ແນະນຳ
This manual provides essential information for the proper setup, operation, and maintenance of your Fender '65 Princeton Reverb Guitar Amplifier. The '65 Princeton Reverb is a 15-watt all-tube amplifier designed for versatile use in various settings, from home practice to recording studios and small live performances. It features classic Fender tube tone, dynamic clean and overdriven sounds, and integrated long-spring reverb and tube vibrato effects.
ຄຸນນະສົມບັດທີ່ສໍາຄັນປະກອບມີ:
- 15-watt all-tube amplification with tube rectification.
- Equipped with a 1-10" Jensen C-10R, 8 Ohm, 40 Watt Speaker with Ceramic Magnet.
- Integrated long-spring Fender reverb and tube vibrato effects.
- ລວມມີ amplifier cover and a 2-button footswitch for remote control of reverb and vibrato.
ຮູບ 1: ດ້ານຫນ້າ view of the Fender '65 Princeton Reverb Guitar Amplifier, showcasing its classic black Tolex finish and silver grille cloth.
ຕັ້ງຄ່າ
- ການຫຸ້ມຫໍ່: ລະມັດລະວັງເອົາ ampຖອດອຸປະກອນອອກຈາກການຫຸ້ມຫໍ່. ເກັບຮັກສາອຸປະກອນການຫຸ້ມຫໍ່ທັງໝົດໄວ້ເພື່ອການຂົນສົ່ງ ຫຼື ການເກັບຮັກສາໃນອະນາຄົດ.
- ການຈັດວາງ: ຕໍາແໜ່ງ amplifier on a stable, level surface. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing the amplifier ຢູ່ໃກ້ກັບແຫຼ່ງຄວາມຮ້ອນຫຼືຢູ່ໃນແສງແດດໂດຍກົງ.
- ການເຊື່ອມຕໍ່ພະລັງງານ: ຮັບປະກັນ amplifier's power switch is in the 'OFF' position. Connect the supplied power cord to the amplifier's AC inlet and then to a grounded electrical outlet. Verify that the outlet provides the correct voltage ສໍາລັບພາກພື້ນຂອງທ່ານ.
- ການເຊື່ອມຕໍ່ເຄື່ອງມື: Connect your guitar or other instrument to one of the 'INSTRUMENTS' input jacks (Input 1 or Input 2) using a high-quality instrument cable. Input 1 typically offers higher sensitivity than Input 2.
- ການເຊື່ອມຕໍ່ສະວິດຕີນ (ທາງເລືອກ): If using the included 2-button footswitch, connect it to the 'FOOTSWITCH' jack on the amplifier's rear panel. This allows remote activation of the Reverb and Vibrato effects.
ຄໍາແນະນໍາການດໍາເນີນງານ
ຄຸ້ນເຄີຍກັບຕົວທ່ານເອງ amplifier's front panel controls:
- ສັບປ່ຽນພະລັງງານ: ຫັນ amplifier ON or OFF. Allow a brief warm-up period after turning on.
- ປະລິມານ: ຄວບຄຸມລະດັບຜົນຜະລິດໂດຍລວມຂອງ ampມີຊີວິດຊີວາ.
- ສຽງສູງ: Adjusts the high-frequency response. Turn clockwise for brighter tones, counter-clockwise for warmer tones.
- ເບສ: ປັບການຕອບສະໜອງຄວາມຖີ່ຕ່ຳ. ໝຸນຕາມເຂັມໂມງເພື່ອໃຫ້ມີສຽງເບດຫຼາຍຂຶ້ນ, ແລະ ໝຸນທວນເຂັມໂມງເພື່ອໃຫ້ມີສຽງເບດໜ້ອຍລົງ.
- ຄຳກິລິຍາ: Controls the intensity of the built-in spring reverb effect.
- ຄວາມໄວ: Adjusts the rate of the vibrato effect.
- ຄວາມເຂັ້ມ: Adjusts the depth or prominence of the vibrato effect.
ການເພີ່ມພະລັງງານເບື້ອງຕົ້ນ:
- Ensure all volume and effect controls are set to their minimum positions.
- Flip the power switch to the 'ON' position. The pilot light will illuminate.
- Allow approximately 30-60 seconds for the tubes to warm up.
- Slowly increase the 'Volume' control to your desired listening level. Adjust 'Treble' and 'Bass' for tonal preference.
- Experiment with the 'Reverb', 'Speed', and 'Intensity' controls to achieve desired effects.
ຮູບທີ 2: ພາຍໃນ view ຂອງ amplifier, highlighting the vacuum tubes which are crucial for its tonal characteristics.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າທີ່ອ່ອນໆ, ແຫ້ງເພື່ອເຮັດຄວາມສະອາດ ampພາຍນອກຂອງເຄື່ອງເຮັດຄວາມສະອາດ. ຫຼີກລ່ຽງນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ.
- ການດູແລທໍ່: Vacuum tubes have a finite lifespan. If you notice a decrease in performance, unusual noise, or a change in tone, tubes may need replacement. Consult a qualified technician for tube replacement.
- ການເກັບຮັກສາ: ເມື່ອບໍ່ໄດ້ໃຊ້, ເກັບມ້ຽນ amplifier in a dry, temperature-controlled environment. Use the included amplifier cover to protect it from dust and minor impacts.
- ການຂົນສົ່ງ: ປິດເຄື່ອງ ແລະ ຖອດປລັກໄຟສະເໝີ amplifier before moving it. Use proper lifting techniques due to its weight.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີສຽງອອກ | Power cord disconnected, instrument cable faulty, volume set to zero, speaker disconnected. | Check power and instrument cables. Ensure volume is up. Verify speaker connection. |
| ສຽງດັງ ຫຼື ສຽງດັງ | Ground loop, faulty instrument cable, proximity to other electronics, worn tubes. | Try a different outlet. Use shielded cables. Move away from other devices. Consult technician for tube inspection. |
| ສຽງອ່ອນ ຫຼືບິດເບືອນ | Worn tubes, incorrect instrument input, speaker damage. | Check instrument input. Consult technician for tube or speaker inspection. |
| Reverb or Vibrato not working | Footswitch disconnected or faulty, effect controls set to zero, internal component failure. | Check footswitch connection and functionality. Ensure effect controls are adjusted. Consult technician. |
If troubleshooting steps do not resolve the issue, contact Fender customer support or a qualified service technician.
ຂໍ້ມູນຈໍາເພາະ
- ຍີ່ຫໍ້: Fender
- ຕົວແບບ: '65 Princeton Reverb
- ໝາຍເລກຕົວແບບ: 2172000000
- ຜົນຜະລິດວັດtage: 15 ວັດ
- ລໍາໂພງ: 1-10" Jensen C-10R, 8 Ohm, 40 Watt Speaker with Ceramic Magnet
- ຂະໜາດຜະລິດຕະພັນ: 28.25 x 22.5 x 12.25 inches (Length x Height x Depth)
- ນ້ໍາຫນັກລາຍການ: 34 ປອນ
- ສີ: ດຳ
- ວັດສະດຸ: ໂລຫະ, ໄມ້
- ອຸປະກອນທີ່ເຂົ້າກັນໄດ້: ກີຕ້າ
- ຜູ້ຜະລິດ: Fender Musical Instruments Corp.
Figure 3: Dimensional diagram of the amplifier, indicating its length, height, and depth.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Fender products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your amplifier or visit the official Fender website. For technical support, service, or replacement parts, please contact Fender customer service through their official channels. Always provide your model number (2172000000) and serial number when seeking support.
ຊັບພະຍາກອນອອນໄລນ໌: For additional information, product registration, and support, visit the official Fender webເວັບໄຊ.
