WOLFCRAFT 5019000 Angle Grinder Cutting Stand

1. ບົດແນະນຳ

This manual provides essential information for the safe and effective use of your WOLFCRAFT 5019000 Angle Grinder Cutting Stand. This stand is designed to convert a standard 115mm or 125mm one-hand angle grinder into a precise cutting machine for metal workpieces. Please read these instructions carefully before assembly and operation to ensure proper function and safety.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

WARNING: Always observe general safety regulations for power tools and specific safety instructions for angle grinders when using this cutting stand. Failure to do so may result in serious injury or property damage.

• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນ (PPE) ທີ່ເຫມາະສົມສະເໝີ, ລວມທັງແວ່ນຕານິລະໄພ, ເຄື່ອງປ້ອງກັນການໄດ້ຍິນ, ແລະຖົງມື.
• Ensure the cutting stand is securely mounted to a stable workbench before use.
• Verify that the angle grinder is properly and securely attached to the stand according to the assembly instructions.
• Always disconnect the angle grinder from the power supply before making any adjustments, changing accessories, or performing maintenance.
• Keep hands and body parts clear of the cutting disc during operation.
• ໃຫ້ແນ່ໃຈວ່າຊິ້ນວຽກຖືກຍຶດຕິດຢ່າງແໜ້ນໜາamped ກ່ອນທີ່ຈະຕັດ.
• Do not overload the angle grinder or the cutting stand.
• ຮັກສາພື້ນທີ່ເຮັດວຽກໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ.
• Do not use the stand if any parts are damaged or missing.
• Only use cutting discs suitable for the material being cut and the angle grinder's specifications.

3. ເນື້ອໃນຊຸດ

The WOLFCRAFT 5019000 Angle Grinder Cutting Stand package includes:

• 1 x Angle Grinder Cutting Stand (main assembly)
• ປະສົມປະສານ clampໃນ​ອຸ​ປະ​ກອນ​
• ອຸປະກອນປະກອບ (ສະກູ, ນັອດ, ແຜ່ນຮອງ)
• ຄູ່ມືການສອນ

Note: Angle grinder and cutting discs are not included.

4. ການຕິດຕັ້ງແລະການປະກອບ

Follow these steps to assemble the cutting stand and mount your angle grinder:

1. Unpack ອົງປະກອບ: ເອົາທຸກພາກສ່ວນອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງແລະກວດສອບກັບບັນຊີລາຍຊື່ເນື້ອໃນຂອງຊຸດ.
2. ປະ​ກອບ​ພື້ນ​ຖານ​: Attach the main support arm to the robust cast aluminum base plate using the provided hardware. Ensure all bolts are tightened securely.
3. ຕິດຕັ້ງ Clampອຸປະກອນ ing: Position the integrated clamping device on the base plate. The clamping jaws should be aligned parallel to the cutting path. Adjust and secure the movable jaw as needed.
   

   Figure 1: Adjustable clamping device for securing workpieces.

4. Mount the Angle Grinder:
   • Ensure your angle grinder is unplugged.
   • Remove any existing handles or guards from the angle grinder that might interfere with mounting.
   • Position the angle grinder into the stand's mounting bracket. The stand is compatible with 115mm and 125mm one-hand angle grinders.
   • Secure the angle grinder firmly using the stand's fastening mechanisms. Ensure the cutting disc is centered and perpendicular to the base plate. Adjust the angle grinder's position within the bracket to achieve optimal alignment.
   • Attach the safety guard provided with the stand, ensuring it covers the cutting disc appropriately.
   

   Figure 2: Angle grinder mounted on the cutting stand.

5. Secure to Workbench: For maximum stability and safety, it is highly recommended to bolt or clamp the cutting stand to a sturdy workbench. The base plate has pre-drilled holes for this purpose.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once the stand is assembled and the angle grinder is securely mounted, follow these steps for safe operation:

1. ກະກຽມຊິ້ນວຽກ: Measure and mark the cutting line on your metal workpiece.
2. Clamp the Workpiece: Place the workpiece on the stand's base plate, aligning the marked cutting line with the angle grinder's cutting disc. Use the integrated clamping device to firmly secure the workpiece. Ensure it cannot shift during the cut.
   

   Figure 3: Cutting a square metal profile.

   

   Figure 4: Cutting a round metal pipe.

3. ເລີ່ມ​ຕົ້ນ​ການ​ຕັດ​:
   • Ensure the cutting disc is not touching the workpiece before starting the angle grinder.
   • Plug in the angle grinder and switch it on. Allow the disc to reach full speed.
   • Slowly and steadily lower the angle grinder handle to bring the rotating disc into contact with the workpiece. Apply gentle, consistent pressure.
   • Do not force the cut. Let the angle grinder and disc do the work.
   • Maintain a firm grip on the handle throughout the cutting process.
4. ເຮັດສຳເລັດການຕັດ: Once the cut is complete, lift the angle grinder handle back to its resting position. Switch off the angle grinder and wait for the disc to stop rotating completely before touching the workpiece or making any adjustments.
5. ເອົາ workpiece ອອກ: ບໍ່ຮວມamp the workpiece and carefully remove it. Be aware that cut metal can be hot and have sharp edges.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and safe operation of your cutting stand:

• ທໍາຄວາມສະອາດ: After each use, clean the stand to remove metal dust and debris. Use a brush or compressed air. Do not use solvents that may damage the material.
• ການກວດກາ: ກວດກາສະກູ, ນັອດ ແລະ ຊິ້ນສ່ວນທີ່ເຄື່ອນທີ່ທັງໝົດເປັນໄລຍະໆ ເພື່ອຄວາມແໜ້ນໜາ ແລະ ການສວມໃສ່. ຂັນສະກູທີ່ວ່າງໃຫ້ແໜ້ນ.
• ການລະບາຍສີ: Apply a light lubricant to moving parts of the clamping mechanism if they become stiff.
• ການເກັບຮັກສາ: Store the cutting stand in a dry, clean place, away from moisture and direct sunlight.
• Angle Grinder Maintenance: Refer to your angle grinder's instruction manual for its specific maintenance requirements.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your WOLFCRAFT 5019000 Cutting Stand, consider the following:

• ການຕັດທີ່ບໍ່ຖືກຕ້ອງ:
  • Ensure the angle grinder is securely mounted and aligned perpendicular to the base.
  • Verify the workpiece is clamped firmly and not shifting during the cut.
  • Check for excessive play in the stand's pivot points; tighten fasteners if necessary.
• ຄວາມບໍ່ໝັ້ນຄົງຂອງຂາຕັ້ງ:
  • Ensure the stand is bolted or clamped to a stable workbench.
  • ກວດເບິ່ງເຄື່ອງຍຶດຕິດທັງໝົດເພື່ອຄວາມແໜ້ນໜາ.
• ຄວາມຫຍຸ້ງຍາກ Clamping Workpiece:
  • ຮັບປະກັນ clamping jaws are clean and free of debris.
  • Lubricate the clamping screw if it is stiff.
  • Verify the workpiece dimensions are within the maximum clamping width (100 mm).

For issues not resolved by these steps, contact WOLFCRAFT customer support.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

WOLFCRAFT provides a 10-year guarantee for this product, reflecting its commitment to quality and durability. For warranty claims, technical support, or spare parts, please contact WOLFCRAFT customer service directly or visit their official webເວັບໄຊ.

Figure 5: WOLFCRAFT 10-Year Guarantee.