ແນະນຳ
The MXR Bass Envelope Filter M82 is an analog effect pedal designed specifically for bass guitar, delivering classic envelope filter sounds. It features independent controls for dry and effect signals, allowing for precise blending without sacrificing low-end frequencies. The pedal's wide range of filter tones can be adjusted using the Decay and Q controls, while the Sensitivity knob adapts the pedal's response to your playing dynamics and bass type (passive or active). Built with robust power supply circuitry for protection against voltage issues and true-bypass switching to maintain signal integrity, the M82 is housed in a durable, compact aluminum enclosure.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- Bypass Footswitch with LED: Engages or disengages the effect, with an LED indicator for status.
- Dry Control: Adjusts the level of the unaffected bass signal.
- ການຄວບຄຸມ FX: Adjusts the level of the effected signal.
- Decay Control: Shapes the filter's sweep time.
- "Q" Control: Adjusts the filter's resonance or intensity.
- ການຄວບຄຸມຄວາມອ່ອນໄຫວ: Tailors the filter's response to playing dynamics and instrument output.
- True Bypass Switching: Preserves original tone when the effect is off.
- ເຮືອນອາລູມິນຽມທົນທານ: Compact and road-ready design.
ຄູ່ມືການຕິດຕັ້ງ
Powering Pedal ໄດ້
The MXR Bass Envelope Filter M82 requires an external 9-volt DC power adapter (e.g., Dunlop ECB003) with a center-negative polarity. This pedal does not have an internal battery compartment. Ensure the power source meets the pedal's requirements to prevent damage.
ການເຊື່ອມຕໍ່ Pedal ຂອງທ່ານ
- ເຊື່ອມຕໍ່ guitar bass ຂອງທ່ານກັບ ປ້ອນຂໍ້ມູນ jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- ເຊື່ອມຕໍ່ ອອກ ແຈັກຢູ່ເບື້ອງຊ້າຍຂອງກະບະໄປຫາຂອງທ່ານ ampເຄື່ອງເພີ່ມສັນຍານ ຫຼື ກະເບື້ອງຕໍ່ໄປໃນລະບົບຕ່ອງໂສ້ສັນຍານຂອງທ່ານໂດຍໃຊ້ສາຍເຄື່ອງມືຂະໜາດ 1/4 ນິ້ວອີກອັນໜຶ່ງ.
- Connect a 9-volt power adapter to the 9V jack input ພະລັງງານ.
ຮູບພາບ: ຫລັງ view of the MXR Bass Envelope Filter M82 pedal. This image highlights the 1/4-inch input jack, the 1/4-inch output jack, and the 9V power input jack, along with regulatory markings. This is where you connect your instrument, amplifier, ແລະການສະຫນອງພະລັງງານ.
ຮູບພາບ: ຂ້າງ view of the MXR Bass Envelope Filter M82 pedal, clearly showing the 1/4-inch output jack. This jack connects to your amplifier ຫຼື pedal ຕໍ່ໄປໃນລະບົບຕ່ອງໂສ້ສັນຍານຂອງທ່ານ.
ຮູບພາບ: ຂ້າງ view of the MXR Bass Envelope Filter M82 pedal, clearly showing the 1/4-inch input jack. Your bass guitar connects here.
ຄໍາແນະນໍາການດໍາເນີນງານ
ຮູບພາບ: ເທິງ view of the MXR Bass Envelope Filter M82 pedal, displaying all control knobs (Dry, FX, Decay, Q, Sensitivity) and the footswitch with its LED indicator. This is the primary interface for adjusting the pedal's sound.
ການຄວບຄຸມview
- ປຸ່ມ DRY:
- Controls the volume of your unaffected, direct bass signal. Use this to retain your instrument's natural low-end and blend it with the effect.
- ປຸ່ມ FX:
- Controls the volume of the envelope filter effect signal. Adjust this to determine how prominent the filter sound is in your mix.
- ບິດ DECAY:
- Adjusts the speed at which the filter sweep closes. Turning it clockwise results in a slower, longer sweep, while counter-clockwise settings produce a faster, snappier sweep.
- Q Knob:
- Determines the intensity or resonance of the filter effect. Higher 'Q' settings create a more pronounced, vocal-like "wah" sound, while lower settings are more subtle.
- SENSITIVITY Knob:
- Sets the threshold for the envelope filter's response to your playing dynamics. Adjust this to match your bass's output level (passive or active) and your picking/plucking attack. Turning it clockwise increases sensitivity, making the filter react to lighter playing.
- ຕີນສະວິດ:
- Toggles the effect on and off. The adjacent LED illuminates when the effect is active.
Achieving Desired Tones
- Funk Tones: Start with high Sensitivity, moderate Q, and a fast Decay. Adjust Dry/FX to taste.
- Subtle Filter: Use lower Q and Sensitivity settings, with a higher Dry mix.
- Long Sweeps: Increase the Decay knob for a slower, more drawn-out filter movement.
- Experiment with the Sensitivity knob to find the sweet spot where the filter responds naturally to your playing style and instrument's output.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າປຽກແຫ້ງເພື່ອເຮັດຄວາມສະອາດດ້ານນອກຂອງ pedal. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ການເກັບຮັກສາ: ເກັບຮັກສາກະບະໄວ້ໃນສະພາບແວດລ້ອມແຫ້ງ, ຫ່າງຈາກອຸນຫະພູມ ແລະ ຄວາມຊຸ່ມຊື່ນທີ່ສຸດ.
- ການສະຫນອງພະລັງງານ: Always use a regulated 9V DC power supply with a center-negative polarity. Using an incorrect power supply can damage the unit.
- ການເຊື່ອມຕໍ່: Ensure all cables are securely connected to prevent signal loss or intermittent operation.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີສຽງເມື່ອຕັ້ງແດມເກລ. |
|
|
| Effect is too subtle or not responding. |
|
|
| Effect is too harsh or overwhelming. |
|
|
| Loss of low-end frequencies. | Dry knob set too low. | Increase the Dry knob to blend in more of your original bass signal. |
ຂໍ້ມູນຈໍາເພາະ
| ໝາຍເລກຕົວແບບ | M82 |
| ນ້ໍາຫນັກລາຍການ | 10.9 ອອນສ໌ (ປະມານ 309 ກຣາມ) |
| ຂະໜາດສິນຄ້າ | 6 x 4.5 x 2.5 ນິ້ວ (ປະມານ 15.24 x 11.43 x 6.35 ຊມ) |
| ແຫຼ່ງພະລັງງານ | 9V DC (external power adapter required, center-negative) |
| ສະບັບtage | 9.00V |
| ການໂຕ້ຕອບຮາດແວ | 1/4-inch Audio Input/Output |
| ຮູບແບບສັນຍານ | ອະນາລັອກ |
| ວັດສະດຸທີ່ຢູ່ອາໄສ | Durable Aluminum |
| ຊື່ສີ | ສີມ່ວງ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and technical support, please refer to the official MXR webເວັບໄຊ ຫຼືຕິດຕໍ່ຕົວແທນຈໍາໜ່າຍທີ່ໄດ້ຮັບອະນຸຍາດຂອງທ່ານ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.
ຊັບພະຍາກອນອອນໄລນ໌: Visit the official MXR webເວັບໄຊ
