1. ຜະລິດຕະພັນເກີນview
The KOHLER Clicker Drain is designed to complete your faucet installation, providing a reliable and durable drainage solution for sinks without an overflow. This pop-up drain features a brass tailpiece and a standard 1-1/4-inch connection, ensuring compatibility with many standard lavatory sinks.
Image 1.1: Assembled KOHLER Clicker Drain without overflow. This image displays the complete drain unit, including the top clicker mechanism and the lower tailpiece, ready for installation.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ການກໍ່ສ້າງທອງເຫຼືອງແຂງ: Ensures durability and long-term reliability.
- Without Overflow: Specifically designed for sinks that do not have an overflow hole.
- 1-1/4-inch Connection: Standard size for broad compatibility with plumbing systems.
- Fluid Design Lines: Facilitates ease of cleaning and maintenance.
2. ຄໍາແນະນໍາການຕິດຕັ້ງ
Proper installation is crucial for the optimal performance of your KOHLER Clicker Drain. Follow these steps carefully.
ເຄື່ອງມືແລະວັດສະດຸທີ່ຕ້ອງການ:
- Adjustable Wrench or Basin ປະແຈ
- Putty ຫຼື Silicone Sealant ຂອງ Plumber
- Clean Cloths
- Bucket (for catching water)
- ແວ່ນຕາຄວາມປອດໄພ
ຮູບພາບທີ 2.1: ຖອດປະກອບ view of the KOHLER Clicker Drain components. This image shows the individual parts of the drain, including the top clicker cap, upper flange, gaskets, and tailpiece, which are assembled during installation.
ຂັ້ນຕອນການຕິດຕັ້ງ:
- ການກະກຽມການເປີດ Sink: Ensure the sink drain opening is clean and free of old sealant or debris.
- Apply Sealant to Flange: Apply a thin bead of plumber's putty or silicone sealant around the underside of the drain flange (the top part that sits in the sink).
- ໃສ່ໜ້າແປນລະບາຍນ້ຳ: Insert the drain flange through the sink opening from the top. Press firmly to create a seal.
- Assemble from Below: From underneath the sink, slide the rubber gasket, then the friction washer, and finally the locknut onto the drain body.
- Tighten Locknut: Hand-tighten the locknut, then use an adjustable wrench to tighten it further. Do not overtighten, as this can damage the sink or drain. Ensure the drain is centered and straight.
- ເຊື່ອມຕໍ່ສ່ວນປາຍ: Attach the brass tailpiece to the bottom of the drain body. Ensure all connections are secure and properly sealed.
- ເຊື່ອມຕໍ່ກັບ P-Trap: Connect the drain tailpiece to your existing P-trap assembly. Use appropriate washers and tighten connections to prevent leaks.
- ການທົດສອບສໍາລັບການຮົ່ວໄຫລ: Fill the sink with water and then release it, carefully checking all connections for any signs of leakage. Tighten connections as needed.
3. ການດໍາເນີນງານ
The KOHLER Clicker Drain features a simple push-button mechanism for opening and closing the drain.
- ເພື່ອປິດທໍ່ລະບາຍນໍ້າ: Press down firmly on the top cap of the drain. The mechanism will click, and the drain will seal, allowing the sink to hold water.
- ເພື່ອເປີດ Drain: Press down firmly on the top cap of the drain again. The mechanism will click, and the drain will open, allowing water to flow out.
4. ການບໍາລຸງຮັກສາແລະການດູແລ
Regular cleaning and maintenance will help preserve the finish and functionality of your KOHLER Clicker Drain.
ທໍາຄວາມສະອາດ:
- ໃຊ້ອ່ອນ, ງamp cloth and mild soap to clean the visible parts of the drain.
- ຫຼີກລ່ຽງນໍ້າຢາເຮັດຄວາມສະອາດທີ່ມີສີຂັດ, ຜ້າຂັດ, ຫຼື ສານເຄມີຮຸນແຮງ ເພາະສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍສີຜິວໄດ້.
- For stubborn mineral deposits, use a solution of white vinegar and water, applied with a soft cloth, then rinse thoroughly.
- Periodically remove the clicker cap (it usually unscrews) to clean any hair or debris that may accumulate in the drain body.
ການກວດກາປົກກະຕິ:
- Periodically check under the sink for any signs of leaks around the drain connections.
- Ensure the clicker mechanism operates smoothly. If it becomes stiff, cleaning the internal components may be necessary.
5. ການແກ້ໄຂບັນຫາ
ເບິ່ງຕາຕະລາງຂ້າງລຸ່ມນີ້ສໍາລັບບັນຫາທົ່ວໄປແລະການແກ້ໄຂທີ່ເປັນໄປໄດ້ຂອງພວກເຂົາ.
| ສະບັບ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ລະບາຍນ້ຳຊ້າໆ | Hair or debris accumulation in the drain body or P-trap. | Remove the clicker cap and clear any obstructions. Clean the P-trap if necessary. |
| Drain Leaks Under Sink | ການເຊື່ອມຕໍ່ວ່າງຫຼື gaskets ນັ່ງບໍ່ຖືກຕ້ອງ. | Tighten locknut and tailpiece connections. Inspect and reseat gaskets if damaged, replace if necessary. |
| Clicker Mechanism Not Working | Debris under the clicker cap or worn mechanism. | Remove and clean the clicker cap and its housing. If the issue persists, the internal mechanism may need replacement. |
| Water Not Sealing (Drain Won't Hold Water) | Debris preventing the stopper from sealing or a faulty stopper gasket. | Clean the stopper and the drain opening thoroughly. Inspect the stopper's gasket for damage and replace if needed. |
6. ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ
Detailed specifications for the KOHLER Clicker Drain Without Overflow, Model 7124-BN.
| ຂໍ້ມູນຈໍາເພາະ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 7124-BN |
| ວັດສະດຸ | ທອງເຫຼືອງ |
| ສໍາເລັດຮູບພາຍນອກ | Brass, Nickel (Vibrant Brushed Nickel) |
| ຂະໜາດການເຊື່ອມຕໍ່ຂາເຂົ້າ | 1.25 ນິ້ວ |
| ປະເພດການເຊື່ອມຕໍ່ຂາເຂົ້າ | ກະທູ້ |
| ຂະໜາດການເຊື່ອມຕໍ່ຂາອອກ | 1.25 ນິ້ວ |
| ປະເພດການເຊື່ອມຕໍ່ຂາອອກ | NPT |
| ຂະໜາດສິນຄ້າ (L x W x H) | 9.75 x 4.75 x 4 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 1 ປອນ |
| ວິທີການຕິດຕັ້ງ | Lavatory Sink |
| UPC | 650531422910 |
7. ຂໍ້ມູນການຮັບປະກັນ
This KOHLER product is covered by a Lifetime Limited Warranty. For specific terms, conditions, and details of the warranty, please refer to the official Kohler website or contact Kohler customer service. The warranty typically covers defects in material and workmanship under normal residential use.
8. ການຊ່ວຍເຫຼືອລູກຄ້າ
For further assistance, technical support, or to inquire about replacement parts, please contact Kohler customer service. You can find contact information, FAQs, and additional resources on the official Kohler webເວັບໄຊ: