Winco Stainless Steel Juice Dispenser (Model 902) Instruction Manual

1. ບົດແນະນຳ

Thank you for choosing the Winco Stainless Steel Juice Dispenser, Model 902. This dispenser is designed for serving various beverages such as lemonade, orange juice, and iced tea in commercial or event settings. Its durable stainless steel construction and clear polycarbonate container ensure both longevity and an attractive presentation. This manual provides essential information for the safe and efficient use, assembly, cleaning, and maintenance of your dispenser.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• Capacity: Approximately 2.2 Gallons (8.3 Liters)
• Material: Stainless Steel body, clear polycarbonate juice container
• Integrated stainless steel ice chamber to keep beverages chilled without dilution
• ຖາດ drip ຖອດອອກໄດ້ສໍາລັບການທໍາຄວາມສະອາດງ່າຍ

2. ຂໍ້ມູນຄວາມປອດໄພ

Please read all safety instructions before operating the appliance to prevent injury or damage.

• ວາງເຄື່ອງແຈກຈ່າຍໃສ່ພື້ນຜິວທີ່ມີລະດັບຄວາມໝັ້ນຄົງສະເໝີ ເພື່ອປ້ອງກັນການບິດ.
• Do not fill the dispenser with hot liquids. This dispenser is designed for cold beverages only.
• Exercise caution when handling the dispenser, especially when full, due to its weight.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Do not use abrasive cleaners or scouring pads, as they can scratch the stainless steel or polycarbonate surfaces.
• ຜະລິດຕະພັນນີ້ແມ່ນ ບໍ່ແມ່ນເຄື່ອງລ້າງຈານປອດໄພ. Hand wash all components.

3. ລາຍການຊິ້ນສ່ວນ

Before assembly, ensure all parts are present and undamaged:

1. ຖານສະແຕນເລດ
2. ຖາດ Drip ຖອດອອກໄດ້
3. Clear Polycarbonate Juice Container (2.2 Gallon capacity)
4. ຝາສະແຕນເລດ
5. Stainless Steel Ice Chamber (removable)
6. Spigot/Faucet Assembly

ຮູບທີ 1: Winco Stainless Steel Juice Dispenser, Model 902. Shows the complete assembled unit including the base, clear container, lid, and spigot.

4. ການຕິດຕັ້ງແລະການປະກອບ

Follow these steps to assemble your juice dispenser:

1. ແກະກ່ອງ: Carefully remove all components from the packaging. Retain packaging for future storage if desired.
2. ສະອາດ: Before first use, wash all parts that will come into contact with beverages (juice container, lid, ice chamber, spigot) with warm, soapy water. Rinse thoroughly and dry completely.
3. Assemble Spigot: Ensure the spigot is securely attached to the juice container. If it requires assembly, follow the instructions provided with the spigot. Ensure all washers and nuts are tightened to prevent leaks.
4. Place Drip Tray: Position the removable drip tray onto the stainless steel base.
5. Position Juice Container: Carefully place the clean polycarbonate juice container onto the stainless steel base, ensuring it sits securely above the drip tray.
6. Insert Ice Chamber: If using, fill the stainless steel ice chamber with ice cubes and insert it into the center of the juice container.
7. ເພີ່ມເຄື່ອງດື່ມ: Pour your desired cold beverage into the polycarbonate container. Do not overfill.
8. ຝາປິດສະຖານທີ່: Securely place the stainless steel lid on top of the juice container.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Using your Winco Juice Dispenser is straightforward:

1. Ensure the dispenser is fully assembled and filled with your cold beverage.
2. To dispense, push the spigot lever down. The beverage will flow out.
3. To stop dispensing, release the spigot lever.
4. Monitor the ice chamber and refill with ice as needed to maintain beverage temperature.
5. Regularly check the drip tray and empty it when full to prevent overflow.

6. ການບໍາລຸງຮັກສາແລະການທໍາຄວາມສະອາດ

Proper cleaning and maintenance will extend the life of your dispenser.

ທໍາຄວາມສະອາດປະຈໍາວັນ:

1. ຫວ່າງ: After each use, empty any remaining beverage from the container.
2. Disassemble: Remove the lid, ice chamber, and juice container from the base. Detach the spigot from the container. Empty the drip tray.
3. ລ້າງ: Hand wash all components (juice container, lid, ice chamber, spigot, drip tray) with warm water and a mild, non-abrasive dish soap. Use a soft cloth or sponge. For the spigot, ensure thorough cleaning to prevent residue buildup.
4. ລ້າງ: Rinse all parts thoroughly with clean water to remove all soap residue.
5. ແຫ້ງ: Dry all components completely with a soft, clean cloth to prevent water spots and rust on stainless steel parts. Allow the polycarbonate container to air dry fully before reassembly or storage.
6. ຖານ​ຄວາມ​ສະ​ອາດ​: Wipe down the stainless steel base with a damp ຜ້າແລະແຫ້ງທັນທີ.

ການເກັບຮັກສາ:

Store the disassembled, clean, and dry dispenser in a cool, dry place. Avoid stacking heavy items on the polycarbonate container to prevent damage.

7. ການແກ້ໄຂບັນຫາ

ນີ້ແມ່ນວິທີແກ້ໄຂບັນຫາທົ່ວໄປທີ່ເຈົ້າອາດຈະພົບ:

• Leakage from Spigot:
  ການແກ້ໄຂ: Ensure the spigot is properly installed and tightened. Check that all rubber washers are correctly seated and not damaged. If the spigot is old or damaged, it may need replacement.
• Slow Dispensing:
  ການແກ້ໄຂ: Check if the beverage contains pulp or fruit pieces that might be clogging the spigot. Clean the spigot thoroughly. Ensure the ice chamber is not obstructing the flow.
• Beverage Not Staying Cold:
  ການແກ້ໄຂ: Ensure the ice chamber is filled with sufficient ice. Replace melted ice regularly. The dispenser is designed for temporary chilling, not long-term refrigeration.
• Cloudy Polycarbonate Container:
  ການແກ້ໄຂ: This can occur from using abrasive cleaners or hard water. Use only mild soap and soft cloths for cleaning. For hard water stains, a solution of white vinegar and water can help, followed by thorough rinsing.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support regarding your Winco Stainless Steel Juice Dispenser, Model 902, please refer to the documentation included with your purchase or contact Winco customer service directly. Contact details can typically be found on the manufacturer's official webເວັບໄຊ ຫຼືຢູ່ໃນໃບຮັບເງິນຊື້ຂອງທ່ານ.