ແນະນຳ
This manual provides detailed instructions for the safe and efficient operation of your ROBBE Power Peak Compact 6s EQ battery charger. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
ສິນຄ້າເກີນview
The ROBBE Power Peak Compact 6s EQ is a versatile battery charger designed for various battery types, including LiPo, LiFe, LiIon, NiMH, NiCd, and Pb batteries. It features an integrated balancer for lithium batteries and a clear display for monitoring charging parameters.
ຮູບທີ 1: The ROBBE Power Peak Compact 6s EQ battery charger. This image shows the compact black charger unit with a blue backlit LCD screen and four red control buttons. A battery pack, white with red and black wires, is connected to the charger's output ports on the left side.
ຕັ້ງຄ່າ
1. ການຫຸ້ມຫໍ່ແລະການກວດກາ
- ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
- Inspect the charger and accessories for any signs of damage. If any damage is found, do not use the device and contact your retailer.
- Ensure all listed components are present: charger unit, power cable, and any included adapter cables.
2. ການເຊື່ອມຕໍ່ກັບພະລັງງານ
- Connect the provided power cable to the charger's power input port.
- Plug the other end of the power cable into a suitable AC power outlet (100-240V AC).
- The charger's display should illuminate, indicating it is powered on.
3. ການເຊື່ອມຕໍ່ຫມໍ້ໄຟ
- Identify the correct charging cable and balance board (if applicable) for your battery type.
- Connect the main charging leads from the battery to the charger's output ports, ensuring correct polarity (red to positive, black to negative).
- For lithium batteries, connect the balance lead from the battery to the corresponding balance port on the charger.
- ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພກ່ອນທີ່ຈະດໍາເນີນການ.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ການນໍາທາງເມນູ
The charger features a clear LCD display and four control buttons (typically labeled as 'Menu', 'Inc/Dec', 'Start/Stop').
- ປຸ່ມເມນູ: ກົດເພື່ອຮອບວຽນຜ່ານຕົວເລືອກເມນູຫຼັກ.
- Inc/Dec Buttons: Use to adjust values or navigate within a sub-menu.
- ປຸ່ມເລີ່ມ/ຢຸດ: Press and hold to start a charging process; press briefly to stop.
2. Selecting Battery Type and Charging Mode
- From the main menu, use the 'Menu' button to select the desired battery type (e.g., LiPo, NiMH).
- Once the battery type is selected, use the 'Inc/Dec' buttons to choose the charging mode (e.g., Charge, Balance Charge, Fast Charge, Storage, Discharge).
- Confirm your selection by pressing the 'Start/Stop' button.
3. Setting Charging Parameters
- After selecting the mode, the display will prompt you to set parameters such as charging current (Amps) and cell count (for lithium batteries).
- Use the 'Inc/Dec' buttons to adjust these values according to your battery's specifications. Always refer to your battery's manufacturer recommendations for safe charging rates.
- Press 'Start/Stop' to confirm each parameter.
4. Starting and Monitoring the Charge
- Once all parameters are set, press and hold the 'Start/Stop' button to begin the charging process. The charger may perform a pre-charge check.
- The display will show real-time charging information, such as current, voltage, charged capacity, and elapsed time.
- Monitor the charging process. If any unusual behavior (e.g., excessive heat, swelling) is observed, immediately stop the charge by pressing the 'Start/Stop' button.
- The charger will automatically stop when the battery is fully charged and emit an audible alert.
5. ຂໍ້ຄວນລະວັງຄວາມປອດໄພ
- Always charge batteries on a non-flammable surface and away from flammable materials.
- ຢ່າປະຖິ້ມແບັດທີ່ສາກໄວ້ໂດຍບໍ່ໃສ່ໃຈ.
- ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມໃນລະຫວ່າງການສາກໄຟ.
- ຢ່າພະຍາຍາມສາກແບັດເຕີຣີທີ່ເສຍຫາຍ ຫຼື ບວມ.
- Use only compatible battery types and charging parameters.
- Keep the charger away from moisture and extreme temperatures.
ບໍາລຸງຮັກສາ
1. ທໍາຄວາມສະອາດ
- Before cleaning, disconnect the charger from the power source and any connected batteries.
- ໃຊ້ຜ້າປຽກອ່ອນໆເຊັດດ້ານນອກຂອງສາຍສາກ.
- Do not use liquid cleaners or solvents, as these can damage the electronics.
- ໃຫ້ແນ່ໃຈວ່າຊ່ອງລະບາຍອາກາດບໍ່ມີຝຸ່ນແລະສິ່ງເສດເຫຼືອ.
2. ການເກັບຮັກສາ
- ເກັບຮັກສາເຄື່ອງສາກໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະອຸນຫະພູມທີ່ຮຸນແຮງ.
- ຮັກສາມັນໃຫ້ໄກຈາກເດັກນ້ອຍ.
- If storing for an extended period, disconnect all cables.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງສາກເປີດບໍ່ໄດ້. | ບໍ່ມີການສະຫນອງພະລັງງານ; ສາຍໄຟຜິດພາດ. | ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟ; ລອງຮ້ານອື່ນ. |
| Charging error message on display. | Incorrect battery type/settings; poor connection; damaged battery. | Verify battery type and parameters; check all connections; inspect battery for damage. |
| ແບັດເຕີຣີບໍ່ສາກ ຫຼື ສາກຊ້າ. | Low charging current setting; faulty battery. | Increase charging current (within battery limits); test with a different battery. |
| Charger or battery gets excessively hot. | Overcurrent; internal fault; damaged battery. | Immediately stop charging. Reduce current. Discontinue use of damaged battery. Seek professional assistance if charger is faulty. |
ຂໍ້ມູນຈໍາເພາະ
- ຍີ່ຫໍ້: SEAL
- ຕົວແບບ: Power Peak Compact 6s EQ
- ປະເພດຜະລິດຕະພັນ: ເຄື່ອງສາກແບັດເຕີຣີ
- ສີ: ດຳ
- ASIN: B003A69QN8
- ຜູ້ຜະລິດ: SEAL
- Note: Specific electrical parameters (e.g., input voltage range, charge current range, supported battery types/cell counts) are typically found on the device or its packaging. Please refer to those for detailed technical specifications.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ROBBE products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official ROBBE website. For technical support or service inquiries, please contact ROBBE customer service or your authorized dealer.
You can often find more information and support on the manufacturer's official webເວັບໄຊ: www.robbe.com (ໝາຍເຫດ: ນີ້ແມ່ນຕົວຍຶດບ່ອນ URL, please verify the actual manufacturer website for support).
