SAMSON RS15HD

Samson Resound RS15HD 15" 2-Way Passive PA Cabinet

Model: RS15HD (02-06-004)

ແນະນຳ

The Samson Resound RS15HD is a high-performance 15-inch 2-way passive PA cabinet designed for professional audio applications. This speaker cabinet delivers powerful, full-range sound suitable for various venues, from live performances to houses of worship. Its robust construction ensures durability and consistent performance.

ຄຸນນະສົມບັດທີ່ສໍາຄັນ

  • Two-way passive PA speaker cabinet
  • 600 watt program power handling @ 8 ohms
  • Custom designed 15-inch low frequency driver
  • 1.5-inch titanium compression driver
  • Dual 1/4-inch and Speakon connections for versatile connectivity

ສິນຄ້າເກີນview

ດ້ານໜ້າ view of the Samson Resound RS15HD 15-inch 2-Way Passive PA Cabinet, showing the large woofer and smaller horn driver behind a protective metal grille, with the Samson logo at the bottom.

ຮູບ 1: ດ້ານຫນ້າ view of the Samson Resound RS15HD PA Cabinet. This image displays the robust black cabinet with a full metal grille protecting the 15-inch low-frequency driver and the high-frequency compression driver. The Samson logo is prominently displayed at the bottom center of the grille.

ຄູ່ມືການຕິດຕັ້ງ

Follow these steps to properly set up your Samson Resound RS15HD PA Cabinet:

  1. ການຈັດວາງ: Position the speaker on a stable, flat surface or a compatible speaker stand. Ensure the speaker is placed in a location that allows for optimal sound dispersion and avoids obstructions.
  2. ການເຊື່ອມຕໍ່: ເຊື່ອມຕໍ່ແຫຼ່ງສຽງຂອງເຈົ້າ (ເຊັ່ນ: amplifier, mixer) to the RS15HD using high-quality speaker cables. Utilize either the 1/4-inch or Speakon connections on the rear panel. Ensure secure connections to prevent signal loss or damage.
  3. ການຈັບຄູ່ impedance: Verify that the impedance of your amplifier matches the 8-ohm impedance of the RS15HD cabinet. Mismatched impedance can lead to poor performance or damage to your equipment.
  4. ການເພີ່ມພະລັງງານເບື້ອງຕົ້ນ: Before powering on your amplifier, ensure all volume controls are set to their minimum. Power on the amplifier, then slowly increase the volume to a desired listening level.

Important: Always ensure your amplifier is turned off before making any connections to the speaker cabinet.

ຄໍາແນະນໍາການດໍາເນີນງານ

The Samson Resound RS15HD is a passive speaker, meaning it requires an external amplifier to operate. Proper operation involves managing the amplifier's output and monitoring sound levels.

  • ການຄວບຄຸມລະດັບສຽງ: Adjust the volume primarily from your amplifier or mixer. Avoid pushing the amplifier into clipping (distortion), as this can damage the speaker.
  • ຄວາມສະເໝີພາບ: Use the equalizer on your mixer or amplifier to fine-tune the sound. The RS15HD is designed for a balanced frequency response, but minor adjustments may be needed for different acoustic environments.
  • ການຕິດຕາມ: Listen for any signs of distortion or stress from the speaker. If distortion occurs, reduce the input level or amplifier volume immediately.
  • Daisy-Chaining: If connecting multiple passive speakers, ensure the total impedance presented to the amplifier is within its safe operating range. Consult your amplifier's manual for specific guidelines.

ການບໍາລຸງຮັກສາແລະການດູແລ

To ensure the longevity and optimal performance of your RS15HD PA Cabinet, follow these maintenance guidelines:

  • ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the exterior of the cabinet. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • ການເກັບຮັກສາ: When not in use, store the speaker in a dry, cool environment, away from direct sunlight and extreme temperatures.
  • ການປົກປ້ອງ: Protect the speaker from physical impact and moisture. Consider using a protective cover during transport or storage.
  • ການກວດກາ: Periodically inspect the speaker grille, connections, and cabinet for any signs of wear or damage. Address any issues promptly.

ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ບໍ່ມີສຽງອອກ
  • ການເຊື່ອມຕໍ່ສາຍໄຟທີ່ວ່າງ ຫຼື ບໍ່ຖືກຕ້ອງ.
  • Amplifier not powered on or volume too low.
  • Input source issue.
  • Check all speaker and input cables; ensure they are securely connected.
  • ຢືນຢັນ amplifier power and increase volume gradually.
  • ທົດສອບດ້ວຍແຫຼ່ງສຽງທີ່ແຕກຕ່າງກັນ.
ສຽງບິດເບືອນ
  • Ampການຕັດລີເວີ (ການຂັບເກີນກຳນົດ).
  • ການຈັບຄູ່ impedance ບໍ່ຖືກຕ້ອງ.
  • ສ່ວນປະກອບຂອງລຳໂພງທີ່ເສຍຫາຍ.
  • ຫຼຸດຜ່ອນ amplifier volume or input gain.
  • ຮັບປະກັນ amplifier impedance ກົງກັບລໍາໂພງ (8 ohms).
  • Contact Samson support for service if distortion persists at normal levels.
ສຽງລົບກວນ
  • ສາຍໄຟຂັດຂ້ອງ.
  • ການເຊື່ອມຕໍ່ວ່າງ.
  • Replace speaker cables.
  • ກວດສອບ ແລະຮັບປະກັນການເຊື່ອມຕໍ່ທັງໝົດ.

ຂໍ້ມູນຈໍາເພາະ

ຊື່ຕົວແບບRS15HD
ໝາຍເລກຕົວແບບ02-06-004
ປະເພດລຳໂພງPassive PA Speaker Cabinet
ຂະຫນາດລໍາໂພງ15 Inches (Low Frequency Driver)
ຄົນຂັບຄວາມຖີ່ສູງ1.5-inch Titanium Compression Driver
ການຈັດການພະລັງງານຂອງໂປຣແກຣມ600 ວັດ
impedance8 ໂອມ
ການເຊື່ອມຕໍ່Dual 1/4-inch and Speakon
ການກໍ່ສ້າງຕູ້All-plywood
ນ້ໍາຫນັກລາຍການ44.5 ປອນ
ຍີ່ຫໍ້ແຊມຊັນ
UPC809164008637

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For detailed warranty information and technical support, please refer to the official Samson website or contact Samson customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Samson Technologies Contact Information:

  • Webເວັບໄຊ: www.samsontech.com
  • ສະຫນັບສະຫນູນ: ອ້າງອີງເຖິງພາກສະຫນັບສະຫນູນກ່ຽວກັບເຈົ້າຫນ້າທີ່ webເວັບໄຊທ໌ສຳລັບຄຳຖາມທີ່ຖືກຖາມເລື້ອຍໆ, ການດາວໂຫຼດ ແລະ ຕົວເລືອກການຕິດຕໍ່.