System Sensor RTS151KEY Remote Test and Reset Station with Key

1. ຜະລິດຕະພັນເກີນview

The System Sensor RTS151KEY is a remote test and reset station designed for use with compatible duct smoke detectors. This device allows for convenient testing and resetting of the associated smoke detector from a remote location, eliminating the need to access the detector directly within the ductwork. It features a key-operated switch for secure operation.

ຮູບ 1.1: ດ້ານຫນ້າ view of the System Sensor RTS151KEY Remote Test and Reset Station, showing the keyhole, reset, and test labels.

2. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

ຄຳເຕືອນ:

• Installation and wiring must be performed by qualified personnel in accordance with all local codes and authorities having jurisdiction.
• ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະໃຫ້ບໍລິການ ຫຼືຕິດຕັ້ງອຸປະກອນນີ້.
• This device is part of a fire alarm system. Proper functioning is critical for life safety. Do not modify or tamper ກັບອຸປະກອນ.
• Ensure all connections are secure and correct as per the wiring diagrams.
• Do not paint this fire alarm device.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ມີ​ຢູ່​ແລະ​ບໍ່​ໄດ້​ຮັບ​ຄວາມ​ເສຍ​ຫາຍ​ໃນ​ເວ​ລາ​ທີ່​ເປີດ​ຊຸດ​:

• System Sensor RTS151KEY Remote Test and Reset Station
• Keys (typically two)
• Installation and Wiring Instructions (manual)

Figure 3.1: Included keys for operating the RTS151KEY station.

ຮູບທີ 3.2: ຕົວຢ່າງample of the included installation and wiring instructions.

4. ການຕິດຕັ້ງ ແລະ ສາຍໄຟ

The RTS151KEY is designed for surface mounting. Ensure the mounting location is easily accessible for testing and resetting, and is within the specified wiring distance from the associated duct smoke detector.

4.1 ການຕິດຕັ້ງ

1. Select a suitable mounting location, typically near the duct smoke detector or in a control room.
2. Secure the backplate of the RTS151KEY to the wall or surface using appropriate screws.
3. Ensure the device is mounted securely and level.

4.2 ສາຍໄຟ

Refer to the wiring diagram provided with your specific duct smoke detector and the RTS151KEY manual for precise connections. The RTS151KEY typically connects to the detector's remote test/reset terminals and power terminals.

ຮູບ 4.1: ດ້ານຫລັງ view of the RTS151KEY, showing terminal block connections for wiring.

• Connect the power supply (DC ONLY) to the designated terminals.
• Connect the remote test/reset wires from the duct smoke detector to the corresponding terminals on the RTS151KEY.
• Ensure all wiring connections are tight and properly insulated.
• After wiring, attach the front cover of the RTS151KEY to the mounted backplate.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The RTS151KEY provides remote testing and resetting capabilities for compatible duct smoke detectors.

5.1 Testing the Duct Smoke Detector

1. Insert the key into the keyhole on the RTS151KEY.
2. ຫັນຄີໄປຫາ ທົດສອບ position. This will activate the test function of the connected duct smoke detector.
3. Observe the alarm indicator on the RTS151KEY (if present) and/or the main fire alarm control panel for confirmation of the alarm.
4. Once the test is complete, return the key to the center (normal) position and remove it.

5.2 Resetting the Duct Smoke Detector

1. After an alarm condition or a test, the duct smoke detector may need to be reset.
2. Insert the key into the keyhole on the RTS151KEY.
3. ຫັນຄີໄປຫາ ຣີເຊັດ position. This will initiate a reset sequence for the connected duct smoke detector.
4. Hold the key in the RESET position for a few seconds, then return it to the center (normal) position and remove it.
5. Confirm that the alarm condition has cleared on the main fire alarm control panel.

6. ບໍາລຸງຮັກສາ

The RTS151KEY is a low-maintenance device. Regular maintenance should focus on ensuring its physical integrity and proper function within the fire alarm system.

• ການກວດກາສາຍຕາ: Periodically inspect the unit for any signs of physical damage, loose connections, or environmental degradation.
• ການທົດສອບການທໍາງານ: Perform routine functional tests as required by local fire codes and the manufacturer's recommendations for the associated duct smoke detector. This typically involves using the test function of the RTS151KEY.
• ທໍາຄວາມສະອາດ: If necessary, gently wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7. ການແກ້ໄຂບັນຫາ

If the RTS151KEY or the connected duct smoke detector is not functioning as expected, consider the following common issues:

If problems persist, contact a qualified fire alarm technician or System Sensor technical support.

8. ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, please refer to the documentation provided with your purchase or contact System Sensor directly. System Sensor products are typically covered by a limited warranty against defects in materials and workmanship.

ສະຫນັບສະຫນູນດ້ານວິຊາການ

For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact System Sensor customer support. Contact information can usually be found on the manufacturer's official webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.

System Sensor Official Webເວັບໄຊ: www.systemsensor.com