InFocus IN1102 Ultra Mobile Widescreen DLP Projector User Manual

ແນະນຳ

This manual provides comprehensive instructions for the setup, operation, and maintenance of your InFocus IN1102 Ultra Mobile Widescreen DLP Projector. Please read this manual thoroughly before using the projector to ensure proper functionality and to maximize its performance and lifespan.

The InFocus IN1102 is designed for portability and performance, featuring WXGA native resolution, 2200 lumens brightness, and DisplayLink™ USB connectivity for simplified setup.

ແມ່ນຫຍັງຢູ່ໃນກ່ອງ

Upon unpacking your InFocus IN1102 projector, please verify that all the following items are included:

• InFocus IN1102 Projector
• ສາຍໄຟ
• Navigator II Remote
• USB (A to mini-B) Cable
• ສາຍ VGA
• ກະເປົາຖື

ສິນຄ້າເກີນview

Familiarize yourself with the various components and connection points of your InFocus IN1102 projector.

ຮູບ 1: ດ້ານຫນ້າ View with Lens Cap. This image shows the front of the InFocus IN1102 projector, featuring the lens covered by a protective cap and the InFocus logo prominently displayed. The ventilation grille is visible on the left side.

ຮູບ 2: ດ້ານຫນ້າ View without Lens Cap. This image displays the front of the projector with the lens cap removed, revealing the projector lens. The InFocus branding and ventilation are clearly visible.

Figure 3: Rear Panel with Connectivity Ports. The rear panel of the InFocus IN1102 is shown, highlighting the various input ports including DisplayLink USB, VGA (Computer 1 and Computer 2), Video 1 (S-Video), Video 2 (Composite), and Audio In. The power input socket is on the far left.

Figure 4: Top Panel and Control Keypad. ຮູບ​ພາບ​ນີ້​ສະ​ຫນອງ​ເທິງ​ລົງ​ລຸ່ມ​ view ຂອງໂປເຈັກເຕີ, showcasing the LiteTouch™ control panel with buttons for power, auto image, keystone, menu, select, volume, and source selection. The InFocus logo is centered on the top surface.

ຮູບທີ 5: ມຸມ View with Adjustable Foot. An angled perspective of the projector, illustrating the front adjustable foot extended for tilt adjustment. The lens and front ventilation are visible.

ຕັ້ງຄ່າ

1. ການຈັດວາງ: Position the projector on a stable, flat surface. Ensure adequate ventilation around the unit. Adjust the front foot to achieve the desired projection angle.
2. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the supplied power cord to the projector's power input socket (refer to Figure 3) and then to a grounded electrical outlet.
3. Connecting a Source:
   • DisplayLink™ USB: For quick setup, connect the USB (A to mini-B) cable from your computer's USB port to the "Computer 1 DisplayLink" USB port on the projector (refer to Figure 3). This eliminates the need for a separate VGA cable and simplifies configuration.
   • VGA: Connect the supplied VGA cable from your computer's VGA output to either the "Computer 1" or "Computer 2" VGA input on the projector (refer to Figure 3).
   • ການປ້ອນຂໍ້ມູນວິດີໂອ: For standard video sources, use the "Video 1" (S-Video) or "Video 2" (Composite) inputs. Connect audio using the "Audio In" port if necessary.
4. ເປີດ: Press the power button on the projector's control panel (refer to Figure 4) or the remote control. The projector will initiate its startup sequence.
5. ການ​ປັບ​ຈຸດ​ສຸມ​: ໝຸນວົງການໂຟກັສໃສ່ເລນໂປເຈັກເຕີຈົນກວ່າພາບທີ່ຄາດໄວ້ຈະຄົມຊັດ ແລະຊັດເຈນ.

ຄໍາແນະນໍາການດໍາເນີນງານ

Powering On/Off (LiteSwitch™)

The InFocus IN1102 features LiteSwitch™ technology for instant power on and off. Press the power button once to turn the projector on. To turn it off, press the power button again. There is no "cool down" period required, allowing for faster transitions between meetings.

Using the LiteTouch™ Keypad

The backlit LiteTouch™ control panel on the top of the projector (Figure 4) provides direct access to common functions:

• ປຸ່ມເປີດປິດ: ເປີດ ຫຼືປິດໂປຣເຈັກເຕີ.
• ຮູບພາບອັດຕະໂນມັດ: Automatically optimizes the image settings for the current input source.
• Keystone: Adjusts the image to correct for trapezoidal distortion if the projector is not perfectly perpendicular to the screen.
• ເມນູ: ເຂົ້າເຖິງເມນູສະແດງຜົນເທິງໜ້າຈໍ (OSD) ສຳລັບການຕັ້ງຄ່າຂັ້ນສູງ.
• ເລືອກ: Confirms selections within the OSD menu.
• ປະລິມານ: ປັບລະດັບສຽງອອກ.
• ທີ່ມາ: Cycles through available input sources (Computer 1, Computer 2, Video 1, Video 2).

DisplayLink™ Connectivity

When using DisplayLink™ via USB, the projector automatically detects the connection and displays content from your computer. This technology simplifies setup by eliminating the need for complex display settings on your computer.

Image Orientation for Mounting

The InFocus IN1102 supports horizontal image flipping for rear projection setups. However, it does not include a built-in vertical image flip option for ceiling-mounted installations. If ceiling mounting is desired, third-party software on the connected computer may be required to invert the image vertically. Please consult your computer's operating system or display driver settings for this functionality.

ບໍາລຸງຮັກສາ

ການເຮັດຄວາມສະອາດໂປເຈັກເຕີ

• ພາຍນອກ: ໃຊ້ຜ້າແພທີ່ອ່ອນໆ ທີ່ບໍ່ມີເສັ້ນດ່າງ dampened with water or a mild, non-abrasive cleaner to wipe the projector's casing. Avoid harsh chemicals.
• ເລນ: Gently clean the projector lens with a lens cleaning cloth or a soft, dry, lint-free cloth. Do not use abrasive materials or excessive force.

ການອອກແບບທີ່ບໍ່ມີການກັ່ນຕອງ

The InFocus IN1102 utilizes DLP® technology with a filter-free design, which reduces the need for regular filter cleaning or replacement, simplifying maintenance.

ການແກ້ໄຂບັນຫາ

ຖ້າເຈົ້າພົບບັນຫາກັບໂປເຈັກເຕີຂອງເຈົ້າ, ໃຫ້ອ້າງອີງເຖິງບັນຫາ ແລະວິທີແກ້ໄຂບັນຫາທົ່ວໄປຕໍ່ໄປນີ້:

• ບໍ່ມີຮູບພາບທີ່ສະແດງ:
  • ໃຫ້ແນ່ໃຈວ່າໂປເຈັກເຕີເປີດຢູ່ ແລະ lamp ແມ່ນ illuminated.
  • Verify that the video cable (USB or VGA) is securely connected to both the projector and the source device.
  • Press the "Source" button on the projector or remote to cycle through input sources until the correct one is selected.
  • Check your computer's display settings to ensure the external display is enabled or duplicated.
• ຮູບພາບແມ່ນມົວ:
  • ປັບວົງການໂຟກັສໃສ່ເລນໂປເຈັກເຕີ.
  • Ensure the projection surface is flat and the projector is at an appropriate distance.
• Image is Trapezoidal (Wider at Top/Bottom):
  • Use the "Keystone" adjustment on the control panel to correct the image shape.
  • Ideally, position the projector perpendicular to the screen to minimize keystone correction.
• ບໍ່ມີສຽງ:
  • Ensure the audio cable is connected if using VGA or video inputs. DisplayLink™ USB typically carries audio.
  • Adjust the volume using the projector's controls or the remote.
  • ກວດເບິ່ງການຕັ້ງຄ່າສຽງອອກໃນອຸປະກອນແຫຼ່ງຂອງທ່ານ.

For further assistance, please refer to the InFocus support webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າ.

ຂໍ້ມູນຈໍາເພາະ

Key technical specifications for the InFocus IN1102 projector:

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The InFocus IN1102 projector comes with the following limited warranty:

• ຊິ້ນສ່ວນ: 5 ປີ
• ແຮງງານ: 2 ປີ
• Lamp: 6 ເດືອນ

For warranty claims, technical support, or additional product information, please visit the official InFocus webຫຼື ຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ເກັບໃບຮັບເງິນຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ເພື່ອການກວດສອບການຮັບປະກັນ.