Advance UZ964

Advance Kent Euroclean UZ964 Hip Vac Vacuum Bags

Instruction Manual for Models UZ964, UZ964-H, UZ964-SR, UZ964-400

ແນະນຳ

This manual provides essential instructions for the proper installation, operation, and maintenance of Advance / Kent Hip Vac vacuum cleaner bags. These bags are designed for use with Advance and Euroclean Kent UZ964 series Hip Vac models, including UZ 964, UZ 964-H, UZ 964-SR, and UZ 964-400. Utilizing Micro-Plus micro-filtration media, these bags are engineered to capture up to 99% of particles smaller than 1 micron, ensuring efficient dust and allergen retention.

ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

ເນື້ອໃນຊຸດ

ແຕ່ລະຊຸດປະກອບມີລາຍການຕໍ່ໄປນີ້:

Advance Kent Euroclean UZ964 Hip Vac Vacuum Bags and filter packaging

This image displays the packaging for the Advance Kent Euroclean UZ964 Hip Vac Vacuum Bags, showing a pack of ten bags and one filter.

ຄໍາແນະນໍາການຕິດຕັ້ງ

Installing the Vacuum Bag

  1. ປິດພະລັງງານ: Ensure the vacuum cleaner is unplugged from the electrical outlet before proceeding.
  2. ເປີດຊ່ອງ: Locate and open the vacuum bag compartment on your Advance / Kent Hip Vac vacuum cleaner. Refer to your vacuum cleaner's user manual for specific instructions on opening the compartment.
  3. ເອົາຖົງເກົ່າອອກ (ຖ້າມີ): Carefully remove the full or old vacuum bag. Seal the opening of the old bag if possible to prevent dust escape during disposal.
  4. ໃສ່ຖົງໃໝ່: Take a new Advance / Kent Hip Vac vacuum bag. Align the bag's cardboard collar or rubber gasket with the inlet tube inside the vacuum compartment. Push firmly until the bag is securely seated and sealed.
  5. ຊ່ອງປິດ: Close the vacuum bag compartment securely. Ensure it latches properly to maintain suction and prevent dust leakage.

ຄໍາແນະນໍາການດໍາເນີນງານ

ການນໍາໃຊ້ທົ່ວໄປ

Once the new vacuum bag is installed, your Advance / Kent Hip Vac vacuum cleaner is ready for operation. Plug the vacuum cleaner into a suitable electrical outlet and turn it on. The Micro-Plus filtration system in these bags will effectively capture fine dust and debris during cleaning. Monitor the vacuum's performance; a decrease in suction power often indicates a full bag or a clogged filter.

ບໍາລຸງຮັກສາ

ການປ່ຽນຖົງສູນຍາກາດ

It is recommended to replace the vacuum bag when it is approximately two-thirds full, or when you notice a significant reduction in suction power. Overfilling the bag can strain the vacuum motor and reduce cleaning efficiency.

  1. ປິດພະລັງງານ: ຖອດເຄື່ອງດູດຝຸ່ນອອກຈາກແຫຼ່ງພະລັງງານ.
  2. ເປີດຊ່ອງ: Open the vacuum bag compartment.
  3. ເອົາກະເປົ໋າອອກໝົດ: Carefully detach the full bag from the inlet tube. Many bags have a self-sealing collar; if not, pinch the opening closed to prevent dust from escaping.
  4. ຖິ້ມ: Dispose of the full bag in a sealed trash receptacle.
  5. ຕິດຕັ້ງຖົງໃໝ່: Follow the "Installing the Vacuum Bag" steps outlined in the Setup section to install a fresh bag.

ການທົດແທນການກັ່ນຕອງ

The included filter should be replaced periodically, typically with every 5-10 bag changes, or if it appears visibly dirty or damaged. Refer to your vacuum cleaner's manual for the exact location and replacement procedure for the filter. Ensure the replacement filter is compatible with your specific Hip Vac model.

ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ການດູດຊຶມຫຼຸດລົງຖົງສູນຍາກາດເຕັມແລ້ວ.ປ່ຽນຖົງສູນຍາກາດ.
ການດູດຊຶມຫຼຸດລົງການກັ່ນຕອງຖືກອຸດຕັນ.ປ່ຽນຕົວກອງ.
ຂີ້ຝຸ່ນຮົ່ວຈາກສູນຍາກາດBag not installed correctly.Ensure the bag's collar is securely sealed around the inlet tube.
ຂີ້ຝຸ່ນຮົ່ວຈາກສູນຍາກາດBag is damaged.Replace with a new, undamaged bag.

ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນການຮັບປະກັນ

These vacuum bags and filters are manufactured to high-quality standards. For specific warranty details regarding manufacturing defects or product performance, please refer to the packaging or contact the retailer from whom the product was purchased. Keep your proof of purchase for any warranty claims.

ການຊ່ວຍເຫຼືອລູກຄ້າ

If you have any questions regarding the installation, compatibility, or performance of your Advance / Kent Hip Vac vacuum bags, please contact your retailer or the manufacturer's customer service department. Always provide the product's model number and any relevant purchase information when seeking support.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - UZ964

ກ່ອນview ລາຍການອາໄຫຼ່ Advance Adgility 6XP, 10XP
Official spare parts catalog for Advance Adgility 6XP and 10XP vacuum cleaner models. Features detailed diagrams, part numbers, and descriptions for all components, including electrical parts, motor, container, harness, filters, nozzles, and hoses.
ກ່ອນview Advance AquaClean 12/15/18 ລາຍຊື່ພາກສ່ວນ ແລະແຜນວາດ
ເອກະສານນີ້ສະຫນອງບັນຊີລາຍຊື່ຊິ້ນສ່ວນທີ່ສົມບູນແບບແລະແຜນວາດການປະກອບສໍາລັບເຄື່ອງເຮັດຄວາມສະອາດຜ້າພົມ Advance AquaClean 12/15/18, ກວມເອົາແບບຈໍາລອງ 56264058, 56264001, 56264059, 56264060, 56264061 ແລະລະບົບຕ່າງໆ 56264062 ແລະລາຍລະອຽດເທິງ. ມືຈັບຕ່ໍາ, console, chassis, ແປງ, ການແກ້ໄຂ, ການຟື້ນຟູ, decals, ແລະຊຸດຊັ້ນແຂງທາງເລືອກ.
ກ່ອນview Advance VU500 Upright Vacuum Cleaner Spare Parts List
Detailed spare parts list for the Advance VU500 12-inch and 15-inch SMU US upright vacuum cleaner models, including diagrams and part numbers.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ສະຖານີໄຟຟ້າແບບພົກພາ ADVANCE 1000
ຄູ່ມືຜູ້ໃຊ້ທີ່ຄົບຖ້ວນສຳລັບສະຖານີໄຟຟ້າແບບພົກພາ ADVANCE 1000, ເຊິ່ງກວມເອົາຄຳແນະນຳດ້ານຄວາມປອດໄພ, ລາຍລະອຽດຄຸນສົມບັດ, ຄູ່ມືການໃຊ້ງານ, ລາຍລະອຽດທົ່ວໄປ, ການບຳລຸງຮັກສາ, ການແກ້ໄຂບັນຫາ, ແລະ ຄຳເຕືອນຕ່າງໆ.
ກ່ອນview ເຄື່ອງຂັດຜິວ Advance SC6000: ຄຳແນະນຳສຳລັບການນຳໃຊ້
ຄູ່ມືທີ່ຄົບຖ້ວນສົມບູນສຳລັບການນຳໃຊ້ ແລະ ການບຳລຸງຮັກສາເຄື່ອງຂັດຖູ Advance SC6000 Rider Scrubber, ເຊິ່ງກວມເອົາຄວາມປອດໄພ, ອົງປະກອບຂອງເຄື່ອງຈັກ, ການເຮັດວຽກ ແລະ ການແກ້ໄຂບັນຫາ.
ກ່ອນview Advance SC450 Parts List and Diagrams
Comprehensive parts list and technical diagrams for the Advance SC450 walk-behind floor scrubber. Includes detailed component breakdowns, part numbers, quantities, and ordering information for maintenance and repair.