connect it to the designated power port and then to an electrical outlet.
2.2 ການບູດຂຶ້ນເບື້ອງຕົ້ນ
Once connected, the phone will power on automatically. The display will show a boot-up sequence, and then typically display the date, time, and your extension number. If the phone does not power on or displays an error, consult the Troubleshooting section or your system administrator.
3. ຄໍາແນະນໍາການດໍາເນີນງານ
3.1 ໂທອອກ
- Lift Handset: ຍົກມືຖືຂຶ້ນ ຫຼືກົດປຸ່ມ ລໍາໂພງ key to activate the speakerphone.
- ໝາຍເລກໂທ: Use the numeric keypad to dial the desired telephone number.
- ສິ້ນສຸດການໂທ: ປ່ຽນເຄື່ອງມືຫຼືກົດປຸ່ມ ລໍາໂພງ ກົດປຸ່ມອີກເທື່ອຫນຶ່ງເພື່ອວາງສາຍ.
3.2 ການຮັບສາຍ
- ເມື່ອໂທລະສັບດັງຂຶ້ນ, ຍົກມືຖືຂຶ້ນ ຫຼືກົດປຸ່ມ ລໍາໂພງ key to answer.
3.3 ການໃຊ້ປຸ່ມຟັງຊັນຄົງທີ່
The OpenStage 30 T features 8 fixed function keys, typically labeled with icons or common functions such as ຂໍ້ຄວາມ, ຖື, ໂອນ, ກອງປະຊຸມ, ແດງຄືນ, ແລະ ປິດສຽງ. Refer to the icons on your specific phone for their exact functions. Press a key to activate its corresponding function.
3.4 Using Programmable Keys
The 8 programmable keys can be configured by your system administrator for various functions, such as speed dial numbers, line appearances, or advanced features. The LED next to each key indicates its status (e.g., busy, ringing, available). Press a programmable key to activate its assigned function.
3.5 Speakerphone Operation
- ເພື່ອເປີດໃຊ້ລຳໂພງໃນລະຫວ່າງການໂທ, ໃຫ້ກົດປຸ່ມ ລໍາໂພງ ກະແຈ.
- ເພື່ອປ່ຽນກັບຄືນໄປຫາຫູຟັງ, ໃຫ້ຍົກຫູຟັງຂຶ້ນ.
- ເພື່ອວາງສາຍໂທເຂົ້າດ້ວຍລຳໂພງ, ໃຫ້ກົດປຸ່ມ ລໍາໂພງ ຄີອີກເທື່ອຫນຶ່ງ.
3.6 ການຄວບຄຸມປະລິມານ
Use the dedicated volume control keys (usually marked with '+' and '-') to adjust the handset, speakerphone, or ringer volume during a call or when the phone is idle.
4. ບໍາລຸງຮັກສາ
4.1 ການທໍາຄວາມສະອາດໂທລະສັບ
- Disconnect the phone from the line if possible before cleaning.
- ໃຊ້ອ່ອນ, ເລັກນ້ອຍ damp cloth to wipe the exterior surfaces of the phone.
- Do not use abrasive cleaners, solvents, or strong chemical solutions, as these can damage the phone's finish and electronic components.
- ຫຼີກເວັ້ນການໄດ້ຮັບຄວາມຊຸ່ມຊື່ນເຂົ້າໄປໃນຊ່ອງເປີດໃດໆ.
4.2 ການເບິ່ງແຍງທົ່ວໄປ
- ຮັກສາໂທລະສັບໃຫ້ຫ່າງຈາກແສງແດດໂດຍກົງ, ແຫຼ່ງຄວາມຮ້ອນ, ແລະຄວາມຊຸ່ມຊື່ນຫຼາຍເກີນໄປ.
- ຫຼີກລ້ຽງການວາງໂທລະສັບຫຼືການຮັບຜົນກະທົບທີ່ເຂັ້ມແຂງ.
5. ການແກ້ໄຂບັນຫາ
This section addresses common issues you might encounter with your OpenStage 30 T phone. As this is a system phone, many issues may require intervention from your PBX system administrator.
5.1 No Power / Display Off
- Check Line Connection: Ensure the telephone line cord is securely connected to both the phone and the wall jack/PBX port.
- Consult Administrator: If the connection is secure and the phone still has no power, there might be an issue with the digital line or the PBX system. Contact your system administrator.
5.2 ບໍ່ມີສຽງໂທອອກ
- Check Handset/Speakerphone: Ensure the handset is properly seated or the speakerphone is activated.
- Verify Line Connection: Confirm the line cord is firmly connected.
- System Issue: A lack of dial tone often indicates an issue with the PBX system or the specific extension. Contact your system administrator.
5.3 ຄຸນນະພາບການໂທບໍ່ດີ
- ປັບລະດັບສຽງ: Use the volume keys to adjust the listening volume.
- Check Handset/Speakerphone: Ensure the handset is clean and free from obstructions, or that you are speaking clearly into the speakerphone microphone.
- Line Interference: Interference can sometimes be caused by other electronic devices. If the issue persists, report it to your system administrator.
5.4 Programmable Keys Not Working
- Configuration Issue: Programmable keys are configured by the PBX system. If they are not functioning as expected, contact your system administrator to verify their programming.
6. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຍີ່ຫໍ້ | ເປັນເອກະພາບ |
| ຜູ້ຜະລິດ | Siemens AG |
| ໝາຍເລກຕົວແບບ | L30250-F600-C187 |
| ຂະໜາດສິນຄ້າ | 22 x 7 x 24 ຊມ (8.66 x 2.76 x 9.45 ນິ້ວ) |
| ນ້ໍາຫນັກລາຍການ | 782 ກຣາມ (1.72 ປອນ) |
| ປີຕົວແບບ | 2010 |
| ຄຸນສົມບັດເພີ່ມເຕີມ | System Phone |
| ວັດສະດຸ | ພາດສະຕິກ |
| ຕ້ອງໃຊ້ແບັດເຕີຣີ | ບໍ່ |
| ຄວາມອາດສາມາດບັນທຶກ | 17 Minutes (if applicable via system features) |
| ພອດ USB ທັງໝົດ | 1 (for specific system integrations, not for general user access) |
7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
7.1 ຂໍ້ມູນການຮັບປະກັນ
Specific warranty terms for the Unify OpenStage 30 T are typically provided by the vendor or system integrator at the time of purchase. Please refer to your purchase documentation or contact your supplier for detailed warranty information.
7.2 ສະຫນັບສະຫນູນດ້ານວິຊາການ
For technical assistance, configuration changes, or advanced troubleshooting, please contact your organization's IT department or the system administrator responsible for your Unify PBX system. They are equipped to provide support tailored to your specific system setup.
