Beka T&T Exacto Timer with Thermometer User Manual

ແນະນຳ

Thank you for choosing the Beka T&T Exacto Timer with Thermometer. This device is designed to assist you in precise cooking by monitoring temperatures and timing processes. It features a durable stainless steel construction and a clear LCD display. Please read this manual carefully before using the product to ensure proper operation and longevity.

Image of the Beka T&T Exacto Timer with Thermometer, showing its stainless steel body and digital display.

ຕັ້ງຄ່າ

1. ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​: Locate the battery compartment on the back of the unit. Insert the required batteries (not included) according to the polarity indicators (+/-). Close the compartment securely.
2. ການເຊື່ອມຕໍ່ Probe: Connect the stainless steel temperature probe cable into the designated port on the side or back of the main unit. Ensure a firm connection.
3. ການຈັດວາງເບື້ອງຕົ້ນ: Place the main unit on a stable surface or use its integrated stand/magnet (if available) for convenient viewing. Ensure the probe cable is not kinked or exposed to direct heat sources beyond its intended use.

ຄໍາແນະນໍາການດໍາເນີນງານ

The Beka T&T Exacto Timer with Thermometer offers both temperature monitoring and timing functions.

ການວັດແທກອຸນຫະພູມ

1. ເປີດ: The device typically powers on automatically once batteries are installed and the probe is connected. Note that this model may not feature a dedicated power switch; to turn off, the battery may need to be removed.
2. ການຄັດເລືອກໜ່ວຍ: Use the “°C/°F” button to switch between Celsius and Fahrenheit temperature readings.
3. ການໃສ່ການສືບສວນ: Carefully insert the stainless steel probe into the center of the food item you wish to measure, avoiding bones or fat. For liquids, ensure the probe tip is fully submerged.
4. ອຸນຫະພູມການອ່ານ: The current temperature will be displayed on the LCD screen. The device can measure temperatures up to 250 °C (482 °F).

ຟັງຊັນຈັບເວລາ

1. ຕັ້ງເວລາຈັບເວລາ: Use the “MIN” and “SEC” buttons to set the desired countdown time. The timer can be programmed up to 99 minutes and 59 seconds.
2. ເລີ່ມໂມງຈັບເວລາ: ກົດປຸ່ມ "START/STOP" ເພື່ອເລີ່ມຕົ້ນການນັບຖອຍຫຼັງ.
3. ຢຸດຊົ່ວຄາວ/ສືບຕໍ່: Press “START/STOP” again to pause or resume the timer.
4. ຣີເຊັດໂມງຈັບເວລາ: To reset the timer, press and hold the “MIN” and “SEC” buttons simultaneously, or press the “CLEAR” button if available.
5. ໂມງປຸກ: An audible alarm will sound when the countdown reaches zero. Press any button to silence the alarm.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຊັດຫົວຫນ່ວຍຕົ້ນຕໍດ້ວຍຜ້າອ່ອນ, damp cloth. Do not immerse the main unit in water. The stainless steel probe can be cleaned with warm, soapy water. Ensure the probe is completely dry before storage.
• ການເກັບຮັກສາ: Store the timer and probe in a clean, dry place when not in use. Avoid extreme temperatures and humidity.
• ການປ່ຽນແບັດເຕີຣີ: Replace batteries when the display becomes dim or the device stops functioning correctly. Always use the recommended battery type.

ການແກ້ໄຂບັນຫາ

• ບໍ່ມີຈໍສະແດງຜົນ/ອຸປະກອນບໍ່ເປີດ:
  • ກວດເບິ່ງການຕິດຕັ້ງຫມໍ້ໄຟແລະໃຫ້ແນ່ໃຈວ່າ polarity ທີ່ຖືກຕ້ອງ.
  • ປ່ຽນ​ແບັດ​ເຕີ​ຣີ​ເກົ່າ​ຫຼື​ທີ່​ໝົດ​ໄປ​ດ້ວຍ​ອັນ​ໃໝ່.
  • Ensure the probe is securely connected.
• ການອ່ານອຸນຫະພູມທີ່ບໍ່ຖືກຕ້ອງ:
  • Ensure the probe tip is fully inserted into the center of the food item and not touching bone or the bottom of a pan.
  • Verify the probe cable is not damaged.
  • Test the thermometer in boiling water (100 °C / 212 °F at sea level) or ice water (0 °C / 32 °F) to check calibration. If readings are consistently off, the probe or unit may require replacement.
• Timer Not Functioning:
  • ໃຫ້ແນ່ໃຈວ່າຫມໍ້ໄຟແມ່ນສົດແລະຕິດຕັ້ງຢ່າງຖືກຕ້ອງ.
  • Check that the time is set correctly before starting the countdown.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Beka webສະຖານທີ່ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ.