King WHF1210-W Wall Heater Instruction Manual

1. ຜະລິດຕະພັນເກີນview

The King WHF1210-W is a fan-forced wall heater designed for efficient spot heating in small rooms, apartments, bathrooms, and utility areas. This unit offers a compact and integrated heating solution, eliminating the need for bulky space heaters. It features two wattage options, 500W and 1000W, capable of heating areas up to 100 square feet. The design integrates seamlessly into your wall, resembling a standard central heating system register. For enhanced safety, the heater includes "Smart Limit Protection" which automatically shuts off the unit if it overheats.

Figure 1.1: King WHF1210-W Wall Heater installed in a residential setting, providing discreet heating.

2. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.

ຂໍ້ຄວນລະວັງຄວາມປອດໄພທົ່ວໄປ:

• ຄຳເຕືອນ: Risk of electric shock. Disconnect power at the service panel before installing or servicing this heater.
• ເຄື່ອງເຮັດຄວາມຮ້ອນນີ້ຮ້ອນເມື່ອໃຊ້ງານ. ເພື່ອຫຼີກເວັ້ນການໄໝ້, ຢ່າປ່ອຍໃຫ້ຜິວໜັງເປົ່າສຳຜັດກັບພື້ນຜິວທີ່ຮ້ອນ. ເກັບຮັກສາວັດສະດຸທີ່ຕິດໄຟໄດ້ ເຊັ່ນ: ເຟີນີເຈີ, ໝອນ, ຜ້າປູທີ່ນອນ, ເຈ້ຍ, ເຄື່ອງນຸ່ງຫົ່ມ ແລະ ຜ້າມ່ານ ຢ່າງໜ້ອຍ 3 ຟຸດ (0.9 ແມັດ) ຈາກດ້ານໜ້າຂອງເຄື່ອງເຮັດຄວາມຮ້ອນ ແລະ ຮັກສາໃຫ້ຫ່າງຈາກດ້ານຂ້າງ ແລະ ດ້ານຫຼັງ.
• ຄວາມລະມັດລະວັງທີ່ສຸດແມ່ນມີຄວາມຈໍາເປັນໃນເວລາທີ່ເຄື່ອງເຮັດຄວາມຮ້ອນໃດໆຖືກນໍາໃຊ້ໂດຍຫຼືຢູ່ໃກ້ກັບເດັກນ້ອຍຫຼືເດັກນ້ອຍທີ່ບໍ່ຖືກຕ້ອງແລະທຸກຄັ້ງທີ່ເຄື່ອງເຮັດຄວາມຮ້ອນຖືກປະໄວ້ແລະບໍ່ມີການເບິ່ງແຍງ.
• Do not operate any heater after it malfunctions, has been dropped, or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
• ຢ່າໃຊ້ນອກ.
• ເຄື່ອງເຮັດຄວາມຮ້ອນນີ້ບໍ່ໄດ້ມີຈຸດປະສົງໃນການ ນຳ ໃຊ້ໃນຫ້ອງນ້ ຳ, ບໍລິເວນຊັກຜ້າ, ແລະສະຖານທີ່ພາຍໃນທີ່ຄ້າຍຄືກັນ. ຢ່າຊອກຫາເຄື່ອງເຮັດຄວາມຮ້ອນບ່ອນທີ່ມັນອາດຈະຕົກລົງໄປໃນອ່າງອາບນ້ ຳ ຫລືພາຊະນະອື່ນໆ.
• ຢ່າແລ່ນສາຍໄຟພາຍໃຕ້ຜ້າພົມ. ຫ້າມປົກສາຍດ້ວຍຜ້າປູບ່ອນຖິ້ມ, ເຄື່ອງແລ່ນ, ຫຼືຜ້າປົກທີ່ຄ້າຍຄືກັນ. ຈັດວາງສາຍໄຟໃຫ້ຫ່າງຈາກພື້ນທີ່ຈະລາຈອນ ແລະບ່ອນທີ່ມັນຈະບໍ່ຖືກຂ້າມໄປ.
• ເພື່ອຕັດການເຊື່ອມຕໍ່ເຄື່ອງເຮັດຄວາມຮ້ອນ, ໃຫ້ປິດການຄວບຄຸມ, ຈາກນັ້ນຖອດປລັກອອກຈາກປລັກສຽບໄຟ.
• ຫ້າມສຽບ ຫຼື ອະນຸຍາດໃຫ້ສິ່ງຂອງຕ່າງປະເທດເຂົ້າໄປໃນທໍ່ລະບາຍອາກາດ ຫຼື ທໍ່ລະບາຍອາກາດ ເພາະອາດເຮັດໃຫ້ເກີດໄຟຊັອດ ຫຼື ໄຟໄໝ້ ຫຼື ເຮັດໃຫ້ເຄື່ອງເຮັດຄວາມຮ້ອນເສຍຫາຍໄດ້.
• ເພື່ອປ້ອງກັນໄຟທີ່ອາດຈະເກີດຂຶ້ນ, ຢ່າປິດກັ້ນການຮັບອາກາດຫຼືລະບາຍອາກາດໃນທາງໃດກໍ່ຕາມ. ຢ່າໃຊ້ພື້ນຜິວທີ່ອ່ອນນຸ້ມ, ຄືກັບຕຽງນອນ, ບ່ອນທີ່ຊ່ອງເປີດອາດຈະຖືກປິດກັ້ນ.
• ເຄື່ອງເຮັດຄວາມຮ້ອນມີສ່ວນທີ່ຮ້ອນ ແລະ arcing ຫຼື sparking ພາຍໃນ. ຢ່າໃຊ້ມັນຢູ່ໃນບ່ອນທີ່ມີນໍ້າມັນ, ທາສີ, ຫຼືໄອ ຫຼືນໍ້າທີ່ຕິດໄຟໄດ້ ຫຼືເກັບຮັກສາໄວ້.
• ໃຊ້ເຄື່ອງເຮັດຄວາມຮ້ອນນີ້ຕາມທີ່ອະທິບາຍໄວ້ໃນຄູ່ມືນີ້ເທົ່ານັ້ນ. ການ​ນໍາ​ໃຊ້​ອື່ນໆ​ທີ່​ບໍ່​ໄດ້​ແນະ​ນໍາ​ໂດຍ​ຜູ້​ຜະ​ລິດ​ອາດ​ຈະ​ເຮັດ​ໃຫ້​ເກີດ​ໄຟ​ໄຫມ້​, ໄຟ​ຟ້າ​ຊ໊ອກ​, ຫຼື​ບາດ​ເຈັບ​ຂອງ​ບຸກ​ຄົນ​.
• ສຽບເຄື່ອງເຮັດຄວາມຮ້ອນໂດຍກົງໃສ່ປລັກສຽບໃສ່ຝາ/ກ່ອງຮັບທຸກຄັ້ງ. ຫ້າມໃຊ້ກັບສາຍໄຟຂະຫຍາຍ ຫຼື ທໍ່ໄຟທີ່ສາມາດເຄື່ອນຍ້າຍໄດ້ (ປລັກສຽບໄຟ/ສາຍໄຟ).

3. ຄໍາແນະນໍາການຕິດຕັ້ງ

Proper installation is crucial for the safe and efficient operation of your King WHF1210-W wall heater. If you are unsure about wiring or installation, consult a qualified electrician.

ລາຍການກວດສອບກ່ອນການຕິດຕັ້ງ:

• Ensure power is disconnected at the circuit breaker before beginning any work.
• Verify that the electrical supply matches the heater's requirements (120V).
• Choose a suitable wall location, away from combustible materials and water sources.
• Ensure adequate clearance around the heater for proper airflow.

ຂັ້ນ​ຕອນ​ການ​ຕິດ​ຕັ້ງ​:

1. ກະກຽມການເປີດຝາ: Create an opening in the wall according to the dimensions specified in the "Specifications" section. Ensure there are no studs or obstructions.
2. Mount the Wall Can: Insert the heater's wall can into the prepared opening. Secure it firmly to the wall studs using appropriate fasteners.
3. Wire the Heater: Connect the electrical supply wires to the heater's terminal block. Follow local electrical codes and the wiring diagram provided with the unit. Ensure all connections are tight and secure.
4. Install the Heating Assembly: Carefully slide the heating assembly (fan and element) into the wall can. Ensure it is properly seated and secured.
5. ຄັດຕິດ Grille: Secure the front grille to the heating assembly using the provided screws.
6. ຟື້ນຟູພະລັງງານ: ເມື່ອການຕິດຕັ້ງສໍາເລັດແລະການເຊື່ອມຕໍ່ທັງຫມົດຖືກກວດສອບ, ຟື້ນຟູພະລັງງານຢູ່ທີ່ຕົວຕັດວົງຈອນ.

Figure 3.1: Components of the King WHF1210-W Wall Heater, showing the grille, fan assembly, and wall can for installation.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

The King WHF1210-W wall heater is designed for simple and effective heating. It features an electronic thermostat for precise temperature control and wattage ການ​ຄັດ​ເລືອກ​.

ເປີດ/ປິດ:

• ໃຫ້ແນ່ໃຈວ່າເຄື່ອງເຮັດຄວາມຮ້ອນຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງ ແລະ ເຊື່ອມຕໍ່ກັບແຫຼ່ງຈ່າຍໄຟ.
• Use the integrated electronic thermostat to turn the unit on or off.

ການ​ຕັ້ງ​ຄ່າ​ອຸນ​ຫະ​ພູມ​:

• Adjust the thermostat to your desired room temperature. The heater will cycle on and off to maintain this setting.

ວັດtage ການຄັດເລືອກ:

• This model offers 500W and 1000W heating options. Refer to the specific controls on your unit for selecting the desired wattage. ວັດທີ່ສູງຂຶ້ນtage provides faster heating for larger areas within its capacity.

Smart Limit Protection:

The heater is equipped with a "Smart Limit Protection" feature. If the unit detects an overheating condition, it will automatically shut off to prevent damage and ensure safety. If this occurs, turn off the heater, allow it to cool, and check for any obstructions to airflow before restarting.

5. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and efficient operation of your King WHF1210-W wall heater.

ທໍາຄວາມສະອາດ:

• ຄຳເຕືອນ: Disconnect power at the circuit breaker before cleaning the heater.
• ທຳຄວາມສະອາດພາຍນອກຂອງເຄື່ອງເຮັດຄວາມຮ້ອນເປັນໄລຍະໆດ້ວຍຜ້າອ່ອນໆ, ຖູ.amp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
• Gently vacuum the grille to remove dust and debris that may accumulate and obstruct airflow.

ການກວດກາ:

• Annually inspect the heater for any signs of damage, loose connections, or excessive dust buildup inside the unit. If any issues are found, consult a qualified technician.

6. ການແກ້ໄຂບັນຫາ

If your King WHF1210-W wall heater is not operating correctly, refer to the following common issues and solutions:

If you experience issues not listed here or if the suggested solutions do not resolve the problem, please contact King customer support or a qualified electrician.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຂໍ້ມູນການຮັບປະກັນ:

This King WHF1210-W wall heater comes with a ຮັບປະກັນ 1 ປີ from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty card included with your product or contact King customer support.

ການຊ່ວຍເຫຼືອລູກຄ້າ:

For technical assistance, troubleshooting, or warranty claims, please contact King customer support. You can find contact information on the official King Electric webເວັບໄຊ: www.king-electric.com.