adj SDC6

Elation Professional SDC-6 v2 DMX Controller User Manual

Model: SDC6

1. ບົດແນະນຳ

The Elation Professional SDC-6 v2 is a compact and versatile 6-channel DMX controller designed for easy operation of DMX-compatible lighting fixtures. It features six individual channel faders and one master fader, providing intuitive control over various lighting effects. This manual provides essential information for the safe and efficient use of your SDC-6 v2 controller, including setup, operation, maintenance, and troubleshooting.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

Please read these safety instructions carefully before operating the device. Failure to comply may result in damage to the unit, property, or personal injury.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ທີ່​ລະ​ບຸ​ໄວ້​ຂ້າງ​ລຸ່ມ​ນີ້​ແມ່ນ​ມີ​ຢູ່​ໃນ​ສະ​ພາບ​ທີ່​ດີ​ໃນ​ການ​ເປີດ​ຊຸດ​:

4. ຕັ້ງຄ່າ

Follow these steps to set up your SDC-6 v2 DMX controller:

  1. ການຈັດວາງ: Place the controller on a stable, flat surface away from excessive heat, moisture, or dust.
  2. ການເຊື່ອມຕໍ່ DMX: Connect the 3-pin DMX output connector of the SDC-6 v2 to the DMX input of your first DMX-compatible lighting fixture. If you have multiple fixtures, daisy-chain them by connecting the DMX output of the first fixture to the DMX input of the second, and so on.
  3. ການເຊື່ອມຕໍ່ພະລັງງານ: Insert the 9V power adapter into the power input jack on the controller. Plug the power adapter into a suitable electrical outlet. The power indicator LED on the controller should illuminate.
Elation SDC-6 v2 DMX Controller top view

ຮູບທີ 4.1: ທາງເທິງ view of the Elation SDC-6 v2 DMX Controller, showing the six channel faders, master fader, and power indicator.

Elation SDC-6 v2 DMX Controller battery compartment

ຮູບ 4.2: ຂ້າງ view of the Elation SDC-6 v2 DMX Controller, illustrating the battery compartment for optional portable power (battery not included for primary operation).

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The SDC-6 v2 provides straightforward control over your DMX lighting fixtures.

5.1. Channel Faders (1-6)

Each of the six numbered faders (1 through 6) corresponds to a DMX channel. Moving a fader up increases the DMX value for that channel (from 0 to 255), while moving it down decreases the value. The specific function of each channel (e.g., dimmer, color, strobe) depends on the DMX address and mode settings of your connected lighting fixture.

5.2. Master Fader

The Master fader controls the overall output level of all active DMX channels. Moving the Master fader down will dim or turn off all lights controlled by the individual channel faders, regardless of their individual settings. Moving it up will restore the output to the levels set by the individual channel faders.

5.3. ຕົວຊີ້ວັດພະລັງງານ

The Power indicator LED illuminates when the unit is receiving power, indicating it is ready for operation.

6. ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and reliable operation of your SDC-6 v2 controller.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your SDC-6 v2 controller, refer to the following common problems and solutions:

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ບໍ່ມີໄຟຊີ້ບອກພະລັງງານອະແດບເຕີໄຟຟ້າບໍ່ໄດ້ເຊື່ອມຕໍ່ ຫຼື ມີຂໍ້ບົກຜ່ອງ; ປລັກສຽບໄຟຟ້າບໍ່ໄດ້ໃຊ້ງານ.Ensure power adapter is securely connected to the unit and a working outlet. Test the outlet with another device.
Lights not responding to fadersIncorrect DMX connection; Master fader is down; DMX address mismatch on fixtures; fixture not in DMX mode.Check DMX cable connections. Ensure Master fader is up. Verify DMX addresses on fixtures match the channels being controlled. Confirm fixtures are set to DMX mode.
ການຄວບຄຸມຊົ່ວຄາວLoose DMX cable connection; DMX signal interference.Secure all DMX cable connections. Use high-quality DMX cables. Avoid running DMX cables parallel to power cables.

8. ຂໍ້ມູນຈໍາເພາະ

ຕົວແບບSDC6
ຍີ່ຫໍ້Elation Professional (ADJ)
ຊ່ອງ6 DMX Channels + 1 Master Fader
ຕົວເຊື່ອມຕໍ່ DMX3-pin XLR DMX Output
ການສະຫນອງພະລັງງານ9V DC (via included power adapter)
ຂະໜາດ (L x W x H)173 ມມ x 153 ມ. x 55 ມ. (6.81 x 6.02 ນິ້ວ x 2.17 ນິ້ວ)
ນ້ຳໜັກ1 ກິ​ໂລ (2.2 ປອນ​)
ສີດຳ
ປະເທດຕົ້ນກໍາເນີດຈີນ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elation Professional webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

For further assistance, you may contact the seller or manufacturer directly. Contact details are typically available on their respective websites or on your purchase invoice.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - SDC6

ກ່ອນview ADJ DMX FX512 Manuel d'Utilisateur
Ce manuel d'utilisateur fournit des ຄໍາແນະນໍາ détaillées sur l'utilisation, la configuration et la maintenance du contrôleur d'éclairage professional ADJ DMX FX512. Découvrez ses caractéristiques, ses fonctionnalités DMX ແລະ RDM, et comment optimiser vos spectacles lumineux.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ DMX ແຖບ ADJ Eco UV
ຄູ່ມືຜູ້ໃຊ້ສຳລັບ ADJ Eco UV Bar DMX, ເຊິ່ງກວມເອົາການຕັ້ງຄ່າ, ການດຳເນີນງານ, ການຄວບຄຸມ DMX, ຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພ, ແລະຂໍ້ມູນການຮັບປະກັນສຳລັບໂຄມໄຟມືອາຊີບນີ້.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ ADJ DMX Operator: ຄູ່ມືຄວບຄຸມໄຟສ່ອງສະຫວ່າງ
ຄູ່ມືຜູ້ໃຊ້ທີ່ຄົບຖ້ວນສຳລັບ ADJ DMX Operator, ລາຍລະອຽດການຄວບຄຸມ, ໜ້າທີ່ຕ່າງໆ, ສາກການຂຽນໂປຣແກຣມ ແລະ ການໄລ່, ການກຳນົດທີ່ຢູ່ DMX, ການເຮັດວຽກຂອງ MIDI, ແລະ ການແກ້ໄຂບັນຫາສຳລັບ stage ການ​ຄວບ​ຄຸມ​ແສງ​ສະ​ຫວ່າງ​.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ ADJ DMX FX512: ຕົວຄວບຄຸມໄຟ DMX ແບບມືອາຊີບ
ຄູ່ມືຜູ້ໃຊ້ສຳລັບ ADJ DMX FX512, ຕົວຄວບຄຸມ DMX ແບບຕິດຕັ້ງໃນແຣັກຂະໜາດ 19 ນິ້ວ ສຳລັບການນຳໃຊ້ໄຟສ່ອງສະຫວ່າງແບບມືອາຊີບ. ກວມເອົາຄຸນສົມບັດ, ການດຳເນີນງານ, ການຕັ້ງຄ່າ DMX, ແລະ ການບຳລຸງຮັກສາ.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ ADJ DMX Operator 384 Lighting Controller
ຄູ່​ມື​ການ​ນໍາ​ໃຊ້​ທີ່​ສົມ​ບູນ​ແບບ​ສໍາ​ລັບ ADJ DMX Operator 384​, ເປັນ​ອະ​ເນກ​ປະ​ສົງ DMX ແລະ MIDI lighting controller​. ຄູ່ມືນີ້ລາຍລະອຽດລັກສະນະຂອງຕົນ, ການຄວບຄຸມແຜງດ້ານຫນ້າແລະຫລັງ, ການດໍາເນີນງານ, ການຂຽນໂປລແກລມສາກ, ລໍາດັບການແລ່ນ, ການທໍາງານຂອງ MIDI, ແລະຂໍ້ກໍາຫນົດດ້ານວິຊາການ.
ກ່ອນview ADJ Encore Z7LP LED Par User Manual | Specifications, Installation, DMX Control
Comprehensive user manual for the ADJ Encore Z7LP LED par light, covering specifications, installation, DMX setup, RDM, WiFLY control, safety guidelines, and maintenance.